Abstract:During the last decade, due to an increase in anthropogenic activities, a higher environmental accumulation of heavy metals has been found, which has resulted in disturbed biogeochemical balance. Many kinds of remediation techniques have been practiced to mitigate heavy metal toxicity in the aqueous phase; however, adsorption is the most commonly accepted technique for efficient heavy metal removal. In this study, conocarpus waste was pretreated with 0%, 10%, and 20% kaolinite and pyrolyzed at 600 °C for 1 h to synthesize biochars (BC, BCK10, and BCK20, respectively), while hydrothermalized at 200 °C for 6 h to synthesize hydrochars (HC, HCK10, and HCK20, respectively). After characterization, synthesized materials were employed for the removal of cadmium (Cd), copper (Cu), lead (Pb), and zinc (Zn) from contaminated water. Experimental data was further subjected to isotherm and kinetic models to estimate the adsorption mechanism. Among all the tested adsorbents, kaolinite-synthesized materials revealed comparatively higher adsorption compared to pristine materials. It was found that pH 7 was optimum for the maximum removal of tested heavy metals. Adsorption of tested heavy metals was well explained by Langmuir and Freundlich isotherms, while pseudo-second order and Elovich kinetics models fitted well for adsorption kinetics. The maximum adsorption capacity, as predicted by the Langmuir isotherm, was the highest for BCK20 (63.19 mg g−1 for Cd, 228.05 mg g−1 for Cu, 248.33 mg g−1 for Pb, and 45.79 mg g−1 for Zn) compared to the other tested materials, and for HCK20 (31.93 mg g−1 for Cd, 181.78 mg g−1 for Cu, 231.85 mg g−1 for Pb, and 45.72 mg g−1), it was higher than pristine HC. Isotherm and kinetics modeling data indicated that multiple mechanisms were involved in Cd, Cu, Pb, and Zn removal, such as chemisorption and electrostatic interactions. The amount of oxygen-containing surface functional groups and SiO2 particles could be responsible for the maximum adsorption of heavy metals by BCK20 and HCK20. Our findings suggest that biochar, hydrochar, and their kaolinite-modified composites possess the excellent potential to remove heavy metals from contaminated aqueous media, and could be further applied to treat wastewater to mitigate heavy metal toxicity for a sustainable environment.

Thermal activated-acid/alkali modified kaolin for enhanced heavy metals capture during high-organic solid waste pyrolysis: Experimental and theoretical comparative study

Comparative study on intercalation-exfoliation and thermal activation modified kaolin for heavy metals immobilization during high-organic solid waste pyrolysis

An integrated experimental and theoretical study on Si/Al-based and Ca-based additives for immobilizing heavy metals during pyrolysis of high-organic solid waste

Biochar Pyrolytically Produced from Municipal Solid Wastes for Aqueous As(V) Removal: Adsorption Property and Its Improvement with Koh Activation

Pyrolysing Wood Into Carbons For Cr(Vi) Adsorption: Performances Compared To Mineral Adsorbents

Particle Agglomeration and Inhibition Method in the Fluidized Pyrolysis Reaction of Waste Resin

First principles insights into the interaction mechanism of iron doped thermally activated kaolinite with Cd and Pb pollutants in organic solid waste incineration flue gas

Co-pyrolysis of sludge and kaolin/zeolite in a rotary kiln: Analysis of stabilizing heavy metals

Optimal metal immobilization of oxygen-enriched co-combustion of Zn/Cd hyperaccumulator and textile dyeing sludge with natural or modified kaolin

Efficient Treatment of Oily Sludge Via Fast Microwave-Assisted Pyrolysis, Followed by Thermal Plasma Vitrification.

The Influence of Multi-Step Modification Method on the Adsorption Effect of Alkali Metal Adsorbent in High Temperature Corrosive Environment

Dynamic, synergistic, and optimal emissions and kinetics of volatiles during co-pyrolysis of soil remediation plants with kaolin/modified kaolin

Application and functionalization of toxic waste sludge-derived biochar for efficient phosphate separation from aqueous media: toxicity diminution, robust adsorption, and inner mechanism

Silica aluminum xerogel-based sorbent for removal of volatilized PbCl2 during the incineration: Improvement on mass-transfer limitations via high porosity

Hydrothermal synthesized kaolin group lamellar/spongy aluminosilicates for enhanced lead vapor capture

Experimental and mechanistic study on the enrichment of heavy metals by modified calcium oxide during MSW pyrolysis

Reduction of heavy metal emissions by adding modified attapulgite to sludge in bubbling fluidized bed incineration process

Effect of Calcium-Based Sorbents on the Reduction of Chlorinated Contaminants During Municipal Solid Waste Thermal Treatment.

Migration and transformation mechanisms of Pb/Cd with HCl in organic solid waste incineration flue gas on the composite-modified kaolinite surface

Co-microwave pyrolysis of electroplating sludge and municipal sewage sludge to synergistically improve the immobilization of high-concentration heavy metals and an analysis of the mechanism

Kaolinite-Composited Biochar and Hydrochar as Low-Cost Adsorbents for the Removal of Cadmium, Copper, Lead, and Zinc from Aqueous Solutions