Abstract:Hyperspectral LiDAR enables non-contact mapping of the 3D surface geometry of an object along with its spectral reflectance signature and has proved to be effective for automated point cloud segmentation in various remote sensing applications. The established hyperspectral LiDAR methods offer a range precision of a few mm to a few cm for distances exceeding several meters. We propose a novel approach to hyperspectral LiDAR scanning based on a supercontinuum (SC) coherently broadened from a 780 nm frequency comb. It provides high precision distance measurements along with target reflectance over the 570-970 nm range of the SC output. The distance measurements are carried out by monitoring the differential phase delay of intermode beat notes generated by direct photodetection, while the backscattered light spectrum is acquired using a commercial CCD spectrometer with 0.16 nm resolution across the 400 nm bandwidth of the SC output. We demonstrate a measurement precision below 0.1 mm for a stand-off range up to 50 m on a diffuse target with around 89% reflectance. The measured relative accuracy as compared to a reference interferometer is on the order of 10-5 for distances up to 50 m. Initial results also indicate spectrum-based material classification within a 3D point cloud using a linear support vector machine. The results highlight the potential of this approach for joint high-precision laser scanning and automated material classification.

Line-scan phase-resolved synthetic wavelength LiDAR using an off-axis holographic approach

Multi-Longitudinal-Mode High-Spectral-Resolution Lidar

Airborne Single-Photon LiDAR Towards a Small-Sized and Low-Power Payload

A Fully Solid-State Beam Scanner for FMCW LiDAR Application

A Hybrid Solid-State Beam Scanner for LiDAR Applications

Spectrally Scanning LiDAR Based on Wide-Angle Agile Diffractive Beam Steering

A Hybrid Solid-State Beam Scanner for FMCW LiDAR Application.

Non-Line-of-Sight Imaging and Vibrometry Using a Comb-Calibrated Coherent Sensor

Supercontinuum-based hyperspectral LiDAR for precision laser scanning

Design of supercontinuum laser hyperspectral light detection and ranging (LiDAR) (SCLaHS LiDAR)

Long Range 3D Imaging Through Atmospheric Obscurants Using Array-Based Single-Photon LiDAR.

Ultrafast Parallel Single-Pixel LiDAR with All-Optical Spectro-Temporal Encoding

Development of a near-infrared single-photon 3D imaging LiDAR based on 64×64 InGaAs/InP array detector and Risley-prism scanner

Single-photon 3D imaging of room-scale scenes through scattering media

Solid-state FMCW LiDAR with Two-Dimensional Spectral Scanning Using a Virtually Imaged Phased Array.

All-Time Single-Photon 3d Imaging Over 21 Km

High-Speed Two-Dimensional Spectral-Scanning Coherent LiDAR System Based on Tunable VCSEL

Risley-prism-based multi-beam scanning LiDAR for high-resolution three-dimensional imaging

Scanning single-pixel imaging lidar

Fast non-line-of-sight imaging with high-resolution and wide field of view using synthetic wavelength holography

All-solid-state spatial light modulator with independent phase and amplitude control for three-dimensional LiDAR applications