Abstract:A numerical model of an iron bath smelting reduction furnace with side-bottom combined blowing was established to study the influence of blowing arrangements on the stirring effect of the molten pool, and the accuracy of numerical simulation was verified by water model experiment. By comparing the flow field of molten pool with single nozzle, double nozzles (symmetrical and asymmetrical), and four nozzles (symmetrical and asymmetrical), the proportion of dead zone, average turbulent kinetic energy, and mixing time, the results show that asymmetrical bottom blowing is better than symmetrical bottom blowing, and the effect of double nozzles bottom blowing was better than that of four nozzles bottom blowing. The mixing effect is the worst under the condition of single nozzle. When the bottom blowing is asymmetrical with double nozzles, the mixing time is the shortest. Under the condition of double nozzles asymmetrical bottom blowing, when the insertion angle and depth of side lance are larger and deeper, the velocity streamline of molten slag layer is denser and the value is larger; meanwhile, the reflux of molten iron layer is larger, the proportion of dead zone is smaller, and the whole molten pool is fully stirred. When the insertion depth of the side lance is deeper, the gas holdup in the molten pool is greater and the stirring of the molten pool is more intense, while the insertion angle has little effect on the gas holdup. By comparing the influence of different side blowing conditions on the slag layer, it is found that the slag layer is divided into two layers by double-layer side lance, with the critical surface of the slag layer at about 200–260 mm from the bottom, and the insertion depth of the lower side lance has a greater influence on the layering of the slag.

Demystifying the Mushroom Formation Mechanism in BOF Steelmaking Using Physical Modeling Approach and Plant Trial

Mathematical Modeling on the Multiphase Flow during Top–Bottom Combined Blowing Basic Oxygen Furnace Steelmaking Process

Effect of bottom stirring on bath mixing and transfer behavior during scrap melting in BOF steelmaking: A review

Dynamic Model of Basic Oxygen Steelmaking Process Based on Multizone Reaction Kinetics: Modeling of Manganese Removal

Numerical Simulation of Bottom-Blowing Stirring in Different Smelting Stages of Electric Arc Furnace Steelmaking

Numerical Simulation of the Interaction Between Supersonic Oxygen Jets and Molten Slag–Metal Bath in Steelmaking BOF Process

Numerical Investigation of the Limit of Coke Rate Reduction in an Ironmaking Blast Furnace (BF)

Global Droplet Heat Transfer in Oxygen Steelmaking Process

Effect of Mold Electromagnetic Stirring Position on Flow Field and Solidification Behavior of Four‐Hole Nozzle Arc Continuous Casting Large Round Bloom

Numerical Investigation on Role of Bottom Gas Stirring in Controlling Thermal Stratification in Steel Ladles

Numerical Simulation of Multiphase Flow in Ironmaking Process for Oxygen-Rich Side-Blown Bath Smelting Furnace

Three-Dimensional Modeling of an Ironmaking Blast Furnace with a Layered Cohesive Zone

A Robust Static Model of Basic Oxygen Furnace for Analyzing Emerging Steelmaking Scenarios

Numerical simulation of flow characteristics of side-bottom combined blowing in iron bath reactor

Physical Simulation Study on Flow Field Characteristics of Molten Steel in 70t Ladle Bottom Argon Blowing Process

Physical Simulation and Industrial Testing of Bottom-Blown O2-CaO Converter for Steelmaking Process

Solid Flow in an Experimental Oxygen Blast Furnace Model: Effects of Recycled Gas and Raceway

Investigation of Solidification, Heat Transfer and Fluid Flow in Continuous Casting of Steel Using an Advanced Modeling Approach

Simulation of the Flow-Heat Transfer Process in Billet Mold and Analysis of the Billet Rhomboidity Phenomenon

Optimization of Process Parameters for 40Cr Steel Continuous Casting Round Bloom with Pulsed Magneto‐Oscillation Treatment