QM-polarized ligand docking accurately predicts the trend in binding affinity of a series of arylmethylene quinuclidine-like derivatives at the α4β2 and α3β4 nicotinic acetylcholine receptors (nAChRs).

D. Kombo,V. Grinevich,T. Hauser,Serguei S. Sidach,M. Bencherif

DOI: https://doi.org/10.1016/j.bmcl.2013.06.094

IF: 2.94

2013-09-01

Bioorganic & Medicinal Chemistry Letters

Abstract:

What problem does this paper attempt to address?

Electrostatic layer-by-layer nano-assembly: films, cantilevers, micropatterns, and nanocapsules

dinesh s kommireddy,jingshi shi,xiaodong yan,haifeng ji,yuri m lvov

DOI: https://doi.org/10.1117/12.568046

2005-01-01

Abstract:Layer-by-layer (LbL) nanoassembly in combination with traditional lithography and microfluidics was applied for the fabrication of ultrathin microcantilevers and for the modification of microchannel surface. Hundreds of cantilevers were fabricated on a silicon wafer simultaneously. The purpose is to develop chemical/biosensor arrays for parallel, massive data gathering. Microcantilever optical deflections were measured using a four-quadrant AFM head with integrated laser and position sensitive detector. In the second part, laminar flow fabrication of interpolyelectrolyte complexes was studied inside a microchannel. Polyelectrolyte micropatterns were studied using fluorescent confocal microscopy. Filament like, 15 mu m, interpolyelectrolyte microstripes were formed at flow rate higher than 0.01 mL(.)min(-1) and concentrations of the initial polyelectrolytes below 1 mg(.)mL(-1). New, soft micropatterning technique for the anisotropic modification of polyelectrolyte nanocapsules was also demonstrated. The microchannel surface was made sensitive to pH by coating the surface of the channel with a pH sensitive dye using LbL assembly to control the reaction.
A versatile method for functionalizing surfaces with bioactive glycans.

Fang Cheng,Jing Shang,Daniel M Ratner

DOI: https://doi.org/10.1021/bc1003372

IF: 4.7

2010-01-01

Bioconjugate Chemistry

Abstract:Microarrays and biosensors owe their functionality to our ability to display surface-bound biomolecules with retained biological function. Versatile, stable, and facile methods for the immobilization of bioactive compounds on surfaces have expanded the application of high-throughput "omics"-scale screening of molecular interactions by nonexpert laboratories. Herein, we demonstrate the potential of simplified chemistries to fabricate a glycan microarray, utilizing divinyl sulfone (DVS)-modified surfaces for the covalent immobilization of natural and chemically derived carbohydrates, as well as glycoproteins. The bioactivity of the captured glycans was quantitatively examined by surface plasmon resonance imaging (SPRi). Composition and spectroscopic evidence of carbohydrate species on the DVS-modified surface were obtained by X-ray photoelectron spectroscopy (XPS) and time-of-flight secondary ion mass spectrometry (ToF-SIMS), respectively. The site-selective immobilization of glycans based on relative nucleophilicity (reducing sugar vs amine- and sulfhydryl-derived saccharides) and anomeric configuration was also examined. Our results demonstrate straightforward and reproducible conjugation of a variety of functional biomolecules onto a vinyl sulfone-modified biosensor surface. The simplicity of this method will have a significant impact on glycomics research, as it expands the ability of nonsynthetic laboratories to rapidly construct functional glycan microarrays and quantitative biosensors.
Glyco-Platelets with Controlled Morphologies Via Crystallization-Driven Self-Assembly and Their Shape-Dependent Interplay with Macrophages.

Zhen Li,Yufei Zhang,Libin Wu,Wei Yu,Thomas R. Wilks,Andrew P. Dove,Hong-ming Ding,Rachel K. O'Reilly,Guosong Chen,Ming Jiang

DOI: https://doi.org/10.1021/acsmacrolett.9b00221

IF: 5.8

2019-01-01

ACS Macro Letters

Abstract:Two-dimensional (2D) materials are of great significance to the materials community as a result of their high surface area and controllable surface properties. However, controlled preparation of biodegradable 2D structures with biological activity is difficult. In this work we demonstrate that by careful selection of building block structures and assembly conditions it is possible to use crystallization-driven self-assembly (CDSA) to assemble well-defined 2D nanostructures from poly(L-lactide) (PLLA)-based diblock glycopolymers. 1D glyco-cylinders and 2D diamond-shaped glyco-platelets are produced, where the underlying formation mechanism is revealed by dissipative particle dynamics simulations. Furthermore, we demonstrate that assembly of the polymers under mild degradation provides a straightforward route to hollow-cored platelets, a morphology that has previously proven laborious to access. The well-defined sizes and shapes of the glyco-platelets allow us to investigate macrophage activation efficiency and demonstrate clear size and shape effects, pointing toward potential applications in immunology.
Preface - SI: SIAM-2015

Xiaoming He,Jiangguo Liu,E. Vleck

DOI: https://doi.org/10.1016/j.cam.2016.04.035

IF: 2.872

2016-12-01

Journal of Computational and Applied Mathematics

Abstract:
Nanoscale Surface Chemical Patterning of Soft Polyacrylamide with Elastic Modulus Similar to Soft Tissue

Teah N. Tirey,Anamika Singh,Juan C. Arango,Shelley A. Claridge

DOI: https://doi.org/10.1021/acs.chemmater.4c01106

IF: 10.508

2024-09-16

Chemistry of Materials

Abstract:Nanometer-scale control over surface functionalization of soft gels is important for a variety of applications including controlling interactions with cells for in vitro cell culture and for regenerative medicine. Recently, we have shown that it is possible to transfer a nanometer-thick precision functional polymer layer to the surface of relatively stiff polyacrylamide gels. Here, we develop a fundamental understanding of the way in which the precision polymer backbone participates in the...

materials science, multidisciplinary,chemistry, physical
Multiple functionalities of polyelectrolyte multilayer films: new biomedical applications.

Thomas Boudou,Thomas Crouzier,Kefeng Ren,Guillaume Blin,Catherine Picart

DOI: https://doi.org/10.1002/adma.200901327

IF: 29.4

2010-01-01

Advanced Materials

Abstract:The design of advanced functional materials with nanometer- and micrometer-scale control over their properties is of considerable interest for both fundamental and applied studies because of the many potential applications for these materials in the fields of biomedical materials, tissue engineering, and regenerative medicine. The layer-by-layer deposition technique introduced in the early 1990s by Decher, Moehwald, and Lvov is a versatile technique, which has attracted an increasing number of researchers in recent years due to its wide range of advantages for biomedical applications: ease of preparation under "mild" conditions compatible with physiological media, capability of incorporating bioactive molecules, extra cellular matrix components and biopolymers in the films, tunable mechanical properties, and spatio-temporal control over film organization. The last few years have seen a significant increase in reports exploring the possibilities offered by diffusing molecules into films to control their internal structures or design "reservoirs", as well as control their mechanical properties. Such properties, associated with the chemical properties of films, are particularly important for designing biomedical devices that contain bioactive molecules. In this review, we highlight recent work on designing and controlling film properties at the nanometer and micrometer scales with a view to developing new biomaterial coatings, tissue engineered constructs that could mimic in vivo cellular microenvironments, and stem cell "niches".
Creating "living" Polymer Surfaces to Pattern Biomolecules and Cells on Common Plastics.

Chunyan Li,Andrew Glidle,Xiaofei Yuan,Zhixiong Hu,Ellie Pulleine,Jon Cooper,Wantai Yang,Huabing Yin

DOI: https://doi.org/10.1021/bm4000597

2013-01-01

Biomacromolecules

Abstract:Creating patterns of biomolecules and cells has been applied widely in many fields associated with the life sciences, including diagnostics. In these applications it has become increasingly apparent that the spatiotemporal arrangement of biological molecules in vitro is important for the investigation of the cellular functions found in vivo. However, the cell patterning techniques often used are limited to creating 2D functional surfaces on glass and silicon. In addition, in general, these procedures are not easy to implement in conventional biological laboratories. Here, we show the formation of a living poly(ethylene glycol) (PEG) layer that can be patterned with visible light on plastic surfaces. This new and simple method can be expanded to pattern multiple types of biomolecule on either a previously formed PEG layer or a plastic substrate. Using common plastic wares (i.e., polyethylene films and polystyrene cell culture Petri-dishes), we demonstrate that these PEG-modified surfaces have a high resistance to protein adsorption and cell adhesion, while at the same time, being capable of undergoing further molecular grafting with bioactive motifs. With a photomask and a fluid delivery system, we illustrate a flexible way to immobilize biological functions with a high degree of 2D and 3D spatial control. We anticipate that our method can be easily implemented in a typical life science laboratory (without the need for specialized lithography equipment) offering the prospect of imparting desirable properties to plastic products, for example, the creation of functional microenvironments in biological studies or reducing biological adhesion to surfaces.
Catechol chemistry inspired approach to construct self-cross-linked polymer nanolayers as versatile biointerfaces

Xinyue Liu,Jie Deng,Lang Ma,Chong Cheng,Chuanxiong Nie,Chao He,Changsheng Zhao

DOI: https://doi.org/10.1021/la503872h

IF: 3.9

2014-12-16

Langmuir

Abstract:In this study, we proposed a catechol chemistry inspired approach to construct surface self-cross-linked polymer nanolayers for the design of versatile biointerfaces. Several representative biofunctional polymers, P(SS-co-AA), P(SBMA-co-AA), P(EGMA-co-AA), P(VP-co-AA), and P(MTAC-co-AA), were first synthesized via reversible addition-fragmentation chain transfer (RAFT) polymerization, and then the catecholic molecules (dopamine, DA) were conjugated to the acrylic acid (AA) units by the facile carbodiimide chemistry. Then, the catechol (Cat) group conjugated biofunctional polymers, named PSS-Cat, PSBMA-Cat, PEGMA-Cat, PVP-Cat, and PMTAC-Cat, were applied for the construction of self-cross-linked nanolayers on polymeric substrates via the pH induced catechol cross-linking and immobilization. The XPS spectra, surface morphology, and wettability gave robust evidence that the catechol conjugated polymers were successfully coated, and the coated substrates possessed increased surface roughness and hydrophilicity. Furthermore, the systematic in vitro investigation of protein adsorption, platelet adhesion, activated partial thromboplastin time (APTT), thrombin time (TT), cell viability, and antibacterial ability confirmed that the coated nanolayers conferred the substrates with versatile biological performances. The PSS-Cat coated substrate had low blood component activation and excellent anticoagulant activity; while the PEGMA-Cat and PSBMA-Cat showed ideal resistance to protein fouling and inhibition of platelet activation. The PSS-Cat and PVP-Cat coated substrates exhibited promoted endothelial cell proliferation and viability. The PMTAC-Cat coated substrate showed an outstanding activity on bacterial inhibition. In conclusion, the catechol chemistry inspired approach allows the self-cross-linked nanolayers to be easily immobilized on polymeric substrates with the stable conformation and multiple biofunctionalities. It is expected that this low-cost and facile bioinspired coating system will present great potential in creating novel and versatile biointerfaces.
A low-fouling, self-assembled, graft co-polymer and covalent surface coating for controlled immobilization of biologically active moieties

Anne-Sophie Mertgen,Anne Géraldine Guex,Samuele Tosatti,Giuseppino Fortunato,René M. Rossi,Markus Rottmar,Katharina Maniura-Weber,Stefan Zürcher

DOI: https://doi.org/10.1016/j.apsusc.2022.152525

IF: 6.7

2022-05-01

Applied Surface Science

Abstract:Current biointerfaces aiming to steer specific biological responses frequently lack either stability due to purely electrostatic interactions, bioactivity due to unspecific conjugation chemistries, specificity due to uncontrolled biological interactions such as fouling, or cytocompatibility due to harsh and toxic coating procedures. Here, we report a versatile surface modification platform for covalent tethering of selected biomolecules. New in this approach is the particular combination of modular binding blocks as graft co-polymer. Grafted to the backbone of PAcrAmTM multiple functionalities are strategically combined: covalent (silane) and non-covalent (lysine) surface binding groups for stability and self-assembly in mild buffered solution, PEG-azide chains for low fouling properties, and specific, controlled, covalent, linking of biologically active molecules. This modular strategy overcomes the previously mentioned limitations, for instance regarding bioactivity of the biological moiety due to highly specific strain-promoted azide-alkyne cycloaddition. The successful grafting of the copolymer was confirmed by 1H NMR. The immobilization of RGD peptides was characterized by combining surface analytical techniques, such as ToF-SIMS and ellipsometry, allowing quantification of immobilized molecules over an extensive range of concentrations (0.008–1.95 pmol·cm−2). The bioactivity over this range of concentrations was confirmed by in vitro cell studies, presenting a differential endothelial cell attachment and spreading. The modified substrates enabled the formation of an interconnected monolayer of endothelial cells. Furthermore, the modular platform allowed the co-immobilization of two bioactive functional groups, RGD and biotin, on the same surface, which could be exploited for the further development of controlled multi-functional biointerfaces for diverse biological applications in the future.

chemistry, physical,physics, applied, condensed matter,materials science, coatings & films
High‐Resolution Patterned Functionalization of Slippery “Liquid‐Like” Brush Surfaces via Microdroplet‐Confined Growth of Multifunctional Polydopamine Arrays

Lvye Fang,Jinghua Zhang,Yuxin Chen,Shilin Liu,Qiyuan Chen,Ao Ke,Liting Duan,Shilin Huang,Xuelin Tian,Zhuang Xie

DOI: https://doi.org/10.1002/adfm.202100447

IF: 19

2021-03-03

Advanced Functional Materials

Abstract:Abstract Slippery omniphobic covalently attached liquids enable smooth, transparent, pressure‐ and temperature‐resistant, and liquid‐repellent coatings. Patterned functionalization of such surfaces would drive technology developments and fundamental understandings in broad applications from biosensors to sustainable smart surfaces. Herein an additive microcontact printing approach in combination with the microdroplet‐confined synthesis is developed to functionalize slippery surfaces tethered with “liquid‐like” linear poly(dimethylsiloxane) by multifunctional polydopamine (PDA) arrays. Using glycerol and non‐ionic surfactant Tween‐20, microdroplet arrays containing dopamine monomers are printed onto the slippery surfaces and serve as microreactors for the in situ growth of PDA micropatterns. The confined growth approach enables tunable feature size, height, and morphology of the patterns, through which sub‐micrometer PDA dot arrays over centimeter‐square patterning area can be reliably achieved. Furthermore, the reactive and hydrophilic PDA micropatches allow further functionalization of the slippery surfaces with a diverse variety of materials, meanwhile the anti‐fouling and dynamically dewetting “liquid‐like” brushes permit minimum background contamination. Proof‐of‐concept demonstrations include PDA‐initiated photografting for stimuli‐responsive polymer functionalization, protein immobilization for microarray‐based immunoassays, as well as sliding‐induced selective dewetting of organic solutions to pattern photoluminescent perovskite microcrystals and nanoparticles. The current approach illustrates the potential for applying patterned slippery surfaces with multifunctional architectures in many fields.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Preparation of Stable Micropatterns of Gold on Cell-Adhesion-resistant Hydrogels Assisted by a Hetero-Bifunctional Macromonomer Linker

JianGuo Sun,Stefan V. Graeter,Jian Tang,JingHuan Huang,Peng Liu,YuXiao Lai,Lin Yu,Günter Majer,Joachim P. Spatz,JianDong Ding

DOI: https://doi.org/10.1007/s11426-013-5057-8

2014-01-01

Science China Chemistry

Abstract:Surface patterning is very useful in biomaterial studies, yet it is not easy to prepare a micropattern with cell-adhesion contrast that is stable in a wet environment. Recently, a platform technique of transfer photolithography was invented to fabricate stable metal microarrays on the surface of a cell-adhesion resistant and mechanically biomimetic poly(ethylene glycol) hydrogel; the linker is the key chemical in such a transfer strategy. This article reports the design and synthesis of a hetero-bifunctional macromonomer linker with a thiol group at one end and an acryloyl group at the other end. The bifunctional linker was characterized by GPC and 1H NMR, and the average number of thiol groups in the bifunctional linker was detected by Ellman’s reagent. The regent stability under wet conditions was also confirmed by the model reactants. The resultant micropatterned surfaces are meaningful for future studies of cell behaviors on mechanically biomimetic matrixes.
Interaction of Epithelial Cells with Surfaces and Surfaces Decorated by Molecules

Daniele Martini,Othmar Marti,Michael Beil,T. Paust,C. Huang,M. Moosmann,J. Jin,T. Heiler,R. Gröger,Thomas Schimmel,Stefan Walheim

DOI: https://doi.org/10.48550/arXiv.1303.0392

2013-03-02

Abstract:A detailed understanding of the interface between living cells and substrate materials is of rising importance in many fields of medicine, biology and biotechnology. Cells at interfaces often form epithelia. The physical barrier that they form is one of their main functions. It is governed by the properties of the networks forming the cytoskeleton systems and by cell-to-cell contacts. Different substrates with varying surface properties modify the migration velocity of the cells. On the one hand one can change the materials composition. Organic and inorganic materials induce differing migration velocities in the same cell system. Within the same class of materials, a change of the surface stiffness or of the surface energy modifies the migration velocity, too. For our cell adhesion studies a variety of different, homogeneous substrates were used (polymers, bio-polymers, metals, oxides). In addition, an effective lithographic method, Polymer Blend Lithography (PBL), is reported, to produce patterned Self-Assembled Monolayers (SAM) on solid substrates featuring two or three different chemical functionalities. This we achieve without the use of conventional lithography like e-beam or UV lithography, only by using self-organization. These surfaces are decorated with a Teflon-like and with an amino-functionalized molecular layer. The resulting pattern is a copy of a previously created self-organized polymer pattern, featuring a scalable lateral domain size in the sub-micron range down below 100 nanometers. The resulting monolayer pattern features a high chemical and biofunctional contrast with feature sizes in the range of cell adhesion complexes like e.g. focal adhesion points.

Biological Physics,Soft Condensed Matter
Evaluation of trace element availability from secondary metallurgical slag generated in steelmaking by sequential chemical extraction

M. Mäkelä,I. Välimäki,R. Pöykiö,H. Nurmesniemi,O. Dahl

DOI: https://doi.org/10.1007/s13762-012-0160-5

2013-02-26

International Journal of Environmental Science and Technology

Abstract:
Designing mamdani type fuzzy rule using a collaborative FCM scheme

Chin-Teng Lin,M. Prasad,Jyh-Yeong Chang

DOI: https://doi.org/10.1109/IFUZZY.2013.6825450

2013-12-01

Abstract:This paper presents a new approach for generating fuzzy rules for fuzzy inference system by using collaborative fuzzy c-mean (CFCM). In order to do any mode of integration between datasets, there is a need to define the common feature between datasets by using some kind of collaborative process and also need to preserve the privacy and security at higher levels. This collaboration process gives a common structure between datasets which helps to define an appropriate number of rules for structural learning and also improve the accuracy of the system modeling. This all consideration bring the concept of collaborative fuzzy rule generation process with a quality measuring.
Mimicking Cellular Environments by Nanostructured Soft Interfaces

Stefan V. Graeter,Jinghuan Huang,Nadine Perschmann,Monica Lopez-Garcia,Horst Kessler,Jiandong Ding,Joachim P. Spatz

DOI: https://doi.org/10.1021/nl070098g

IF: 10.8

2007-01-01

Nano Letters

Abstract:We present herein an innovative technique for decorating soft polymer surfaces with metallic nanostructures fabricated by diblock copolymer micelle nanolithography. Thus far, such nanolithography has been limited to plasma-resistant inorganic substrates such as glass. Our new development is based on the transfer of nanopatterns from glass to soft substrates. Special emphasis is given to hydrogel surfaces with respect to their properties for tailoring cell adhesion. Besides planar surfaces, periodic gold nanopatterns on curved surfaces have been fabricated, as demonstrated on the interior surface of a tubelike hydrogel, which potentially mimic situations of vessels in vivo.
Enabling Tunable Water‐Responsive Surface Adaptation of PDMS via Metal–Ligand Coordinated Dynamic Networks

Xinyue Zhang,Ralph Crisci,John A. Finlay,Hongyi Cai,Anthony S. Clare,Zhan Chen,Meredith N. Silberstein

DOI: https://doi.org/10.1002/admi.202200430

IF: 5.4

2022-04-07

Advanced Materials Interfaces

Abstract:A new design is demonstrated to enable time‐dependent adaptation of a polymer via dynamic functionalities. By embedding metal–ligand coordination into a PDMS matrix, a reversible hydrophobic to hydrophilic evolution with tunable extent and speed is realized on the surface when exposed to polar liquids.Polymers are at the core of emerging flexible sensor and soft actuator technology. Ideal candidates not only respond to external stimuli but also have programmable response intensity and speed. Incorporating dynamic interactions into polymers has been widely studied. However, most research has focused on synthesis methods and on optical and mechanical effects of these interactions. Here, a new and tunable method of enabling environmentally adaptive polymers are introduced. Specifically, polar functionalities are "hidden" within polydimethylsiloxane (PDMS). When unveiled, these polar functionalities change the hydrophilicity of the polymer. Water is the stimulus that triggers the exposure of polar functionalities by disrupting interfacial equilibrium and driving surface reconstruction. This reversible adaptation is governed by the dynamics of a metal–ligand coordinated polymer, and therefore can be easily tailored by the choice of network structure, metal cations, and counter anions. PDMS is a particularly exciting polymer for this functionality because of the negative consequences of its intrinsically high hydrophobicity in many applications. However, this design concept is applicable to a wide range of polymers and can be expanded to other dynamic interactions such as reversible covalent bonding, hydrogen bonding, and ionic bonding, to empower programmable responsive functionality and therefore enhance material performance.

materials science, multidisciplinary,chemistry
Urinary diversion to the augmented and valved rectum: preliminary results with a novel surgical procedure.

Nils G. Kock,Mohamed A. Ghoneim,K. Lycke,Mohamed R. Mahran

DOI: https://doi.org/10.1016/S0022-5347(17)42049-0

1988-12-01

Abstract:
Ultrasmooth Polydopamine Modified Surfaces for Block Copolymer Nanopatterning on Flexible Substrates

Joon Hee Cho,Reika Katsumata,Sunshine X. Zhou,Chae Bin Kim,Austin R. Dulaney,Dustin W. Janes,Christopher J. Ellison

DOI: https://doi.org/10.1021/acsami.6b00626

2016-03-11

Abstract:Nature has engineered universal, catechol-containing adhesives which can be synthetically mimicked in the form of polydopamine (PDA). In this study, PDA was exploited to enable the formation of block copolymer (BCP) nanopatterns on a variety of soft material surfaces. While conventional PDA coating times (1 h) produce a layer too rough for most applications of BCP nanopatterning, we found that these substrates could be polished by bath sonication in a weakly basic solution to form a conformal, smooth (root-mean-square roughness ∼0.4 nm), and thin (3 nm) layer free of large prominent granules. This chemically functionalized, biomimetic layer served as a reactive platform for subsequently grafting a surface neutral layer of poly(styrene-random-methyl methacrylate-random-glycidyl methacrylate) to perpendicularly orient lamellae-forming poly(styrene-block-methyl methacrylate) BCP. Moreover, scanning electron microscopy observations confirmed that a BCP nanopattern on a poly(ethylene terephthalate) substrate was not affected by bending with a radius of ∼0.5 cm. This procedure enables nondestructive, plasma-free surface modification of chemically inert, low-surface energy soft materials, thus overcoming many current chemical and physical limitations that may impede high-throughput, roll-to-roll nanomanufacturing.

materials science, multidisciplinary,nanoscience & nanotechnology
Engineering Surface Patterns with Shape Memory Polymers: Multiple Design Dimensions for Diverse and Hierarchical Structures

Lingyu Zhao,Liangpei Zhang,Jun Zhao,Jidong Shi,Zhaohe Dai,Guorui Wang,Cheng Zhang,Bo Li,Xiqiao Feng,Hui Zhang,Jin Zhang,Zhong Zhang

DOI: https://doi.org/10.1021/acsami.8b15535

IF: 9.5

2019-01-01

ACS Applied Materials & Interfaces

Abstract:Deterministic design of surface patterns has seen a surge of interests because of their wide applications in flexible and stretchable electronics, microfluidics, and optical devices. Recently, instability of bilayer systems has been extensively utilized by which micro-/nano-patterns of a film can be easily achieved through macroscopically deforming the underlying substrate. For a bilayer system with traditional thermostable substrates, the pattern morphology is only determined by initial strain mismatch of the two layers, and the realization of localized patterns appears to be particularly challenging because of the difficulties associated with manipulating inhomogeneous deformations. In this work, we exploit cross-linked polyethylene (cPE), a shape memory polymer (SMP), as the flexible substrate for building micro-/nano-structures of sputtered gold films. We find that the shape memory effect can offer new dimensions for designing diverse and hierarchical surface structures by harnessing film thickness orheating time and by globally or locally controlling the thermal field. By combining those strategies, we further demonstrate versatile hierarchical, superimposed, and local surface patterns based on this cPE/gold (Au) system. Piezoresistive pressure sensors are assembled with the obtained patterned surface, which have high sensitivity, operational range, and cyclic stability. These results highlight the unique advantages of SMPs for building arbitrary surface patterns.
Polymer blend lithography: A versatile method to fabricate nanopatterned self-assembled monolayers

Cheng Huang,Markus Moosmann,Jiehong Jin,Tobias Heiler,Stefan Walheim,Thomas Schimmel

DOI: https://doi.org/10.3762/bjnano.3.71

IF: 3.1

2012-09-04

Beilstein Journal of Nanotechnology

Abstract:A rapid and cost-effective lithographic method, polymer blend lithography (PBL), is reported to produce patterned self-assembled monolayers (SAM) on solid substrates featuring two or three different chemical functionalities. For the pattern generation we use the phase separation of two immiscible polymers in a blend solution during a spin-coating process. By controlling the spin-coating parameters and conditions, including the ambient atmosphere (humidity), the molar mass of the polystyrene (PS) and poly(methyl methacrylate) (PMMA), and the mass ratio between the two polymers in the blend solution, the formation of a purely lateral morphology (PS islands standing on the substrate while isolated in the PMMA matrix) can be reproducibly induced. Either of the formed phases (PS or PMMA) can be selectively dissolved afterwards, and the remaining phase can be used as a lift-off mask for the formation of a nanopatterned functional silane monolayer. This “monolayer copy” of the polymer phase morphology has a topographic contrast of about 1.3 nm. A demonstration of tuning of the PS island diameter is given by changing the molar mass of PS. Moreover, polymer blend lithography can provide the possibility of fabricating a surface with three different chemical components: This is demonstrated by inducing breath figures (evaporated condensed entity) at higher humidity during the spin-coating process. Here we demonstrate the formation of a lateral pattern consisting of regions covered with 1 H ,1 H ,2 H ,2 H -perfluorodecyltrichlorosilane (FDTS) and (3-aminopropyl)triethoxysilane (APTES), and at the same time featuring regions of bare SiO x . The patterning process could be applied even on meter-sized substrates with various functional SAM molecules, making this process suitable for the rapid preparation of quasi two-dimensional nanopatterned functional substrates, e.g., for the template-controlled growth of ZnO nanostructures Bauermann, L. P.; Gerstel, P.; Bill, J.; Walheim, S.; Huang, C.; Pfeifer, J.; Schimmel, T. Langmuir 2010, 26, 3774–3778. doi:10.1021/la903636k.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology

QM-polarized ligand docking accurately predicts the trend in binding affinity of a series of arylmethylene quinuclidine-like derivatives at the α4β2 and α3β4 nicotinic acetylcholine receptors (nAChRs).

Electrostatic layer-by-layer nano-assembly: films, cantilevers, micropatterns, and nanocapsules

A versatile method for functionalizing surfaces with bioactive glycans.

Glyco-Platelets with Controlled Morphologies Via Crystallization-Driven Self-Assembly and Their Shape-Dependent Interplay with Macrophages.

Preface - SI: SIAM-2015

Nanoscale Surface Chemical Patterning of Soft Polyacrylamide with Elastic Modulus Similar to Soft Tissue

Multiple functionalities of polyelectrolyte multilayer films: new biomedical applications.

Creating "living" Polymer Surfaces to Pattern Biomolecules and Cells on Common Plastics.

Catechol chemistry inspired approach to construct self-cross-linked polymer nanolayers as versatile biointerfaces

A low-fouling, self-assembled, graft co-polymer and covalent surface coating for controlled immobilization of biologically active moieties

High‐Resolution Patterned Functionalization of Slippery “Liquid‐Like” Brush Surfaces via Microdroplet‐Confined Growth of Multifunctional Polydopamine Arrays

Preparation of Stable Micropatterns of Gold on Cell-Adhesion-resistant Hydrogels Assisted by a Hetero-Bifunctional Macromonomer Linker

Interaction of Epithelial Cells with Surfaces and Surfaces Decorated by Molecules

Evaluation of trace element availability from secondary metallurgical slag generated in steelmaking by sequential chemical extraction

Designing mamdani type fuzzy rule using a collaborative FCM scheme

Mimicking Cellular Environments by Nanostructured Soft Interfaces

Enabling Tunable Water‐Responsive Surface Adaptation of PDMS via Metal–Ligand Coordinated Dynamic Networks

Urinary diversion to the augmented and valved rectum: preliminary results with a novel surgical procedure.

Ultrasmooth Polydopamine Modified Surfaces for Block Copolymer Nanopatterning on Flexible Substrates

Engineering Surface Patterns with Shape Memory Polymers: Multiple Design Dimensions for Diverse and Hierarchical Structures

Polymer blend lithography: A versatile method to fabricate nanopatterned self-assembled monolayers