Abstract:We investigated the physical mechanism of high-efficiency glass microwelding by double-pulse ultrafast laser irradiation by measuring the dependences of the size of the heat-affected zone and the bonding strength on the delay time between the two pulses for delay time up to 80 ns. The size of the heat-affected zone increases rapidly when the delay time is increased from 0 to 12.5 ps. It then decreases dramatically when the delay time is further increased to 30 ps. It has a small peak around 100 ps. For delay time up to 40 ns, the size of the heat-affected zone exceeds that for a delay time of 0 ps, whereas for delay time over 60 ps, it becomes smaller than that for a delay time of 0 ps. The bonding strength exhibits the same tendency. The underlying physical mechanism is discussed in terms of initial electron excitation by the first pulse and subsequent excitation by the second pulse: specifically, the first pulse induces multiphoton ionization or tunneling ionization, while the second pulse induces electron heating or avalanche ionization or the second pulse is absorbed by the localized state. Transient absorption of glass induced by the ultrafast laser pulse was analyzed by an ultrafast pump-probe technique. We found that the optimum pulse energy ratio is unity. These results provide new insights into high-efficiency ultrafast laser microwelding of glass and suggest new possibilities for further development of other ultrafast laser processing techniques.

Oblique incidence of ultrafast laser for glass butt welding

Glass Micro Welding in Thermal Accumulation Regime with Using Spatially Shaped Ultrafast Laser

Crack suppression of glass welding by ultrafast laser without optical contact based on light modulation

Welding Fused Silica Glass By Picosecond Pulsed Laser with Low Numerical Aperture

Improved Femtosecond Laser Welding of Nonoptical Contact Glass by Pressure and a Water Intermediate Layer

High-Strength Welding of Silica Glass Using Double-Pulse Femtosecond Laser under Non-Optical Contact Conditions

Welding Threshold in Ultrafast Laser Welding of Quartz Glass and 304 Stainless Steel

Realization of Joints of Aluminosilicate Glass and 6061 Aluminum Alloy via Picosecond Laser Welding without Optical Contact

Measurement of Glass Position in Ultrafast Laser Welding of Glass and Metal

Welding of Glasses in Optical and Partial-Optical Contact Via Focal Position Adjustment of Femtosecond-Laser Pulses at Moderately High Repetition Rate

The effect of gap on the quality of glass-to-glass welding using a picosecond laser

Microwelding of Glass to Silicon by Green Ultrafast Laser Pulses

High-quality welding of glass by a femtosecond laser assisted with silver nanofilm

One-step Femtosecond Laser Welding and Internal Machining of Three Glass Substrates

Characterization and mechanism of glass microwelding by double-pulse ultrafast laser irradiation

Direct Welding of Glass and Metal by 1 Khz Femtosecond Laser Pulses.

Study on Microstructure and Mechanical Properties of Femtosecond Laser Welding of Non-Optical Contact Quartz Glass and Zr-4

The connection of glass and metal with a large gap by combining laser soldering and ultrafast laser welding

Finite Element Analysis of Weld Area in Spot Bonding Process to Predict Bond Strength in Transparent Materials Using Ultrafast Lasers

A study of welding process in connecting borosilicate glass by picosecond laser pulses based on response surface methodology

Laser Soldering of Stainless Steel and Glass Assisted with Copper Coating