Abstract:Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Ahead of Print. The high strength-to-weight ratio and ease of manufacturing of composite materials make them widely used across a variety of industries. A commonly used method of improving composite structure load-bearing capacity is to employ carbon fiber-reinforced polymer (CFRP) cores. The mechanical properties of CFRP, however, vary in different directions due to its anisotropic behavior. Due to higher tensile strength along the fibers, anisotropy can lead to failure based on directions other than the fiber orientation. A thorough analysis of CFRP core failure modes has been conducted. Experimental analysis, finite element analysis, and micromechanical modeling techniques have been used in these studies. In this research, specific emphasis has been placed on understanding failure behavior under transverse loading conditions. Failure modes have been thoroughly examined in relation to geometric parameters such as interference, wedge angle, and friction coefficient. Modeling CFRP core failure and displacement behavior was carried out using FEA simulations to validate the research findings. A comparison of the obtained results with existing literature ensured that they were accurate and reliable. Additionally, response surface methodology was employed for optimization, aiming to minimize two critical factors: radial compressive stress and core displacement. By minimizing these factors, the performance and reliability of CFRP cores in applications related to grid capacity can be enhanced. The analysis of the research data revealed that the friction coefficient and interference play significant roles as interacting factors, albeit with opposite impacts on the stresses within the CFRP cores. The optimal values for interference and friction coefficient were found to be 0.0224 mm and 0.4, respectively, to minimize radial stress. Furthermore, the wedge angle exhibited a substantial influence on core displacement, with an optimal value of 3.5°.

Design, manufacturing and experimental validation of additive manufacturing cores for bearing seats in carbon fibre reinforced polymer structures

Development and Evaluation of a Novel Method for Reinforcing Additively Manufactured Polymer Structures with Continuous Fiber Composites

Additive manufacturing of continuous fibre reinforced thermoplastic composites using fused deposition modelling: Effect of process parameters on mechanical properties

Manufacturing and characterisation of a new thermal pre-stressed carbon fibre-reinforced lattice core for sandwich panels

Optimization of geometrical factors for enhanced performance of carbon fiber reinforced polymer cores under transverse loading

Experimental and numerical analysis of the consolidation process for additive manufactured continuous carbon fiber-reinforced polyamide 12 composites

Integrated computational modeling of large format additive manufacturing: Developing a digital twin for material extrusion with carbon fiber-reinforced acrylonitrile butadiene styrene

Design, Manufacturing, and Evaluation of Race and Automotive Prototypal Components Fabricated with Modified Carbon Fibres and Resin

A Study of Microstructural Tensile and Fatigue Properties Coupled with Digital Image Correlation of Hybrid Manufactured Inconel 718 Parts by Extrusion and Powder Bed Fusion

Initial performance assessment of 3D printed thin walled structures for spacecraft applications

Surface topology modification using 3D printing techniques to enhance the interfacial bonding strength between polymer substrates and prepreg carbon fibre-reinforced polymers

Tribological Performance of Additive Manufactured PLA-Based Parts

Enhancing the interfacial bonding strength between 3D-printed aluminium substrates and carbon fibre–reinforced polymers

Fused-Deposition Modeling 3D Printing of Short-Cut Carbon-Fiber-Reinforced PA6 Composites for Strengthening, Toughening, and Light Weighting

Numerical Simulation and Experimental Study of Carbon Fiber-Reinforced Polymer Single-Bar Extrusion Anchorage Structure

Design and strength optimisation of inserts embedded into fibre reinforced laminates

The role of additive manufacturing in the study of carbon fiber-reinforced polymer composite

Topology optimization for additive manufacturing of CFRP structures

Testing Protocol Development for the Fracture Toughness of Parts Built with Big Area Additive Manufacturing

Experimental Investigation of the Structural Performance of Composite Structures Produced using Additive Manufacturing

Second-Generation Implants for Load Introduction into Thin-Walled CFRP-Reinforced UHPC Beams: Implant Optimisation and Investigations of Production Technologies