Abstract:The structural and dielectric characteristics of nano-crystalline La 1− x Y x FeO 3 , (0 < x < 0.3) perovskite samples synthesized through the citrate auto-combustion route were investigated The findings of X-ray diffraction (XRD) analysis revealed that the synthesized perovskites exhibited a polycrystalline orthorhombic structure with a space group Pnma . Furthermore, the tolerance factor was indicative of the phase stability of the orthoferrite series. Based on the refined XRD data, the size of the crystallites was estimated to be between 11.9 and 18.5 nm using size-strain plots (SSP). To gain more insight into the crystal structure, high-resolution transmission electron microscopy (HRTEM) was employed. The estimated size based on HRTEM calculations agreed with the XRD findings. The influence of annealing temperature on the frequency dependence of the dielectric response was thoroughly investigated for nano-crystalline La 1− x Y x FeO 3 perovskites. The investigation took place at room temperature as well as different annealing temperatures, with a comprehensive frequency range of 50 Hz to ~ 2 MHz. The incorporation of Y 3+ ions into LaFeO 3 (LFO) has resulted in a significant enhancement of the dielectric constant values. This improvement is attributed to the successful integration of Y 3+ ions, which have effectively modified the electrical properties of LFO. Furthermore, the annealing has been shown to enhance both the values of the dielectric constant, ε 1 (ω) and ε 2 (ω) , which are critical parameters for electronic devices. Based on a power law response, the AC conductivity displays an increase with dopant concentration and frequency. Additionally, it has been noted that the activation energy value for LFOY30 is slightly reduced by 0.01 eV in comparison to pure LFO. The AC conductivity of LFOY30 was observed to increase with thermal annealing over the temperature range of 333 K to 463 K. This result confirms the occurrence of thermally activated conduction in the material. Based on this finding, LFOY30 is deemed appropriate for use in applications that require effective heat dissipation. The frequency exponent, s, decreases with increasing temperature from 0.87 to 0.56 for LFO and from 0.488 to 0.42 for LFOY30, respectively, which is associated with the correlated barrier hopping (CBH) model. The maximum barrier height ( W M ) was around 0.26 eV. The loss tangent (tan δ ) variation was estimated as a function of frequency at different dopant concentrations and temperatures. Doping and annealing have been identified as appropriate measures for enhancing the electrical properties of the La 1− x Y x FeO 3 system, thereby making it a useful material for electronic devices.

Effect of calcination temperature on structural, optical, and morphological properties of RAlO 3 (R = La, Sm) perovskite oxides

Synthesis of LaCrO3 films using spray pyrolysis technique

First-principles study of the structural and elastic properties of orthorhombic rare-earth aluminates RAlO3 (R = Sm–Lu)

First-principles Study of the Structural and Elastic Properties of Orthorhombic Rare-Earth Aluminates RAlO 3 (R = Sm–Lu)

A first principle study of the perovskite lanthanum aluminate

Structural and magnetic characterization of nanocrystalline LaFeO 3 synthesized by low temperature combustion technique using different fuels

Study of lanthanum aluminate for cost effective electrolyte material for SOFC

Chemical-looping Reforming of Methane over La-Mn-Fe-O Oxygen Carriers: Effect of Calcination Temperature

Tuning the essential physical properties of thermodynamically stable LaAlO 3 perovskite: A first principles quantum analysis for the developments in optoelectronic devices

Synthesis, Structural and Optical Properties of (ALa)(FeMn)O6 (A = Ba and Sr) Double Perovskites

Synthesis and characterization of mixed oxides derived from lanthanum orthoferrite perovskite: exploring morphological, spectroscopic, and photocatalytic properties

Influence of La 3+ doping on structural and optical properties of SrCeO 3 perovskite

Sintering Temperature–induced Structural Transition in LaCrO3‐based Conducting Oxides Synthesized from Nano‐powders

Robust luminescent material with superior color purity: Sm 3+ ion-doped CaAl 4 O 7 phosphor synthesized in a cost-effective approach for solid-state lighting applications

Synthesis of LaAlO3 powder using triethanolamine

Effect of La2O3 as sintering aid on the structural, mechanical & electrical properties of Y2O3

Low Temperature Synthesis of Nanosized La1-Xcaxmno3 Using Amorphous Molecular Alloys As Precursors

Exploration on influence of calcination temperature on structure and surface acidity and basicity of Mg(Al)O composite oxide

Investigation of structural, morphological, optical, and magnetic properties of Sm-doped LaFeO3 nanopowders prepared by sol–gel method

Microstructure evolution, dielectric response, and conduction mechanism of La1–xYxFeO3, (0 < x < 0.3) annealed perovskites synthesized via a sol–gel combustion technique

Effect of La2O3 on Structure and Properties of Calcium-Hexaluminate Prepared by Reaction Sintering