Abstract:Medium-entropy Zr–Nb–Ti (ZNT) alloys are being extensively investigated as load-bearing implant materials because of their exceptional biocompatibility and corrosion resistance, and low magnetic susceptibility. Nevertheless, enhancing their yield strength while simultaneously decreasing their elastic modulus presents a formidable obstacle, significantly constraining their broader utilization as metallic biomaterials. In this study, three medium-entropy ZNT alloys, i.e., Zr 45 Nb 45 Ti 10 , Zr 42.5 Nb 42.5 Ti 15 , and Zr 40 Nb 40 Ti 20 (denoted ZNT 10 , ZNT 15 , and ZNT 20 , respectively), were designed based on the miscibility gap in the ZNT phase diagram and prepared by annealing of cold-rolled ingots. Their microstructures, mechanical properties, wear resistance, corrosion resistance, magnetic susceptibility, and biocompatibility were systematically studied. Spinodal decomposition occurred in the cold-rolled ZNT 10 and ZNTi 15 after annealing at 650°C for 2 h and resulted in nanoscale Zr-rich β 1 and (Nb, Ti)-rich β 2 phases, which significantly improved their yield strength and reduced their elastic modulus. The wear resistance of the alloys decreased with an increase in Ti content. Dense ZrO 2 , Nb 2 O 5 , and TiO 2 oxide layers were formed during the polarization process in Hanks' solution, which enhanced the corrosion resistance of the alloys. These ZNT alloys exhibited significantly lower magnetic susceptibility than medical Ti alloys. The ZNT alloys showed a cell viability of more than 94 % toward MG-63 cells after culturing for 3 d. Overall, the spinodal ZNT 15 showed the best combination of mechanical properties, wear resistance, corrosion resistance, low magnetic susceptibility, and sufficient biocompatibility among the three alloys. Statement of Significance This work reports on medium-entropy Zr–Nb–Ti (ZNT) alloys with heterostructure. Spinodal decomposition significantly improved their mechanical strength and reduced the elastic modulus of the alloys. The wear resistance of the ZNT alloys decreased with an increase in Ti content. Dense ZrO 2 , Nb 2 O 5 , and TiO 2 oxide layers were formed during the polarization process in Hanks' solution, which enhanced the corrosion resistance of the alloys. The ZNT alloys exhibited significantly lower magnetic susceptibility than medical Ti alloys. The ZNT alloys showed a cell viability of more than 94% toward MG-63 cells after culturing for 3 d. The results demonstrate that spinodal ZNT alloys have enormous potential as bone-implant materials due to their outstanding overall mechanical properties, high corrosion resistance, wear resistance, low magnetic susceptibility, and sufficient biocompatibility.

A Comparative in Vitro Study on Biomedical Zr–2.5X (X = Nb, Sn) Alloys

Screening on Binary Zr-1x (X = Ti, Nb, Mo, Cu, Au, Pd, Ag, Ru, Hf and Bi) Alloys with Good in Vitro Cytocompatibility and Magnetic Resonance Imaging Compatibility

Development and properties of dental Ti–Zr binary alloys

Microstructure, corrosion behavior and cytotoxicity of Zr–Nb alloys for biomedical application

Microstructure, Mechanical Property, Corrosion Behavior, and in Vitro Biocompatibility of Zr-Mo Alloys

Microstructure and mechanical properties of as-cast Zr–Nb alloys

Novel Biocompatible Zr-Based Alloy with Low Young’s Modulus and Magnetic Susceptibility for Biomedical Implants

Novel MRI-compatible Zr–Mo–Nb alloys with superior mechanical performance, high corrosion resistance and good cytocompatibility for biomedical applications

Spinodal Zr–Nb alloys with ultrahigh elastic admissible strain and low magnetic susceptibility for orthopedic applications

A study of mechanical and magnetic properties in a metastable Zr–10Nb–6Sn alloy for MRI-compatible hard tissue replacements

Zr-xNb-4Sn Alloys with Low Young’s Modulus and Magnetic Susceptibility for Biomedical Implants

Effect of Sn on elastic modulus and magnetic susceptibility of Zr-16Nb- x Ti ( x =4 wt%, 6 wt%) alloys

Design and development of novel MRI compatible zirconium- ruthenium alloys with ultralow magnetic susceptibility

Microstructures and Properties of Biomedical Mg-Zn-Sn-Zr Rolled Alloys

The Effect of Zr Content on the Microstructure, Mechanical Properties and Cell Attachment of Ti-35nb-Xzr Alloys

Elaboration of Ti-based Biocompatible Alloys Using Nb, Fe and Zr as Alloying Elements

Evaluation of As‐extruded Ternary Zn–Mg–Zr Alloys for Biomedical Implantation Material: in Vitro and in Vivo Behavior

Corrosion behavior of new ternary zirconium alloys as alternative materials for biomedical applications

Microstructure, mechanical and corrosion properties of biodegradable Zn-Mg-Zr alloys for biomedical applications

Preparation, Mechanical Properties, and Degradation Behavior of Zn-1Fe- x Sr Alloys for Biomedical Applications

Medium-entropy Zr–Nb–Ti alloys with low magnetic susceptibility, high yield strength, and low elastic modulus through spinodal decomposition for bone-implant applications