Abstract:Since municipal solid waste incineration bottom ash (MSWIBA) contains some heavy metals that are harmful to the groundwater and soil, this study proposes an effective and new approach to deal with high-volume MSWIBA. Selecting 70% MSWIBA, 10% ordinary Portland cement (OPC), 10% fly ash/ground granulated blast furnace slag (FA/GGBFS), and 1% volume of polypropylene (PP) fiber as the raw materials, this project designed and manufactured cold-bonded fiber aggregates (CBFAs) and applied them into sustainable concrete. It was found that the water absorption of CBFAs was between 12 and 14%, the bulk density was between 900 and 1100 kg/m3, and the compressive strength of single particle was greater than 1.8 MPa. And it was found that the mechanical strength and bulk density of CBFAs were positively correlated, while the mechanical strength and water absorption were negatively correlated. The leaching behaviors of CBFAs on Cu, Pb, Cd, and Cr were successfully suppressed to less than 1% of that originally from MSWIBA, which can be in line with the Chinese standards. Additionally, it is also found that the green concrete with adding GGBFS-CBFAs has higher overall fluidity and better mechanical properties than the concrete with FA-CBFAs. The mechanical properties of concrete were the best under the replacement rate of 60% of CFBAs, and the strength of green concrete added with GGBFS-CBFAs reached 96% of that of ordinary concrete. In this study, the rapid chloride ion penetration test, mercury intrusion and electron microscope tests found that the bonding effect between the CBFAs and the green concrete matrix was better, and the pore structure in the transition zone of the surrounding interface was refined. The proportion of transition pores in the pore structure was up to 59%. This shows that the concrete added with CBFAs has better resistance to chloride ion diffusion, and has some improvement on the durability. This research suggests that CBFAs including high volume MSWIBA has the potential to be successfully applied as the alternative to natural aggregates in sustainable concrete, and this can also advance waste recycling, and solidify high volume heavy metals in infrastructures.

Study on the Preparation and Performance of Lightweight Wallboards from MSWIBA Foam Concrete

Pore Structure, Hardened Performance and Sandwich Wallboard Application of Construction and Demolition Waste Residue Soil Recycled Foamed Concrete

Optimal Utilization of Low-Quality Construction Waste and Industrial Byproducts in Sustainable Recycled Concrete

Collaborative Disposal of Multisource Solid Waste: Influence of an Admixture on the Properties, Pore Structure and Durability of Foam Concrete

Performance Study of Foam Concrete Prepared by the Synergistic Utilization of Agricultural Waste and Coal Gangue Based on Double Orthogonal Experiments

Experimental Research on the Performance of Recycled Waste Concrete Powder (RWCP) on Concrete

Preparation and Modeling of Energy-Saving Building Materials by Using Industrial Solid Waste

Novel recycling application of high volume municipal solid waste incineration bottom ash (MSWIBA) into sustainable concrete

Thermal Conductivity of Fiber-Reinforced Foam Concrete Filled with Crumb Rubber Powders

Mechanical performance of prefabricated lightweight steel-foamed ceramsite concrete wall panels: Experimental and theoretical investigations

Influence of recycled powder derived from waste concrete on mechanical and thermal properties of foam concrete

Design and Preparation Technology of Green Multiple Solid Waste Cementitious Materials

Development and performance evaluation of alkali-activated multiple solid waste-based building foam insulation materials

Preparation of foam concrete from solid wastes: Physical properties and foam stability

Study on Alkali-Activated Prefabricated Building Recycled Concrete Powder for Foamed Lightweight Soils

Recycling of Municipal Solid Waste Incineration By-Product for Cement Composites Preparation

Studies on the Thermal-Physical Treatment of Waste Concrete for Use in Lightweight Aggregate Concrete

Multisource solid waste development of low-carbon ultra-light foamed insulation materials: A feasibility study

Study on Interface Bonding Properties between Foamed Ceramics and Foamed Concrete

Experimental Investigation on the Influencing Factors of Compressive Strength of Foamed Lightweight Material Utilizing Completely Decomposed Granite

Experimental study on seismic performance of new foam concrete composite wall panel based on nanomaterials