Abstract:Hydrogen storage is one of the most significant research areas for exploiting hydrogen energy economy. To store hydrogen with a high gravimetric/volumetric density, gaseous hydrogen storage systems require a very high-pressure compressed gas cylinder which is quite unsafe and the storage in the liquid form needs cryogenic containers to be maintained at roughly 20 K under ambient pressure because hydrogen has a very low critical temperature of 33 K. However, hydrogen can be stored in solid materials with higher concentration of hydrogen compared to the gaseous and liquid hydrogen storage systems. It is therefore, worthwhile to look into the experimental and theoretical research on prospective hydrogen storage materials. The hydride-forming alloys and intermetallic compounds are found to be the most important families of hydrogen storage materials. Multicomponent alloys consisting of five or more principal elements, also known as high-entropy alloys appear to have potential for the development as hydrogen storage materials. Hydride-forming elements like Ti, Zr, V, Nb, Hf, Ta, La, Ce, Ni, and others have been shown to have hydrogen storage properties and the ability to produce single-phase high-entropy intermetallics. Here, attempts will be made to present a short review on utilization of multicomponent high-entropy alloys as solid hydrogen storage materials. Furthermore, we will also present some of our work on the synthesis, structural–microstructural characterization and hydrogen storage properties of Ti–Zr–V–Cr–Ni equi-atomic hydride-forming high-entropy alloys. From the preliminary investigation, the maximum storage capacity in this system was observed to be 1.78 wt%, which is comparable to other hydrogen storage materials. The prospects of high-entropy-based alloys for hydrogen storage will be discussed.

Low temperature AB 5 alloys for thermal energy storage systems

Binding Energy Crossover Mechanism Enables Low-Temperature Hydrogen Storage Performance of Dual-Phase TiZrCrMnNi(VFe) High-Entropy Alloy

Hydrogen storage properties of TiMn2-based alloys

Low Temperature Electrochemical Properties of LaNi4.6−xMn0.4Mx (m=fe or Co) and Effect of Oxide Layer on EIS Responses in Metal Hydride Electrodes

Metal hydrides for thermochemical energy storage applications

Development of AB 2 -type TiZrCrMnFeCoV intermetallic high-entropy alloy for reversible room-temperature hydrogen storage

Electrochemical Properties and Structural Analysis of Non-Stoichiometric Hydrogen Storage Alloys

A Novel TiZrHfMoNb High-Entropy Alloy for Solar Thermal Energy Storage

Development of a Two‐Stage Hydrogen‐Based Thermochemical Energy Storage System

La–Ni Based Alloy Modification by Ce and Fe for the Next Hydrogen Storage in Low-Temperature Metal Hydrides

Crystal structure and hydrogen storage properties of AB-type TiZrNbCrFeNi high-entropy alloy

Hydrogen storage alloys for high-pressure suprapure hydrogen compressor

High-Entropy Hydrides for Fast and Reversible Hydrogen Storage at Room Temperature: Binding-Energy Engineering via First-Principles Calculations and Experiments

A New Li—Al—N—H System for Reversible Hydrogen Storage.

High-Entropy Alloys for Solid Hydrogen Storage: Potentials and Prospects

Optimization of AB2 type alloy composition with superior hydrogen storage properties for stationary applications

The Future of Hydrogen Economy: Role of High Entropy Alloys in Hydrogen Storage

High-entropy alloy TiV2ZrCrMnFeNi for hydrogen storage at room temperature with full reversibility and good activation

Experimental investigations on a coupled metal hydride based thermal energy storage system

High Active Hydrogen Storage Alloy Mg2NiH4 and Mg2Ni Synthesized at Temperatures Lower Than 733 K

Superior cycle life of TiZrFeMnCrV high entropy alloy for hydrogen storage