Abstract:Bio-based activated carbon supported Cu, Al, Sn and their bimetals were devised to serve as solid acid catalysts for the pyrolysis of xylan to generate furan compounds, and their catalytic activity was evaluated by Py-GC × GC/MS. The Cu–Al/C catalysts with diverse Cu to Al ratios exhibited better performance in enhancing the content and selectivity of 2-MF compared with other catalysts. Among the series of Cu–Al/C catalysts, 4Cu–2Al/C achieved a content of furan compounds as high as 80.6%, and 2-MF, FF and furan were the major furan products with selectivity values of 44.0%, 30.0% and 15.8%, respectively. Furthermore, the catalyst also worked well in promoting the pyrolysis of xylose, glucose, cellulose and pine to produce furans, and the highest and lowest contents of furans were obtained from glucose (87.8%) and pine (70.1%), respectively. These results suggest the 4Cu–2Al/C obviously promotes the formation of furans, which is comparable to those of recently reported solid acid catalysts. Characterization with XRD, XPS, NH3-TPD, N2 adsorption-desorption, and SEM, demonstrated that the effective interactions between Cu species and Al species facilitated the dehydration of saccharides and the dehydrogenation of cyclopentanones to increase furan compounds. Al species, mainly Al2O3 were the major contributor to the Lewis acid sites, and Cu specie played an essential role in regulating the acidity and enhancing the selectivity of 2-MF. In addition to furans, 4Cu–2Al/C was found to have positive effects on hindering the formation of acids in the pyrolysis products.

Characterization and performance of carbon supported platinum-bismuth bimetallic catalysts tested in 5-hydroxymethylfurfural aerobic oxidation to 2,5-furandicarboxylic acid

Liquid-Phase Aerobic Oxidation of 5-Hydroxymethylfurfural to 2,5-Furandicarboxylic Acid over Co/Mn/Br Catalyst

Kinetics and Mechanism of Catalytic Oxidation of 5-Methylfurfural to 2,5-Furandicarboxylic Acid with Co/Mn/Br Catalyst

Production of 2,5-Furandicarboxylic Acid by Optimization of Oxidation of 5-Methyl Furfural over Homogeneous Co/Mn/Br Catalysts

Atomic Layer Deposition of a Pt-Skin Catalyst for Base-Free Aerobic Oxidation of 5-Hydroxymethylfurfural to 2,5-Furandicarboxylic Acid

Cu−Ni Bimetallic Hydroxide Catalyst for Efficient Electrochemical Conversion of 5‐hydroxymethylfurfural to 2,5‐furandicarboxylic Acid

Selective Hydrogenation of Furfural to Furfuryl Alcohol Without External Hydrogen over N-doped Carbon Confined Co Catalysts

Formic Acid Enabled Selectivity Boosting in Transfer Hydrogenation of 5-Hydroxymethylfurfural to 2,5-Furandimethanol on Highly Dispersed Co–Nx Sites

Controlled deposition of Pt nanoparticles on Fe3O4@carbon microspheres for efficient oxidation of 5-hydroxymethylfurfural

5-Hydroxymethylfurfural Oxidation Over Platinum Supported on Açaí Seed Coal for Synthesis of 2,5-Furandicarboxylic Acid

Au-Based Bimetallic Catalysts for Aerobic Oxidation of 5-Hydroxymethylfurfural to 2,5-Furandicarboxylic Acid under Base-Free Reaction Conditions

Microwave‐Assisted Conversion of 5‐Hydroxymethylfurfural into 2,5‐Furandicarboxylic Acid over CuCo Oxide

Selective hydrodeoxygenation of 5-hydromethylfurfural to 2,5-dimethylfuran over PtFe/C catalyst

Selective Hydrogenation of 5-Hydroxymethylfurfural to 2,5-bis(hydroxymethyl)furan by Pt/Ni@C Catalyst

Selective Synthesis of Formyl‐2‐Furancarboxylic Acid via Enhanced Adsorption of 5‐Hydroxymethylfurfural on Composite Catalysts

Pushing the Efficiency of the Selective and Base‐free Air‐Oxidation of HMF by Varying the Properties of Carbon‐based Supports

Oxygen vacancy and support adsorption synergistic effect in aerobic oxidation of HMF to FDCA: A case study using nitrogen-doped porous carbon supported Bi-CeO2

Chemocatalytic oxidation of 5‐hydroxymethylfurfural into 2,5‐furandicarboxylic acid over nickel cobalt oxide

Bimetallic CuFe nanoparticles as active and stable catalysts for chemoselective hydrogenation of biomass-derived platform molecules

Selective conversion of lignocellulosic biomass into furan compounds using bimetal-modified bio-based activated carbon: Analytical Py-GC×GC/MS

Efficient Aerobic Oxidation of 5-Hydroxymethylfurfural to 2,5-Furandicarboxylic Acid on Ru/C Catalysts