Abstract:Piezoelectric energy harvesting systems have been drawing the attention of the research community over recent years due to their potential for recharging/replacing batteries embedded in low-power-consuming smart electronic devices and wireless sensor networks. However, conventional linear piezoelectric energy harvesters (PEH) are often not a viable solution in such advanced practices, as they suffer from a narrow operating bandwidth, having a single resonance peak present in the frequency spectrum and very low voltage generation, which limits their ability to function as a standalone energy harvester. Generally, the most common PEH is the conventional cantilever beam harvester (CBH) attached with a piezoelectric patch and a proof mass. This study investigated a novel multimode harvester design named the arc-shaped branch beam harvester (ASBBH), which combined the concepts of the curved beam and branch beam to improve the energy-harvesting capability of PEH in ultra-low-frequency applications, in particular, human motion. The key objectives of the study were to broaden the operating bandwidth and enhance the harvester's effectiveness in terms of voltage and power generation. The ASBBH was first studied using the finite element method (FEM) to understand the operating bandwidth of the harvester. Then, the ASBBH was experimentally assessed using a mechanical shaker and real-life human motion as excitation sources. It was found that ASBBH achieved six natural frequencies within the ultra-low frequency range (<10 Hz), in comparison with only one natural frequency achieved by CBH within the same frequency range. The proposed design significantly broadened the operating bandwidth, favouring ultra-low-frequency-based human motion applications. In addition, the proposed harvester achieved an average output power of 427 μW at its first resonance frequency under 0.5 g acceleration. The overall results of the study demonstrated that the ASBBH design can achieve a broader operating bandwidth and significantly higher effectiveness, in comparison with CBH.

Piezoelectric Hinged Beam with Arc Mass Stopper for Vibration and Human Motion Energy Harvesting

Uniform Stress Distribution of Bimorph by Arc Mechanical Stopper for Maximum Piezoelectric Vibration Energy Harvesting

Modeling and design of V-shaped piezoelectric vibration energy harvester with stopper for low-frequency broadband and shock excitation

Hybrid magnetic coupling and impact enhanced low, adjustable and broadband piezoelectric vibration energy harvesting

Piezoelectric Vibration Energy Harvester with High Power Density by Structure and Process Optimization

A Packaged Piezoelectric Vibration Energy Harvester with High Power and Broadband Characteristics

A novel two-degree-of-freedom nonlinear piezoelectric energy harvester with a stopper for broadband low-frequency vibration

Comparison of L-Shaped and U-Shaped Beams in Bidirectional Piezoelectric Vibration Energy Harvesting.

A piezoelectric human motion energy harvester with stress amplification mechanism

Low-frequency piezoelectric energy harvesting from coupled longitudinal-transverse vibration of two magnetic coupling-based orthogonal beams

A piezoelectric energy harvester using an arc-shaped piezoelectric cantilever beam array

Enhanced performance on piezoelectric MEMS vibration energy harvester by dynamic magnifier under impulsive force

Frequency Modulation Approach for High Power Density 100 Hz Piezoelectric Vibration Energy Harvester

Theoretical modeling and experimental verification of a broadband microvibrational energy harvesting system

Design of a Piezoelectric–electromagnetic Hybrid Vibration Energy Harvester Operating under Ultra-Low Frequency Excitation

An enhanced broadband piezoelectric energy harvester via elastic amplification structure for multidirectional vibration

A novel soft encapsulated multi-directional and multi-modal piezoelectric vibration energy harvester

An H-shaped Two-Dimensional Piezoelectric Vibration Energy Harvester

A Multi-Mode Broadband Vibration Energy Harvester Composed of Symmetrically Distributed U-Shaped Cantilever Beams

Linear Segmented Arc-Shaped Piezoelectric Branch Beam Energy Harvester for Ultra-Low Frequency Vibrations

A distributed-parameter electromechanical coupling model for a segmented arc-shaped piezoelectric energy harvester