Abstract:In this study, we proposed a novel composite anchorage that considers the anchoring performance and dimension simultaneously. The design concept of this composite anchorage was first introduced, followed by comparison with the traditional inner-cone bond-type anchorage and traditional composite anchorage through theoretical and experimental methods. Then, a parametric study was conducted to determine the influence of different parameters on the anchoring performance, and the optimal design parameters were recommended according to the finite element (FE) and test results. Finally, the practicability of the optimal design parameters were validated through experiments on the anchorage with multiple CFRP tendons. Results showed that the novel composite anchorage could improve the anchoring performance compared with the traditional inner-cone bond-type anchorage by promoting increased anchorage efficiency by 60.4% and, with an ideal failure mode of tendon rupture. Moreover, the novel composite anchorage had smaller dimensions and avoided the presence of a vulnerable position at the junction of the mechanical and bond parts compared with the traditional composite anchorage. In addition, a group of optimal design parameters of this composite anchorage with a pre-tightening force of 130 kN, an inclinational differential angle of 0.1°, an inclination angle of 2.9°, and an embedded length of 30 d~40 d were proposed. The composite anchorage with five CFRP tendons designed with the proposed parameters failed with the rupture of the tendons and exhibited an anchoring efficiency of 1.05. This result showed that the optimal parameters were suitable for this novel composite anchorage to grip multiple tendons. This study can provide an experimental and theoretical basis for designing large-tonnage anchorage for multiple FRP tendons used as hangers or cables in real bridges.

Management of an R&D planning process utilizing an advisory group

An Efficient Method for Culturing Human Breast Epithelium: Analysis of Results

Experimental and Numerical Study of Corrugated Anchors for CFRP Plates

Static Experimental Study on New Arc Multi-Tendon CFRP Cable Anchorage System

A novel anchor method for large tonnage CFRP cable: Anchorage design and full-scale experiment

Finite Element analysis and experimental study of static performance of multi‐CFRP tendon composite anchorage system

Structural Analyses of Extruded CFRP Tendon-Anchor System and Applications in Thin-Walled Aluminum/cfrp Bridge

Optimal Design of a Novel Composite Anchorage for Carbon-Fiber-Reinforced Polymer (CFRP) Tendons

An Experimental Study of Self-anchored Combined CFRP Cables

Novel Self-Anchored CFRP Cable System: Concept and Anchorage Behavior

[The bronchial and pulmonary manifestations of aspergillosis other than bronchiectatic aspergilloma].

Mechanical analysis of new-type arc-cone anchor for CFRP strand wires

Development and sensing performance study of a smart CFRP cable assembled by multi-group anchorage units

Experimental Research on Bonded Anchorage of Carbon Fiber Reinforced Polymer Prestressed Strands

Experimental Investigation of Fatigue Capacity of Bending-Anchored CFRP Cables

Cover Separation of CFRP Strengthened Beam-Type Cantilevers with Steel Bolt Anchorage

Development of an anchor system for thick CFRP plates: Experimental and numerical investigation

Effect of anchorages on C-FRCM/concrete interfacial shear performance

Mechanical Analysis of Stress Distribution in a Carbon Fiber-Reinforced Polymer Rod Bonding Anchor

Experimental investigation and damage evaluation of a novel bond type anchorage for carbon fiber reinforced polymer tendons

[Role of the Lutheran Non-Governmental Health Organization in tuberculosis control].