Abstract:During the last decade, due to an increase in anthropogenic activities, a higher environmental accumulation of heavy metals has been found, which has resulted in disturbed biogeochemical balance. Many kinds of remediation techniques have been practiced to mitigate heavy metal toxicity in the aqueous phase; however, adsorption is the most commonly accepted technique for efficient heavy metal removal. In this study, conocarpus waste was pretreated with 0%, 10%, and 20% kaolinite and pyrolyzed at 600 °C for 1 h to synthesize biochars (BC, BCK10, and BCK20, respectively), while hydrothermalized at 200 °C for 6 h to synthesize hydrochars (HC, HCK10, and HCK20, respectively). After characterization, synthesized materials were employed for the removal of cadmium (Cd), copper (Cu), lead (Pb), and zinc (Zn) from contaminated water. Experimental data was further subjected to isotherm and kinetic models to estimate the adsorption mechanism. Among all the tested adsorbents, kaolinite-synthesized materials revealed comparatively higher adsorption compared to pristine materials. It was found that pH 7 was optimum for the maximum removal of tested heavy metals. Adsorption of tested heavy metals was well explained by Langmuir and Freundlich isotherms, while pseudo-second order and Elovich kinetics models fitted well for adsorption kinetics. The maximum adsorption capacity, as predicted by the Langmuir isotherm, was the highest for BCK20 (63.19 mg g−1 for Cd, 228.05 mg g−1 for Cu, 248.33 mg g−1 for Pb, and 45.79 mg g−1 for Zn) compared to the other tested materials, and for HCK20 (31.93 mg g−1 for Cd, 181.78 mg g−1 for Cu, 231.85 mg g−1 for Pb, and 45.72 mg g−1), it was higher than pristine HC. Isotherm and kinetics modeling data indicated that multiple mechanisms were involved in Cd, Cu, Pb, and Zn removal, such as chemisorption and electrostatic interactions. The amount of oxygen-containing surface functional groups and SiO2 particles could be responsible for the maximum adsorption of heavy metals by BCK20 and HCK20. Our findings suggest that biochar, hydrochar, and their kaolinite-modified composites possess the excellent potential to remove heavy metals from contaminated aqueous media, and could be further applied to treat wastewater to mitigate heavy metal toxicity for a sustainable environment.

Effect of modified Ca-Al adsorbents on heavy metal fixation during co-combustion of coal and coconut shells: Experiments and simulations

Effect of alkaline metals (Na, Ca) on heavy metals adsorption by kaolinite during coal combustion: Experimental and DFT studies

An integrated experimental and theoretical study on Si/Al-based and Ca-based additives for immobilizing heavy metals during pyrolysis of high-organic solid waste

Kaolinite-Composited Biochar and Hydrochar as Low-Cost Adsorbents for the Removal of Cadmium, Copper, Lead, and Zinc from Aqueous Solutions

Optimal metal immobilization of oxygen-enriched co-combustion of Zn/Cd hyperaccumulator and textile dyeing sludge with natural or modified kaolin

Experimental study on enrichment of heavy metals by modified mullite during co-combustion of lignite with eucalyptus wood

Effect of CaO and montmorillonite additive on heavy metals behavior and environmental risk during sludge combustion

Effects of alkali and alkaline earth metals on co-combustion of sewage sludge and coal slime: Combustion characteristics, interactions, and kinetics

Comparative study on intercalation-exfoliation and thermal activation modified kaolin for heavy metals immobilization during high-organic solid waste pyrolysis

Synthesis of coal-analcime composite from coal gangue and its adsorption performance on heavy metal ions

Effect of Pyrolysis Temperature of Coconut Fibre Biochar Incorporated in Zn/Al Layered Double Hydroxide for the Removal of Nickel(II)

Reduction of heavy metal emissions by adding modified attapulgite to sludge in bubbling fluidized bed incineration process

The Catalytic Effect of the Na and Ca-rich Industrial Wastes on the Thermal Ignition of Coal Combustion

Heavy metals behavior of co-combustion ash from sewage sludge and coal slime: Temperature and mixing ratio dependence, interactions and speciation

Study on Combustion Characteristics and the Migration of Heavy Metals During the Co-Combustion of Oil Sludge Char and Microalgae Residue

Effects of alkali and alkaline earth metal species on the combustion characteristics and synergistic effects: Sewage sludge and its blend with coal

Biomass Inherent Metal Interfere Carbothermal Reduction Modification of Biochar for Cd Immobilization.

Thermal activated-acid/alkali modified kaolin for enhanced heavy metals capture during high-organic solid waste pyrolysis: Experimental and theoretical comparative study

Green Immobilization of Toxic Metals Using Alkaline Enhanced Rice Husk Biochar: Effects of Pyrolysis Temperature and KOH Concentration.

Biochar admixture cement mortar fines for adsorptive removal of heavy metals in single and multimetal solution: Insights into the sorption mechanisms and environmental significance

Stabilization of heavy metals in sewage sludge by co-hydrothermal carbonization with biomass bottom ash