Abstract:Micrometer-sized single crystal cathodes have garnered significant interest as promising cathode materials for lithium-ion batteries due to their ability to reduce surface area exposure to electrolytes and suppress side reactions, thereby enhancing electrochemical performance. One of the challenging issues with single crystal cathode materials is synthesizing monodisperse and discrete single crystals rather than agglomerated quasi-single crystals. However, conventional solid-state synthesis of most single crystals results in severe agglomeration and cation mixing, as it requires high temperatures to promote particle growth to several micrometers. In this study, a novel morphology-conserving reaction strategy that employs octahedron single crystal intermediates is introduced to synthesize discrete, monodisperse LiNi0.97Co0.02Mn0.01O2 octahedron single crystals. This scalable and cost-effective approach involves using rock-salt Ni0.97Co0.02Mn0.01O1+x octahedrons as single crystal intermediates, which are transformed in unreactive unary lithium salt melts (LiCl and Li2SO4) from spherical Ni0.97Co0.02Mn0.01(OH)2 obtained via coprecipitation. These intermediates are then subjected to a stoichiometric amount of Li precursor in a conventional solid-state synthesis to produce layered LiNi0.97Co0.02Mn0.01O2. This process is a morphology-conserving lithiation reaction, leading to the formation of discrete and monodisperse LiNi0.97Co0.02Mn0.01O2 octahedron single crystals. The resultant LiNi0.97Co0.02Mn0.01O2 single crystals demonstrate superior electrochemical performance, including stable capacity retention over 150 cycles, which surpasses that of typical quasi-single crystals produced through conventional methods. This is attributed to negligible crack formation during cycling, in contrast to significant cracking observed in conventional quasi-single crystals. This implies that single-crystal forms are preferred over agglomerated quasi-single crystal forms for enhancing cycle performance. These findings provide valuable insights into the industrial synthesis of discrete and monodisperse ultrahigh-nickel oxide cathode materials.

From Li2NiO3 to high-performance LiNiO2 cathodes for application in Li-ion and all-solid-state batteries

Cathode Materials of Li_xCo_(0.8)Ni_(0.2)O_2 for Lithium-ion Battery

From Li 2 NiO 3 to high-performance LiNiO 2 cathodes for application in Li-ion and all-solid-state batteries

Synthesis of LiNiO2 cathode materials with homogeneous Al doping at the atomic level

A gradient oxy-thiophosphate-coated Ni-rich layered oxide cathode for stable all-solid-state Li-ion batteries

Scalable Precursor-Assisted Synthesis of a High Voltage LiNiyCo1-yPO4 Cathode for Li-Ion Batteries

Outstanding electrochemical performances of the all-solid-state lithium battery using Ni-rich layered oxide cathode and sulfide electrolyte

Stabilizing lattice oxygen in slightly Li-enriched nickel oxide cathodes toward high-energy batteries

Synthesis of Monodisperse and Discrete Ultra-High Nickel LiNi0.97Co0.02Mn0.01O2 Octahedral Single Crystals via Single Crystal Intermediates for Li-Ion Batteries

Highly‐Dispersed Single‐Crystalline Ni‐Rich Cathodes with Low Li/O Loss for High‐Power and Long‐Life Li‐Ion Batteries

Synthetic Optimization and Electrochemical Properties of LiNi_(0.5)Mn_(0.5)O_2 Cathode Materials for Lithium-ion Batteries

A Molten-Salt Method to Synthesize Ultrahigh-Nickel Single-Crystalline LiNi0.92 Co0.06 Mn0.02 O2 with Superior Electrochemical Performance as Cathode Material for Lithium-Ion Batteries.

Molten Salt‐Assisted Synthesis of Single‐Crystalline Nonstoichiometric Li1+xNi1–xO2 with Improved Structural Stability

Rational Synthesis of High-Performance Ni-rich Layered Oxide Cathode Enabled Via Probing Solid-State Lithiation Evolution

Heterogeneous doping-induced surface reconstruction toward high-performance LiNiO2 cathode materials for lithium-ion batteries

Crack‐Free Single‐Crystalline LiNiO2 for High Energy Density All‐Solid‐State Batteries

Improved solid-state synthesis and electrochemical properties of LiNi0.6Mn0.2Co0.2O2 cathode materials for lithium-ion batteries

Structure and reaction mechanism of binary Ni-Al oxides as materials for lithium-ion battery anodes

Interphase Stabilization of LiNi0.5 Mn1.5 O4 Cathode for 5 V-Class All-Solid-State Batteries

Synthesis and performance study of Li_(1.1)Ni_(0.35)Mn_(0.55)O_2 cathode material of lithium-ion batteries

Synthesis And Electrochemical Performance Of Linixmn2-Xo4 Spinel As Cathode Material For Lithium Ion Batteries