Abstract:Summary Distributed acoustic sensing (DAS) is a relatively new technology for recording the propagation of seismic waves, with promising applications in both engineering and geophysics. DAS's ability to simultaneously collect high spatial resolution waveforms over long arrays suggests that it is well-suited for near-surface imaging applications such as 2D MASW (multichannel analysis of surface waves), which require, at a minimum, long, linear arrays of single-component receivers. The 2D MASW method uses a large number of sensor sub-arrays deployed along a linear alignment to produce 1D shear-wave velocity (VS) profiles beneath each sub-array. The 1D VS profiles are then combined to form a pseudo-2D VS image beneath the entire linear alignment that can be used for the purpose of identifying and characterizing lateral variations in subsurface layering. Traditionally, 2D MASW is conducted using arrays consisting of either 24 or 48 geophones. While additional receivers could easily be incorporated into the testing configuration, it is rare for researchers and practitioners to have access to greater numbers of seismographs and geophones. When a limited number of geophones are available for deployment, there is a need to pre-determine the geophone spacing and sub-array length prior to field data acquisition. Studies examining how the choice of sub-array geometry impacts the resulting pseudo-2D VS cross-sections have been largely limited to synthetic data. In response, this study utilizes DAS data to examine the effects of using various sub-array lengths by comparing pseudo-2D VS cross-sections derived from active-source waveforms collected at a well-characterized field site. DAS is particularly useful for 2D MASW applications because the sub-array geometry does not need to be determined prior to field data acquisition. We organize the DAS waveforms into multiple sets of overlapping MASW sub-arrays of differing lengths, ranging from 11 m to 47 m, along the same alignment, allowing for direct comparison of the derived pseudo-2D VS results at the site. We show that the length of the individual MASW sub-arrays has a significant effect on the resulting VS cross-sections, including the resolved location of a strong impedance contrasts at our study site, and evaluate the results relative to ground truth from invasive testing. Our results suggest that the choice of sub-array length is important and should be carefully chosen to meet project-specific goals. Furthermore, analysts may consider using multiple sub-array geometries during the data processing stage, as is made possible by DAS, to properly evaluate the uncertainty of 2D MASW results. This study demonstrates the potential of using DAS to collect data for 2D MASW in a manner that is efficient and flexible, and can be easily scaled up for use with very long arrays.

Multi-source wavefield reconstruction of distributed acoustic sensing data using compressive sensing and seismic interferometry

Weighted Compressive Sensing Applied to Seismic Interferometry: Wavefield Reconstruction Using Prior Information

Extracting High-Resolution, Multi-Mode Surface Wave Dispersion Data from Distributed Acoustic Sensing Measurements using the Multichannel Analysis of Surface Waves

Measurement of Surface-Wave Phase-Velocity Dispersion on Mixed Inertial Seismometer – Distributed Acoustic Sensing Seismic Noise Cross-Correlations

3D distributed and dispersed source array acquisition and data processing

Transdimensional surface wave tomography of the near-surface: Application to DAS data

Strain field reconstruction from helical-winding fiber distributed acoustic sensing and its application in anisotropic elastic reverse time migration

Retrieval and precise phase-velocity estimation of Rayleigh waves by the spatial autocorrelation method between distributed acoustic sensing and seismometer data

Reliable Earthquake Source Parameters Using Distributed Acoustic Sensing Data Derived from Coda Envelopes

Near-surface Characterization Using a Roadside Distributed Acoustic Sensing Array

Reconstruction of Nearshore Surface Gravity Wave Heights From Distributed Acoustic Sensing Data

Measuring hydrodynamics and exploring nearshore processes using distributed sensing of fiber-optic cable strain

Multi-Source Separation Under Two “Blind” Conditions for Fiber-Optic Distributed Acoustic Sensor

DAS for 2D MASW Imaging: A Case Study on the Benefits of Flexible Sub-Array Processing

Sensing Optical Fibers for Earthquake Source Characterization Using Raw DAS Records

Linking distributed and integrated fiber-optic sensing

Three-dimensional Distributed Acoustic Sensing at the Sanford Underground Research Facility

Distributed acoustic sensing for seismic surface wave data acquisition in an intertidal environment

Fast and Storage-Optimized Compressed domain vibration detection and classification for Distributed acoustic sensing

Seismic Monitoring of Rockfalls Using Distributed Acoustic Sensing

Multigrid Spatially Constrained Dispersion Curve Inversion for Distributed Acoustic Sensing (DAS)