Abstract:The key challenge in photovoltaic solar applications has been the limitation of power conversion efficiency (PCE) as it is dictated by the intrinsic processes in a semiconductor. In particular, the temperature dependence of PCE needs to be addressed upon long‐term solar irradiation. In this study, we develop an alternative strategy by modulating the solar light spectrum with a series of photonic hybrids. Transparent thin films are synthesized with the solutions of porphyrin compounds and iron oxides which exhibit strong absorptions in the UV and IR regions. These spectral modulating thin films are photonically tuned via compositional optimization to absorb photons near 400 nm and above 1127 nm from solar spectrum to reduce thermalization and sub‐band‐gap absorption. These spectral modulators are applied in a particular configuration above a commercial silicon panel to partially filter the simulated solar light. The PCE of the silicon panel suffers a significant decrease due to temperature increase from 22.9 °C to 92.9 °C after 60 min solar irradiation, resulting in a PCE decrease from 25.1 % to 16.3 %. With the transparent spectral modulators, upon solar irradiation for 60 min, the maximum PCE has maintained at 20.5 %. The mechanisms of PCE enhancement are identified based on reduced thermalization and sub‐band‐gap absorption. As shown in this figure, a transparent spectral modulator (TSM) is placed under the solar simulator so that the light passes through it, shining on a silicon PV panel. These transparent spectral modulators are made of various porphyrin and iron oxide compounds with different absorption spectra. These spectral modulators can effectively modify the incoming solar light spectrum by retarding photons in certain frequency ranges to suppress IR heating and thermalization so that PCE can be further increased under prolonged solar irradiation. A portion of solar light is able to direcly shine on the PV panel surface in the patterned region marked in yellow for enhanced ISC, while the rest of the solarlight is to be modulated by TSM for reducing thermalization in the UV and heating in the IR regions in order to increase VOC. The area ratio of TSM film‐covered to the unconvered PV surface is optimized for maximum PCE and output power. This article is protected by copyright. All rights reserved.

Advanced Light Management for Encapsulated Silicon Solar Cells: An Antireflective Textured Film with a Down-Shifting Lead-free Perovskite Cs2AgxNa1- xBiyIn1- yCl6 Phosphor

Enhanced Crystallization and Optimized Morphology of Perovskite through Doping Indium-Based Metal-Organic Assembly: Achieving Significant Solar Cell Efficiency Enhancements

Internal Encapsulation Strategy Using a Polymer Enables Efficient, Stable, and Lead‐Safe Inverted Perovskite Solar Cells

Internal Encapsulation for Lead Halide Perovskite Films for Efficient and Very Stable Solar Cells

Large-Area 23%-Efficient Monolithic Perovskite/Homojunction-Silicon Tandem Solar Cell with Enhanced UV Stability Using Down-Shifting Material

Parylene-Sealed Perovskite Nanocrystals Down-Shifting Layer for Luminescent Spectral Matching in Thin Film Photovoltaics

Optimization of Light Management Layers for Light Harvest of Perovskite Solar Cells.

Synergistic Defect Healing and Device Encapsulation via Structure Regulation by Silicone Polymer Enables Durable Inverted Perovskite Photovoltaics with High Efficiency

An Internal Encapsulating Layer for Efficient, Stable, Repairable and Low-lead-leakage Perovskite Solar Cells

Low-loss contacts on textured substrates for inverted perovskite solar cells

Continuously in-situ manufacture of perovskite quantum dots/POE encapsulation adhesive film for silicon solar cell enhancement application

Enhancing perovskite solar cells efficiency through cesium fluoride mediated surface lead iodide modulation

Highly Efficient Perovskite Solar Cells with Light Management of Surface Antireflection

UV Encapsulated Monolithic Perovskite/Silicon Tandem Solar Cells for Hundred-Watt Power System

Light management in highly-textured perovskite solar cells: From full-device ellipsometry characterization to optical modelling for quantum efficiency optimization

Enhanced Silicon PV efficiency by solar light spectral modulation via photonically tuned porphyrin‐iron oxide hybrid thin films

Omni-directional light capture in PERC solar cells enhanced by stamping hierarchical structured silicone encapsulation that mimics leaf epidermis

Synergetic Excess PbI2 and Reduced Pb Leakage Management Strategy for 24.28% Efficient, Stable and Eco‐Friendly Perovskite Solar Cells

Internal Capsulation Via Self‐Cross‐linking and π‐Effects Achieves Highly Stable Perovskite Solar Cells

Light management of PERC solar cell with the front and back dielectric multilayers

An Effective Encapsulation for Perovskite Solar Cells Based on Its Building Integration Photovoltaics