Abstract:Aliovalent dopant codoped rutile–TiO 2 materials have garnered attention due to their excellent performance properties, characterized by low loss tangent (tanδ), high dielectric permittivity (ε′), and stable ε′ over a broad temperature range. This performance is primarily due to the electron−pinned defect−dipoles (EPDDs) of the complex defects Ti 3+ – Ti 3+ B Ti . Notably, the excellent dielectric properties in Zr x Ta 2.5% Ti 0.975− x O 2 (Zr–TTO) ceramics can be achieved using the traditional mixed oxide method without the EPDDs, due to the absence of A 3+ (acceptor doping ions). Instead, the existence of localized free electrons and oxygen vacancies ( ) in Zr–TTO structures, due to doping ions and the sintering process, was confirmed by X–ray photoelectron and Raman spectroscopies. These ceramics exhibited ε′~ 2 × 10 4 and tanδ < 0.03 at 1 kHz and 25 °C in the 2.5–10%Zr–TTO samples. Moreover, all ceramics demonstrated a maximum ε′ change (∆ε′) of less than ±15% over the temperature range suitable for X7R and X8R type ceramic capacitors. Significantly, the change in ε′ related to relative humility was calculated to be less than ±0.5% over the range of 50–95% RH, indicating the environmental stability of the dielectric properties, which is essential for capacitor applications. Investigations suggested that at least four mechanisms contributed to this system: the intrinsic effect of ionic polarization, Ti 4+ · e – – – Ti 4+ · e – and Ti 4+ · e – – defects, interfacial polarization at insulating grain boundaries, and non–Ohmic contact between the surface sample and the metal electrode.

Enhanced humidity sensing properties of Ta2O5 and ITO doped rutile-TiO2 porous ceramics

Microstructure, Colossal Permittivity, and Humidity Sensitivity of (na, Nb) Co-Doped Rutile TiO2 Ceramics

Humidity Sensing Behavior and Its Influence on the Dielectric Properties of (in + Nb) Co-Doped TiO2 Ceramics

Structure and Humidity-sensitive Properties of TiO2-doped α-Fe2O3-K2O Nanometer-sized Ceramics

Structure and humidity-sensitive properties of TiO2-doped alpha-Fe2O3-K2O nanometer-sized ceramics

Giant and Controllable Humidity Sensitivity Achieved in (na+nb) Co-Doped Rutile TiO2

Characterization of an Impedance-Type Humidity Sensor Based on Porous SnO2/TiO2 Composite Ceramics Modified with Molybdenum and Zinc

Giant Permittivity and Humidity Sensitivity of SrTiO 3 Based Ceramics Induced by K,Nb Donor-Acceptor Co-Doping

Tuning of Electrical and Optical Properties of Tantalum Doped TiO2 Flims Prepared by Sol-gel Method

Comprehensive Properties and Thermal Stability of Ta2O5-doped PIN-PHT Ceramics

Emulsion-Templated Fully Three-Dimensional Interconnected Porous Titania Ceramics with Excellent Humidity Sensing Properties

Mechanisms of enhanced performance in Zr4+/Ta5+ codoped rutile–TiO2 ceramics via broadband dielectric spectroscopy

Preparation and performance of NaTaO3/TiO2 humidity sensors with high responsivity

Characterization and humidity sensing properties of the sensor based on Na2Ti3O7 nanotubes

The effect of thickness on the performance of (K 1/4 Ta 3/4 ) x Sn 1 -x O 2 -based humidity sensor

Complex Impedance and Electrical Conduction Analysis of Ho2O3 Doped CaCu3Ti4O12 NTC Ceramics

Formation of a Nanorod-Assembled TiO2 Actinomorphic-Flower-like Microsphere Film via Ta Doping Using a Facile Solution Immersion Method for Humidity Sensing

The effect of thickness on the performance of (K1/4Ta3/4)xSn1-xO2-based humidity sensor

Enhanced optical, dielectric, and non-Ohmic properties in Ta-doped Bi2/3Cu3Ti4O12 ceramics

Tuning enhanced dielectric properties of (Sc3+–Ta5+) substituted TiO2 via insulating surface layers

Sol–gel processed TiO2–K2O–LiZnVO4 ceramic thin films as innovative humidity sensors