Abstract:The hydrodeoxygenation of furfural (FU) was investigated over Fe-containing MgO catalysts, on a continuous gas flow reactor, using methanol as a hydrogen donor. Catalysts were prepared either by coprecipitation or impregnation methods, with different Fe/Mg atomic ratios. The main product was 2-methylfuran (MFU), an important highly added value chemical, up to 92% selectivity. The catalyst design helped our understanding of the impact of acid/base properties and the nature of iron species in terms of catalytic performance. In particular, the addition of iron on the surface of the basic oxide led to (i) the increase of Lewis acid sites, (ii) the increase of the dehydrogenation capacity of the presented catalytic system, and (iii) to the significant enhancement of the FU conversion to MFU. FTIR studies, using methanol as the chosen probe molecule, indicated that, at the low temperature regime, the process follows the typical hydrogen transfer reduction, but at the high temperature regime, methanol dehydrogenation and methanol disproportionation were both presented, whereas iron oxide promoted methanol transfer. FTIR studies were performed using furfural and furfuryl alcohol as probe molecules. These studies indicated that furfuryl alcohol activation is the rate-determining step for methyl furan formation. Our experimental results clearly demonstrate that the nature of iron oxide is critical in the efficient hydrodeoxygenation of furfural to methyl furan and provides insights toward the rational design of catalysts toward C–O bonds’ hydrodeoxygenation in the production of fuel components.

Upgrading furfural to bio-fuels using supported molybdenum carbides: study of the support effect

Formic acid enabled selectivity boosting in transfer hydrogenation of 5-hydroxymethylfurfural to 2,5-furandimethanol on highly dispersed Co-N<sub><i>x</i></sub> sites

Investigating hydrodeoxygenation of furfural for 2-methylfuran production over Cu-Mo/CoOx catalyst: Influence of Mo promoter

Insights into the route of 5-hydroxymethylfurfural hydrodeoxygenation to 2,5-dimethylfuran over N-doped carbon anchored CoMo bimetallic catalyst

Subnanometric Cu clusters on atomically Fe-doped MoO2 for furfural upgrading to aviation biofuels

Characterization and performance of carbon supported platinum-bismuth bimetallic catalysts tested in 5-hydroxymethylfurfural aerobic oxidation to 2,5-furandicarboxylic acid

Electrocatalytic Upgrading Biomass Approach to Address Oxidation of 5-(Hydroxymethyl)furfural Using Mo 2 B 2 MBene Active Surface

Tandem Hydrogenation/Hydrogenolysis of Furfural to 2-Methylfuran over a Fe/Mg/O Catalyst: Structure–Activity Relationship

Nickel-tungsten carbide catalysts for the production of 2,5-dimethylfuran from biomass-derived molecules.

A Switchable Selective Catalytic Hydrogenation of Furfural over MOF-Supported Ru-Based Catalysts Based on Reaction Atmosphere Regulation

Transformation of Furfural-Acetone Condensation Adduct over Mo/SBA-15 Catalysts under Atmospheric Pressure

Nanoporous Cu–Al–Co Alloys for Selective Furfural Hydrodeoxygenation to 2-Methylfuran

Selective hydrodeoxygenation of 5-hydromethylfurfural to 2,5-dimethylfuran over PtFe/C catalyst

Aldol condensation of furfural and methyl isobutyl ketone over Zr-MOF-808/silica hybrid catalysts

A novel and highly efficient Zr-containing catalyst supported by biomass-derived sodium carboxymethyl cellulose for hydrogenation of furfural

Catalytic oxidation of biomass-derived 5-hydroxymethylfurfural to 5-hydroxymethyl-2-furancarboxylic acid by Co-based MOFs

Selective hydrodeoxygenation of 5-hydroxymethylfurfural to 2,5-dimethylfuran on Ru–MoOx/C catalysts

Aerobic oxidation of 5-[(formyloxy)methyl]furfural to 2,5-furandicarboxylic acid over MoCuOx catalyst

Pt/Nb2O5-Al2O3 Catalysts for the Hydrogenation and Reductive Amination of Furfural

2-Methylimidazole-modulated 2D Cu Metal-Organic Framework for 5-Hydroxymethylfurfural Hydrodeoxygenation

Efficient hydrogenation of furfural to fufuryl alcohol over hierarchical MOF immobilized metal catalysts