1-1 Inactivation of Drosophila Huntingtin affects long-term adult functioning and the pathogenesis of a Huntington ’ s disease model

Shenmin Zhang,M. Feany,S. Saraswati,J. Littleton,N. Perrimon

Abstract:

What problem does this paper attempt to address?

Accuracy of total knee arthroplasty assisted by a kind of homemade robot: a multicenter randomized controlled trial

SHAO Hongyi,WU Lidong,CAO Guanglei,LI Zheng,YANG Dejin,ZHOU Yixin

DOI: https://doi.org/10.3969/j.issn.2095-9958.2023.04.04

2023-01-01

Abstract:Objective: To evaluate the operation accuracy of total knee arthroplasty assisted by a kind of homemade robot（TiRobot Recon）. Methods: This was a multicenter prospective randomized controlled study. From January 2021 to January 2022, 116 patients who would undergo total knee arthroplasty were randomly divided into robotic group and traditional operation group according to the ratio of 1∶1. Among them, the average age was（69.8±6.2） years with 30 male patients and 86 female patients. The primary outcome of this study was hip-knee-ankle angle（HKA angle） compared between the two groups, while secondary outcomes included femoral component（α angle） and tibial component angle（β angle） in coronal position, femoral component（γ angle） and tibial component angle（δ angle） in sagittal position and transverse femoral component rotation angle（ρ angle）. Results: The deviation rate of the HKA, and the position of femoral and tibial components（α angle, β angle, γ angle, δ angle and ρ angle） relative to the target in the robot group were lower than traditional operation group postoperatively（P＜0.001）. There were no serious complications in the two groups. Conclusions:The robotic system can improve the accuracy of lower limb alignment and prosthesis position compared with traditional surgery.
Robotic-assisted total knee arthroplasty is more advantageous for knees with severe deformity: a randomized controlled trial study design.

Run Tian,Xudong Duan,Ning Kong,Xinhua Li,Jian Wang,Hua Tian,Zhanjun Shi,Shigui Yan,Jingyi Lyu,Kunzheng Wang,Pei Yang

DOI: https://doi.org/10.1097/JS9.0000000000000002

2023-01-01

Abstract:This new robotic-assisted TKA system is safe and effective. The authors found that preoperative HKA angle deviation affects the postoperative HKA angle deviation. The robotic-assisted system has similar results to those reported by the traditional method with regard to restoring the mechanical axis of the leg and improving prosthesis alignment and clinical outcomes in patients with slight lower extremity alignment deviations preoperatively. For patients with severe preoperative lower extremity alignment deviations, the effectiveness in terms of the improvement in mechanical axis of the leg and prosthesis alignment were better with the robotic-assisted system, whereas the effectiveness of clinical outcomes was similar. A larger sample size and longer follow-up period are needed to determine whether the improved mechanical axis of the leg and prosthesis alignment observed with the robotic-assisted system can achieve better long-term radiographic and clinical outcomes.
A systematic review of MAKO-assisted Unicompartmental Knee Arthroplasty.

Jiyan Lin,Shigui Yan,Zhaoming Ye,Xiang Zhao

DOI: https://doi.org/10.1002/RCS.2124

2020-01-01

International Journal of Medical Robotics and Computer Assisted Surgery

Abstract:: Unicompartmental knee arthroplasty (UKA) which has many potential advantages compared with total knee arthroplasty (TKA) was widely used across the world in recent years. The introduction of the robot systems greatly makes up for the defects of the conventional UKA surgery such as higher complication rates and revision rates. MAKO system, a new image-guided robot system relies on a preoperative computed tomography (CT) scan to assist in preoperative mapping and planning, offers an opportunity to improve the outcome of UKA surgeries. In order to have a more comprehensive and in-depth understanding of MAKO-assisted UKA, the studies on MAKO-assisted UKA were summarized. MAKO-assisted UKA is better than conventional UKA surgery on implant accuracy, soft tissue balance, patient function scores and satisfaction, complications rates, and learning curve in short-term, however, the mid-term and long-term outcomes of MAKO-assisted UKA need to be further studied. This article is protected by copyright. All rights reserved.
MAKO robotic arms assisted complete challenging total knee arthroplasty

Kai Fu,Liming Zheng,Jun Lu,Jianghui Qin,Dongyang Chen,Qing Jiang

DOI: https://doi.org/10.21203/rs.3.rs-1770146/v1

2022-01-01

Abstract:Abstract Objectives: To determine whether robotic-arm assisted TKA is more suitable in the challenging cases (valgus or varus deviation ≥ 15°).Methods: In total, 99 participants undergoing primary TKA from May 1st, 2021, to Sep 1st, 2021 were analyzed. According to the degree of knee deformity and surgical method, they were divided into 4 groups, including the challenging conventional TKA group (CCT group, n=23), challenging CT-based robotic-arm assisted TKA group (CCRAT group, n=26), regular conventional TKA group (RCT group, n=27), and regular CT-based robotic-arm assisted TKA group (RCRAT group, n=26). We compared the prosthesis location, perioperative bleeding, and 6-months follow-up clinical function to evaluate the surgical method comprehensively. Results: There was a significant improvement in the correction of mechanical axis and coronal tibial component location both in the RCRAT and CCRAT groups. Also, secondary analyses indicated better scores in OKS and HSS questionnaires at a 6-months follow-up and less intraoperative blood loss in CRAT groups. However, compared with CCT groups, CRAT brought more postoperative pain and bleeding, especially in the RCRAT group. Conclusion: The CRAT improved the spatial accuracy of the prosthesis and postoperative knee function, as well as decreasing intraoperative bleeding in TKA, especially in challenging TKA. We concluded that the CRAT should be strongly suggested in challenging situations.
Robotic arthroplasty software training improves understanding of total knee arthroplasty alignment and balancing principles: a randomized controlled trial

Ahmed Saad,S Bleibleh,B Kayani,R Plastow,M Ollivier,Ed Davis,A Sharma

DOI: https://doi.org/10.1007/s11701-024-02043-0

2024-08-06

Abstract:Understanding alignment and gap balancing in Total Knee Arthroplasty (TKA) can be challenging for trainee and experienced orthopedic surgeons. Traditional learning methods may not effectively translate to real-life scenarios. The advent of advanced technologies like robotic surgery and navigation systems has revolutionized intraoperative understanding of gap balancing techniques. This trial aims to investigate the effectiveness of robotic TKA planning software in educating trainees about alignment and ligament balancing. We hypothesize that a single session with the software will significantly enhance trainees' understanding of these techniques. This UK-based single-center, two-arm, group parallel randomized controlled trial was conducted during a national robotic arthroplasty symposium. It aims to evaluate the effect of robotic knee arthroplasty software training on understanding TKA alignment and gap balancing principles using Multiple Choice Questions (MCQs). The MCQ test was crafted based on established guidelines from a different institution with expert consensus in the field. Our study revealed that baseline knowledge of gap balancing and alignment principles was generally low among all participants. However, the intervention group, which received comprehensive robotic software training, demonstrated a significant improvement in their MCQ scores compared to the control group, which did not undergo the training. In conclusion, our study demonstrates that robotic arthroplasty software training significantly improves the understanding of TKA alignment and balancing principles among orthopedic trainees. Level of Evidence II.
Imageless robotic handpiece-assisted total knee arthroplasty: a learning curve analysis of surgical time and alignment accuracy

Peter Savov,Lars-Rene Tuecking,Henning Windhagen,Jonathan Ehmig,Max Ettinger

DOI: https://doi.org/10.1007/s00402-021-04036-2

IF: 2.928

2021-07-14

Archives of Orthopaedic and Trauma Surgery

Abstract:Abstract Introduction Robotic-assisted surgery techniques are increasing in total knee arthroplasty (TKA). One crucial point is the prolonged time of surgery. The primary objective of this study was to determine the learning curve necessary to minimize the time of surgery. The secondary objective was to evaluate the accuracy of the implant alignment when using an imageless robotic system for TKA. Materials and methods In a case–control study, the first 70 consecutive robotic-assisted TKA procedures performed by a single senior surgeon were analyzed with regard to surgery time and implant alignment by comparing the intraoperative plan with the postoperative alignment. The evaluation of the learning curve with respect to surgery time was conducted using cumulative summation (CUSUM) analysis. The joint line height was measured with a new technique. Surgery time and joint line reconstruction were compared to 70 consecutive conventional TKA procedures. Results The learning curve for robotic TKA was completed after 11 cases. The learning curve did not influence the accuracy of joint line obliquity, joint line height, or limb alignment. The intraoperative plan designed for the robotic system was precisely implemented. The mean skin-to-skin time in the robotic group after the learning curve was completed did not differ from that in the manual group. A significant positive correlation was observed between the preoperative hip–knee–ankle angle and the postoperative distalization of the joint line in the robotic-assisted TKA group. Conclusion After completing the initial learning curve of 11 cases, the surgery time required to perform imageless robotic handpiece-assisted TKA was similar to that for the conventional technique. However, no learning curve was observed for the implant positioning when using the imageless robotic system. The implementation of the intraoperative plan was accurate up to < 2°. The precision of the system allows the implementation of different joint balancing approaches between valgus and varus morphotypes.

surgery,orthopedics
Improved Component Placement Accuracy with Robotic-Arm Assisted Total Knee Arthroplasty

Ormonde Mahoney,Tracey Kinsey,Nipun Sodhi,Michael A. Mont,Antonia F. Chen,Fabio Orozco,William Hozack

DOI: https://doi.org/10.1055/s-0040-1715571

2020-08-31

The Journal of Knee Surgery

Abstract:Abstract Component position of total knee arthroplasty (TKA) has been shown to influence prosthetic survivorships and clinical outcomes. Our objective was to compare the three-dimensional accuracy to plan of robotic-arm assisted TKA (RATKA) with conventional TKA for component position. We conducted a nonrandomized, prospective study comparing 143 RATKA with 86 conventional TKA operated at four U.S. centers between July 2016 and October 2018. Computed tomography (CT) scans obtained approximately 6 weeks postoperatively were analyzed using anatomical landmarks. Absolute deviation from surgical plans were defined as the absolute value of the difference between the CT measurements and surgeons' femoral and tibial component mechanical varus/valgus alignment, tibial component posterior slope, and femoral component internal/external rotation. Differences of absolute deviations were tested using stratified Wilcoxon's tests that controlled for study center. Patient-reported outcome measures collected through 1 postoperative year were modeled using multiple regression controlling for age, sex, body mass index, study center, and the preoperative score. RATKA demonstrated greater accuracy for tibial component alignment (median [25th, 75th percentiles] absolute deviation from plan of all centers combined for conventional vs. RA, 1.7 [0.9, 2.9] vs. 0.9 [0.4, 1.9] degrees, p < 0.001), femoral component rotation (1.5 [0.9, 2.5] vs. 1.3 [0.6, 2.5] degrees, p = 0.015), and tibial slope (2.9 [1.5, 5.0] vs. 1.1 [0.6, 2.0] degrees, p < 0.001). In multivariable analyses, RATKA showed significantly greater Veterans RAND 12-item health survey (VR-12) physical component scores (adjusted mean difference [95% confidence interval (CI)]: 2.4 [0.2, 4.5] points, p = 0.034) and qualitatively greater Knee Society (KS) composite functional scores (3.5 [−1.3, 8.2] points, p = 0.159), though not statistically significant. Compared with conventional instrumentation, RATKA demonstrated greater three-dimensional accuracy to plan for various component positioning parameters and clinical improvements in physical status and function with no major safety concerns during the first postoperative year. These results may be attributed to the preoperative CT scan planning, real-time intraoperative feedback, and stereotactic-guided cutting that takes into consideration patient-specific bony anatomy. These findings support the use of RATKA for enhanced arthroplasty outcomes.
Neurological picture. Medial medullary infarction.

R. Nandhagopal,S. Krishnamoorthy,D. Srinivas

Journal of Neurology Neurosurgery & Psychiatry

Abstract:
Robotic Total Knee Arthroplasty: An Update

Gennaro Pipino,Alessio Giai Via,Marco Ratano,Marco Spoliti,Riccardo Maria Lanzetti,Francesco Oliva

DOI: https://doi.org/10.3390/jpm14060589

2024-05-30

Abstract:Total knee arthroplasty (TKA) is a gold standard surgical procedure to improve pain and restore function in patients affected by moderate-to-severe severe gonarthrosis refractory to conservative treatments. Indeed, millions of these procedures are conducted yearly worldwide, with their number expected to increase in an ageing and more demanding population. Despite the progress that has been made in optimizing surgical techniques, prosthetic designs, and durability, up to 20% of patients are dissatisfied by the procedure or still report knee pain. From this perspective, the introduction of robotic TKA (R-TKA) in the late 1990s represented a valuable instrument in performing more accurate bone cuts and improving clinical outcomes. On the other hand, prolonged operative time, increased complications, and high costs of the devices slow down the diffusion of R-TKA. The advent of newer technological devices, including those using navigation systems, has made robotic surgery in the operatory room more common since the last decade. At present, many different robots are available, representing promising solutions to avoid persistent knee pain after TKA. We hereby describe their functionality, analyze potential benefits, and hint at future perspectives in this promising field.
Robot-assisted total knee arthroplasty is associated with a learning curve for surgical time but not for component alignment, limb alignment and gap balancing

Hannes Vermue,Thomas Luyckx,Philip Winnock de Grave,Alexander Ryckaert,Anne-Sophie Cools,Nicolas Himpe,Jan Victor

DOI: https://doi.org/10.1007/s00167-020-06341-6

2020-11-03

Abstract:The application of robotics in the operating theatre for total knee arthroplasty (TKA) remains controversial. As with all new technology, the introduction of new systems is associated with a learning curve and potentially associated with extra complications. Therefore, the aim of this study is to identify and predict the learning curve of robot-assisted (RA) TKA.

surgery,orthopedics,sport sciences
Real-world accuracy of robotic-assisted total knee arthroplasty and its impact on expedited recovery

Wai Kit Wong,Azliana Abu Bakar Sajak,Hwa Sen Chua

DOI: https://doi.org/10.1007/s11701-024-02059-6

2024-08-06

Abstract:Despite total knee arthroplasty (TKA) being the gold standard for end-stage knee osteoarthritis, 20% of patients remain dissatisfied. Robotic-assisted arthroplasty promises unparalleled control of the accuracy of bone cuts, implant positioning, control of gap balance, and resultant hip-knee-ankle (HKA) axis. Patients underwent clinical and radiological assessments, including knee CT scans and patient-reported outcome measures (PROMs), preoperatively. Follow-up assessments were conducted at 2 weeks, 6 weeks, and 3 months post-operatively, with imaging repeated at 6 weeks. A total of 155 patients underwent robotic-assisted TKA and have completed 3 months of follow-up. Mean pre-operative HKA axis was 7.39 ± 5.52 degrees varus, improving to 1.34 ± 2.22 degrees varus post-operatively. Restoration of HKA axis was 0.76 ± 1.9 degrees from intra-operative planning (p < 0.0005). Implant placement accuracy in the coronal plane was 0.08 ± 1.36 degrees (p = 0.458) for the femoral component and 0.71 ± 1.3 degrees (p < 0.0005) for the tibial component. Rotational alignment mean deviation was 0.39 ± 1.49 degrees (p = 0.001). Most patients (98.1%) had ≤ 2 mm difference in extension-flexion gaps. PROM scores showed improvement and exceeded pre-operative scores by 6 weeks post-surgery. Robotic-assisted knee arthroplasty provides precise control over traditionally subjective factors, demonstrating excellent early post-operative outcomes.Level of evidence Prospective observational study-II.
Robotic trials in arthroplasty surgery

Chetan Khatri,Andrew Metcalfe,Peter Wall,Martin Underwood,Fares S. Haddad,Edward T. Davis

DOI: https://doi.org/10.1302/0301-620x.106b2.bjj-2023-0711.r1

2024-02-01

The Bone & Joint Journal

Abstract:Total hip and knee arthroplasty (THA, TKA) are largely successful procedures; however, both have variable outcomes, resulting in some patients being dissatisfied with the outcome. Surgeons are turning to technologies such as robotic-assisted surgery in an attempt to improve outcomes. Robust studies are needed to find out if these innovations are really benefitting patients. The Robotic Arthroplasty Clinical and Cost Effectiveness Randomised Controlled Trials (RACER) trials are multicentre, patient-blinded randomized controlled trials. The patients have primary osteoarthritis of the hip or knee. The operation is Mako-assisted THA or TKA and the control groups have operations using conventional instruments. The primary clinical outcome is the Forgotten Joint Score at 12 months, and there is a built-in analysis of cost-effectiveness. Secondary outcomes include early pain, the alignment of the components, and medium- to long-term outcomes. This annotation outlines the need to assess these technologies and discusses the design and challenges when conducting such trials, including surgical workflows, isolating the effect of the operation, blinding, and assessing the learning curve. Finally, the future of robotic surgery is discussed, including the need to contemporaneously introduce and evaluate such technologies. Cite this article: Bone Joint J 2024;106-B(2):114–120.

surgery,orthopedics
Better accuracy of robotic-assisted total knee arthroplasty compared to conventional technique in patients with failed high tibial osteotomy

Ji-Hoon Baek,Su Chan Lee,Dong Nyoung Lee,Juneyoung Heo,Taehyeon Kim,Hye Sun Ahn,Chang Hyun Nam

DOI: https://doi.org/10.1371/journal.pone.0313391

IF: 3.7

2024-11-12

PLoS ONE

Abstract:This study aimed to compare the clinical outcomes, mechanical axis, component positioning, leg length discrepancy (LLD), and polyethylene liner thickness between robotic-assisted total knee arthroplasty (TKA) and conventional TKA in patients with failed high tibial osteotomy (HTO). A total of 30 patients (30 knees) with failed HTO who underwent TKA using a robot-assisted system between June 2020 and December 2023 were included in this study (robotic group). Additionally, 60 patients (60 knees) with failed HTO who underwent conventional TKA were included as controls (conventional group). Propensity score matching was performed using a 2:1 ratio between the matched participants. The mean follow-up period was 2.1 years in the robotic group and 2.2 years in the conventional group. Clinical evaluations were performed using the Knee Society Score (KSS) rating system. Mechanical axis, component coronal and sagittal positioning, and LLD were evaluated using postoperative radiographs. The thickness of the polyethylene liner was also determined. The mean error values and outliers were calculated and compared between the two groups to determine the accuracy of the mechanical axis, postoperative component positioning, and LLD. The postoperative KSSs in the robotic and conventional groups were not statistically different. The robotic group achieved better accuracy than the conventional group in terms of postoperative mean mechanical axis (1.7° vs. 2.4°, p < 0.05), femur coronal inclination (90.0° vs. 91.6°, p < 0.05), tibial coronal inclination (90.3° vs. 91.3°, p < 0.05), tibial sagittal inclination (90.5° vs. 91.4°, p < 0.05), and LLD (2.2 vs. 7.0 mm, p < 0.05). A significant difference in polyethylene liner thickness was observed between the two groups (p < 0.05). Robotic-assisted TKA showed improved mechanical axis, higher accuracy of component positioning and polyethylene liner thickness, and reduced LLD compared with those of conventional TKA in patients with failed HTO. Further studies with a larger sample size and long-term follow-up are warranted to ascertain whether the accuracy of robotic-assisted TKA can translate into better clinical outcomes and patient satisfaction.

multidisciplinary sciences
Differential interaction between 5-HT3 receptors and GABAergic neurons inhibiting acetylcholine release in rat entorhinal cortex slices

M. Dı́ez-Ariza,M. Ramírez,B. Lasheras,J. Rı́o

DOI: https://doi.org/10.1016/S0006-8993(98)00562-9

IF: 3.61

1998-08-10

Brain Research

Abstract:
Separation of phospholipids from hen egg yolk by short packed silica gel column chromatography.

Lin Lei,Jing Li,Jiang-Ning Hu,Rong Liu,Ya-wei Fan,L. Tang,Z. Deng

DOI: https://doi.org/10.1111/j.1750-3841.2012.02850.x

IF: 3.9

2012-09-01

Journal of Food Science

Abstract:Short packed silica gel column chromatography has been performed to optimize the production of phosphatidylethanolamine (PE) and phosphatidylcholine (PC) from hen egg yolk with very low or no toxic solvents. The effects of silica type, sample loading amount, dimension of the glass chromatotube, and mobile phase compositions were investigated and high separation efficiency was achieved: gradient elution as 200 mL ethanol followed by 300 mL 95% ethanol to fractionate PE and PC after neutral lipids (NL) removed by 120 mL ethyl acetate, 40 mm silica gel (54 to 74 μm) bed height of the chromatotube with 22 mm inner dia (ID), and 0.25 g sample loading amount. By this procedure, 3.69 g PE and 2.88 g PC per 100 g egg yolk lipids were obtained, respectively. The refined PE and PC were identified by high-performance liquid chromatography/ultraviolet detector (HPLC-UV) with purity over 96%. The fatty acids in egg yolk revealed that PE and PC characterized higher ratios of n- 6/n- 3 (PE, 7.41; PC, 8.99). 18:2 n- 6 of PC (15.21%) predominated over PE (10.29%), whereas the level of 20:4 n- 6 of PC (8.78%) was lower than PE (15.67%).
High in‐vivo accuracy of a novel robotic‐arm‐assisted system for total knee arthroplasty

Faseeh Zaidi,Craig M. Goplen,Connor Fitz‐Gerald,Scott M. Bolam,Michael Hanlon,Jacob T. Munro,Andrew P. Monk

DOI: https://doi.org/10.1002/ksa.12272

2024-05-22

Knee Surgery Sports Traumatology Arthroscopy

Abstract:Purpose Robotic‐assisted total knee arthroplasty (TKA) has been shown to improve the accuracy and precision of bony resections and implant position. However, the in vivo accuracy of the full surgical workflow has not been widely reported. The primary objective of this study is to determine the accuracy and precision of a robotic‐arm‐assisted system throughout the intraoperative workflow. Methods This was a retrospective cohort study of adult patients who underwent primary TKA with various workflows and alignment targets by three arthroplasty‐trained surgeons with previous experience using the ROSA® Knee System (Zimmer Biomet) over a 3‐month follow‐up period. Accuracy and precision were determined by measuring the difference between various workflow time points, including the final preoperative plan (PP), robot‐validated (RV) resection angle and postoperative radiographs (PR). The absolute mean difference between the measurements determined accuracy, and the standard deviation represented precision. The lateral distal femoral angle, medial proximal tibial angle, femoral flexion angle and tibial slope were measured on postoperative coronal long‐leg radiographs and true short‐leg lateral radiographs. Results A total of 77 patients were included in the final analyses. The accuracy for the coronal femoral angle was 1.62 ± 1.11°, 0.75 ± 0.79° and 1.96 ± 1.29° for the differences between PP and PR, PP and RV and RV and PR. The tibial coronal accuracy was 1.44 ± 1.03°, 0.81 ± 0.67° and 1.57 ± 1.14° for PP/PR, PP/RV and RV/PR, respectively. Femoral flexion accuracy was 1.39 ± 1.05°, 0.83 ± 0.59° and 1.81 ± 1.21° for PP/PR, PP/RV and RV/PR, respectively. Tibial slope accuracy was 0.99 ± 0.72°, 1.19 ± 0.87° and 1.63 ± 1.11°, respectively. The proportion of patients within 3° was 93.2%, 95.3%, 97.3% and 94.6% for the distal femur, proximal tibia, femoral flexion and tibial slope angles when the final intraoperative plan was compared to PRs. No patients had a postoperative complication at the final follow‐up. Conclusions The ROSA Knee System has acceptable accuracy and precision of coronal and sagittal plane resections with few outliers at various steps throughout the platform's entire workflow in vivo. Level of Evidence Level III.

surgery,orthopedics,sport sciences
Robot-assisted surgery in total knee arthroplasty: trauma maker or trauma savior? A prospective, randomized cohort study

Zhonghua Xu,Hua Li,Zaiyang Liu,Jie Li,Jun Zhang,Min Wang,Yuan Zhang

DOI: https://doi.org/10.1093/burnst/tkac034

2022-01-01

Burns & Trauma

Abstract:Abstract Background Robotic assistance has been increasingly employed to improve the operative precision in modern knee surgery. The purpose of the study was to evaluate the trauma effect of one of the first domestically developed orthopedic surgical robots in China in a clinical trial of robot-assisted total knee arthroplasty (RA-TKA). Methods A total of 33 patients who underwent unilateral TKA for end-stage osteoarthritis were randomized to receive RA-TKA (17 cases) or conventional manual TKA (CM-TKA) in our institution in 2020. The trauma effects of the 4 main indicators with 48 sub-indicators in terms of subsectional operative time, inflammation and coagulation markers, physical and radiographical analyses of osteotomy deviation, and postoperative comfort were analyzed. Results Subsectional operative time analysis showed that the times for bone cutting and gap balancing with RA-TKA were 5.3 and 2.2 min shorter than those with CM-TKA (p = 0.010, p = 0.02), respectively. Arterial blood gas indicators (partial pressure of carbon dioxide, partial pressure of oxygen and SO2) 24 h after RA-TKA, as well as the white blood cell count and neutrophil ratio, were significantly lower than those after CM-TKA (p < 0.05). Inflammatory markers at 72 h after surgery showed the increments of C-reactive protein, erythrocyte sedimentation rate and D-dimer of RA-TKA declined by 180.7, 22.0 and 1050.0% (p < 0.05), respectively, referenced to the preoperative baseline values, as compared to CM-TKA. Mechanical deviation distribution exhibited percentages of region I errors for RA-TKA and CM-TKA of 76.5% and 27.1% (p = 0.000), respectively, and the success rates of one-time osteotomy were 94.1% and 62.5% (p = 0.039), respectively. Radiographical verification showed RA-TKA was more conducive to achieving mechanical alignment and ideal tibial component azimuths. Postoperative efficacy showed that patients were more comfortable after RA-TKA in terms of reduced administration of tranexamic acid, hydrocortisone and the utilization rate of temporary intensive opioid analgesics. No statistical difference in patient-reported outcome measures and complications were recorded between the two groups during continuous observation. Conclusions Compared with CM-TKA, RA-TKA decreases rather than increases trauma. It might shorten the time required for bone cutting and gap balancing, reduce mechanical errors related to the osteotomy and prosthesis position, and improve the accuracy of the mechanical alignment reconstruction. RA-TKA is also favorable in promoting postoperative comfort and minimizing inflammatory response and drug consumption. Trial registration The Chinese Clinical Trial Registry (ChiCTR2000031282) approved registration on 26 March 2020.

dermatology,surgery,emergency medicine
Robots on the Stage: A Snapshot of the American Robotic Total Knee Arthroplasty Market

Avinash Inabathula,Dimitar I Semerdzhiev,Anand Srinivasan,Farid Amirouche,Lalit Puri,Hristo Piponov

DOI: https://doi.org/10.2106/JBJS.OA.24.00063

2024-09-05

JBJS Open Access

Abstract:» Computer-assisted robots aid orthopaedic surgeons in implant positioning and bony resection. Surgeons selecting a robot for their practice are faced with numerous options. This study aims to make the choice less daunting by reviewing the most commonly used Food and Drug Administration-approved robotic total knee arthroplasty platforms in the American arthroplasty market.» Modern total knee arthroplasty (TKA) robots use computer guidance to create a virtual knee model that serves as the surgeon's canvas for resection planning.» Most available robotic TKA (rTKA) systems are closed semiactive systems that restrict implant use to those of the manufacturer.» Each system has distinct imaging requirements, safety features, resection methods, and operating room footprints that will affect a surgeon's technique and practice.» Robots carry different purchase, maintenance, and equipment costs that will influence patient access across different socioeconomic groups.» Some studies show improved early patient-reported outcomes with rTKA, but long-term studies have yet to show clinical superiority over manual TKA.
Active Robotic Total Knee Arthroplasty (TKA): Initial Experience with the TSolution One ® TKA System

Jason Chan,Thomas S Auld,William J Long,Stefan Kreuzer,Valentina Campanelli,Ralph Liebelt,Yair D Kissin

2020-11-28

Abstract:Several recent advances, including the use of robotic devices, have been explored to improve outcomes in total knee arthroplasty (TKA). The TSolution One ® Total Knee Application (THINK Surgical, Inc., Fremont, CA, USA) introduces an active robotic device that supports an open implant platform and CT-based preoperative planning workflow, and requires minimal surgeon intervention for making bone cuts. Our experience was part of a multi-center, prospective, non-randomized trial assessing the safety and effectiveness of this active robotic system for TKA. Each patient underwent a preoperative CT-scan, which was uploaded to proprietary planning software. The surgeon reviewed the software-generated 3D digital model, selected the appropriate implants and generated a final preoperative plan. Intra-operatively, a standard medial parapatellar approach was used. The leg was then rigidly attached to the robot via fixation pins, and registration markers were placed in the tibia and femur. Landmark registration was performed to inform the robot of the knee's position in space and to confirm the robot's ability to execute the preoperative plan. Next, the robot performed femoral and tibial cuts using a cutter in a sequential fashion along a defined cut-path. The robot was then removed from the operative field and the surgeon completed the procedure by removing marginal bone and performing final balancing and implantation in the usual fashion. The TSolution One® Total Knee Application is a computer-assisted device that potentially allows a surgeon to make more accurate cuts and to determine optimal implant position based on the patient's specific anatomy. It is the only active robotic system currently available. In this manuscript, we describe the operative technique and workflow involved in performing this surgery and offer insight on optimizing safety and efficiency as we introduce new technologies to the operating theater. We also present two cases performed by the senior author to further demonstrate technical aspects of the procedure.
Simultaneous Evaluation of Bone Cut and Implant Placement Accuracy in Robotic-Assisted Total Knee Arthroplasty

Killian Cosendey,Julien Stanovici,Hugues Cadas,Patrick Omoumi,Brigitte M. Jolles,Julien Favre

DOI: https://doi.org/10.3390/jcm13051293

IF: 3.9

2024-02-25

Journal of Clinical Medicine

Abstract:Background: This study aimed to evaluate the accuracy of bone cuts and implant placements, simultaneously, for total knee arthroplasty (TKA) performed using a system with an active robotic arm. Methods: Two experienced orthopaedic surgeons performed TKA on ten cadaveric legs. Computed tomography scans were performed to compare the bone cuts and implant placements with the preoperative planning. The differences between the planned and actual bone cuts and implant placements were assessed using positional and angular errors in the three anatomical planes. Additionally, the cut–implant deviations were calculated. Statistical analysis was performed to detect systematic errors in the bone cuts and implant placements and to quantify the correlations between these errors. Results: The root-mean-square (RMS) errors of the bone cuts (with respect to the planning) were between 0.7–1.5 mm and 0.6–1.7°. The RMS implant placement errors (with respect to the planning) varied between 0.6–1.6 mm and 0.4–1.5°, except for the femur and tibia in the sagittal plane (2.9°). Systematic errors in the bone cuts and implant placements were observed, respectively, in three and two degrees of freedom. For cut–implant deviations, the RMS values ranged between 0.3–2.0 mm and 0.6–1.9°. The bone cut and implant placement errors were significantly correlated in eight degrees-of-freedom (ρ ≥ 0.67, p < 0.05). Conclusions: With most of the errors below 2 mm or 2°, this study supported the value of active robotic TKA in achieving accurate bone cuts and implant placements. The findings also highlighted the need for both accurate bone cuts and proper implantation technique to achieve accurate implant placements.

medicine, general & internal

1-1 Inactivation of Drosophila Huntingtin affects long-term adult functioning and the pathogenesis of a Huntington ’ s disease model

Accuracy of total knee arthroplasty assisted by a kind of homemade robot: a multicenter randomized controlled trial

Robotic-assisted total knee arthroplasty is more advantageous for knees with severe deformity: a randomized controlled trial study design.

A systematic review of MAKO-assisted Unicompartmental Knee Arthroplasty.

MAKO robotic arms assisted complete challenging total knee arthroplasty

Robotic arthroplasty software training improves understanding of total knee arthroplasty alignment and balancing principles: a randomized controlled trial

Imageless robotic handpiece-assisted total knee arthroplasty: a learning curve analysis of surgical time and alignment accuracy

Improved Component Placement Accuracy with Robotic-Arm Assisted Total Knee Arthroplasty

Neurological picture. Medial medullary infarction.

Robotic Total Knee Arthroplasty: An Update

Robot-assisted total knee arthroplasty is associated with a learning curve for surgical time but not for component alignment, limb alignment and gap balancing

Real-world accuracy of robotic-assisted total knee arthroplasty and its impact on expedited recovery

Robotic trials in arthroplasty surgery

Better accuracy of robotic-assisted total knee arthroplasty compared to conventional technique in patients with failed high tibial osteotomy

Differential interaction between 5-HT3 receptors and GABAergic neurons inhibiting acetylcholine release in rat entorhinal cortex slices

Separation of phospholipids from hen egg yolk by short packed silica gel column chromatography.

High in‐vivo accuracy of a novel robotic‐arm‐assisted system for total knee arthroplasty

Robot-assisted surgery in total knee arthroplasty: trauma maker or trauma savior? A prospective, randomized cohort study

Robots on the Stage: A Snapshot of the American Robotic Total Knee Arthroplasty Market

Active Robotic Total Knee Arthroplasty (TKA): Initial Experience with the TSolution One ® TKA System

Simultaneous Evaluation of Bone Cut and Implant Placement Accuracy in Robotic-Assisted Total Knee Arthroplasty