Abstract:Lithium-rich transition metal oxides are considered a promising cathodic solutions in Li-ion batteries to meet the growing energetic demand, thanks to their high specific capacity and operational voltage [1-2]. Li-rich layered materials have a general stoichiometry Li1+xTM1-xO2, in which TM is a blend of transition metals, as Ni, Mn, Co [2]. They stand out due to their high lithium concentration and specific capacity [1-2]. The higher capacity of Lithium-Rich can be attributed to the specific anionic redox reaction in the bulk at above 4.5 V. Nevertheless, large irreversible capacity loss in the first cycle, poor rate capability, mean working potential decay upon cycling and cobalt content are still major drawbacks that are hindering commercialization. In order to make these materials up scalable to industrial production, it is important to consider the reduction of costs and the toxicity of raw materials, in particular cobalt. Cobalt reduction has been identified as major driver to improve the environmental benignity of batteries and the sustainability of the overall production-consumption-recycling lifecycle. Several efforts to reduce these problems have been made, including the development of different synthetic strategies, doping and surface modification. The most, widely explored, chemical strategy to mitigate the voltage decay and structural degradation in Lithium Rich cathodes is the doping. Elemental doping can be divided into cation and anion doping. As an example, incorporation of redox inactive metals, such as Al, Zr, Ti, has been proposed in order to stabilize the lattice as well as the partial replacement of lithium ions with other alkali cations, e.g. K and Na; or doping the oxygen anion sublattice. In this communication, we present our doping approaches. In particular, the simultaneous replacement of cobalt in the layered structure with aluminum and lithium (over-lithiation). Moreover, we present over-lithiated Co-free materials where the introduction of different amount of iron has been investigated. The characterization of these novel layered materials is reported in terms of composition, structure, morphology and electrochemical performances. These approaches can be applied as a strategy to mitigate the voltage decay and reduce the Cobalt content. [1] Ji, X. et al. Journal of Power Sources 487, (2021). [2] Zhao, S. et al. Angewandte Chemie - International Edition 60, 2208–2220 (2021).

Rational design of dual-ion doped cobalt-free Li-rich cathode materials for enhanced cycle stability of lithium-ion pouch cell batteries

Mitigation of Cation Mixing of LiNiO2-based Cathode Materials by Li-doping for High-Performing Lithium-Ion Battery

Heightening the long cycling stability and reducing oxygen loss of Li-rich cathode materials by Mo–F Co-doping for half/full lithium-ion batteries

Cation and anion Co-doping synergy to improve structural stability of Li-and Mn-rich layered cathode materials for lithium-ion batteries

Achieving high structure and voltage stability in cobalt-free Li-rich layered oxide cathodes via selective dual-cation doping

Towards Rational Design of High Performance Ni-rich Layered Oxide Cathodes: the Interplay of Borate-Doping and Excess Lithium

Synergistic effect of uniform lattice cation/anion doping to improve structural and electrochemical performance stability for Li-rich cathode materials

Dual-site lattice co-doping strategy regulated crystal-structure and microstructure for enhanced cycling stability of Co-free Ni-rich layered cathode

Doping Strategy to Improve the Electrochemical Behavior of Lithium Rich Transition Metal Oxides As Cathodes for Lithium-Ion Batteries

Durable lithium-ion insertion/extraction and migration behavior of LiF-encapsulated cobalt-free lithium-rich manganese-based layered oxide cathode

Suppressing capacity fading and voltage decay of Ni-rich cathode material by dual-ion doping for lithium-ion batteries

Simultaneous dual modification of Li-rich Mn-based cathode in restraining oxygen release and structure distortion

Surface Design with Cation and Anion Dual Gradient Stabilizes High‐Voltage LiCoO2

Surface Design with Cation and Anion Dual Gradient Stabilizes High-Voltage LiCoO<sub>2</sub>

Designing In-Situ-Formed Interphases Enables Highly Reversible Cobalt-Free LiNiO2 Cathode for Li-ion and Li-metal Batteries

Stabilizing Ni‐Rich LiNi 0.92 Co 0.06 Al 0.02 O 2 Cathodes by Boracic Polyanion and Tungsten Cation Co‐Doping for High‐Energy Lithium‐Ion Batteries

Enabling Long‐Term Cycling Stability Within Layered Li‐Rich Cathode Materials by O2/O3‐Type Biphasic Design Strategy

Dual-Element-Modified Single-Crystal LiNi0.6Co0.2Mn0.2O2 As a Highly Stable Cathode for Lithium-Ion Batteries.

Lattice Oxygen Redox Reversibility Modulation in Enhancing the Cycling Stability of Li‐Rich Cathode Materials

Dual-functional boron-modification on a cobalt-free single-crystal layered cathode for high-voltage lithium-ion batteries

In Situ Surface Coating and Oxygen Vacancy Dual Strategy Endowing a Li-Rich Li 1.2 Mn 0.55 Ni 0.11 Co 0.14 O 2 Cathode with Superior Lithium Storage Performance