Radioimmunoassay of cortisol in saliva with the "GammaCoat" kit.

A. Silver,J. Landon,D. S. Smith,L. Perry

DOI: https://doi.org/10.1093/CLINCHEM/29.10.1869

IF: 12.114

1983-10-01

Clinical Chemistry

Abstract:

What problem does this paper attempt to address?

Lightweight, breathable and self-cleaning polypyrrole-modified multifunctional cotton fabric for flexible electromagnetic interference shielding

Lingsai Meng,Yu Ma,Yupeng Zou,Bozhao Zhang,Gang Chen,Chengjun Dong,Lihong Wang,Hongtao Guan

DOI: https://doi.org/10.1016/j.ijbiomac.2024.133347

Abstract:The thriving of wearable electronics and the emerging new requirements for electromagnetic interference (EMI) shielding have driven the innovation of EMI shielding materials towards lightweight, wearability and multifunctionality. Herein, the hierarchical polypyrrole nanotubes (PNTs)/PDMS structures are rationally constructed on the textile for obtaining multifunctional and flexible EMI shielding textiles by in-situ polymerization and surface coating. The modified cotton fabric possesses a conductivity of about 2715.8 S/m and an SET of 28.2 dB in the X band when the thickness is only 0.5 mm. After ultrasonic treatment, cyclic bending and washing, the conductivity and EMI shielding performance remain stable and exhibit long-term durability. Importantly, the textile's inherent lightweight, breathable and soft properties have been completely retained after modification. This work shows application potentiality in the field of EMI pollution protection and affords a novel path for the construction of multifunctionally wearable and durable EMI shielding materials.
Multifunctional Hydrophobic MXene-Coated Cotton Fabrics for Electro/Photothermal Conversion, Electromagnetic Interference Shielding, and Pressure Sensing

Tianyi Zhang,Baiqing Song,XinFeng Li,Kaili Yang,Jie Yang,Guangming Tian,Jianhua Ma

DOI: https://doi.org/10.1021/acsapm.3c00922

2023-08-01

ACS Applied Polymer Materials

Abstract:MXene is a two-dimensional material for preparing wearable electronic textiles. However, maintaining the conductivity, stability, and comfort of MXene-based functional textiles in humid air or water is a key challenge. In this work, the active adsorption sites on cotton fabric surfaces were increased by low-temperature micro-dissolution. It also enhances the bonding ability of MXene with cotton fabrics by using polydopamine (PDA) as an interface agent. Finally, 1H,1H,2H,2H-perfluorooctyltriethoxysilane (PFOTES) was impregnated on the surface of the cotton fabric modified by MXene, which effectively avoided the oxidation of MXene while imparting good hydrophobic properties to the fabric. The composite conductive fabric shows excellent electro/photothermal performance. Driven by low voltage, the surface temperature of the fabric can reach 140 °C within 30 s. After 20 s of irradiation by a 250 W infrared lamp, the surface of the fabric can rapidly warm to 110 °C. The fabric shows excellent EMI shielding performance, with an EMI shielding effect of 32 dB at 8–12 GHz. In addition, the fabric exhibits good sensing stability and fast response and recovery in stress sensing. This material has a simple preparation process, diverse functional characteristics, and great potential in the next generation of intelligent wearable electronic products.

polymer science,materials science, multidisciplinary
Multifunctional electromagnetic interference shielding composite fabrics with simultaneous high-efficiency photothermal conversion and Joule heating performance

Zhao Yuhang,Zhicai Yu,Hualing He,Huizhen Ke

DOI: https://doi.org/10.1108/prt-05-2022-0069

2022-08-14

Abstract:Purpose This study aims to fabricate a multifunctional electromagnetic interference (EMI) shielding composite fabric with simultaneous high-efficiency photothermal conversion and Joule heating performances. Design/methodology/approach A multifunctional polypyrrole (PPy) hydrogel/multiwalled carbon nanotube (MWCNT)/cotton EMI shielding composite fabric (hereafter denoted as PHMC) was prepared by loading MWCNT onto tannin-treated cotton fabric, followed by in situ crosslinking-polymerization to synthesize three-dimensional (3D) conductive networked PPy hydrogel on the surface of MWCNT-coated cotton fabric. Findings Benefiting from the unique interconnected 3D networked conductive structure of PPy hydrogel, the obtained PHMC exhibited a high EMI-shielding effectiveness vale of 48 dB (the absorbing electromagnetic wave accounted for 84%) within a large frequency range (8.2–12.4 GHz). Moreover, the temperature of the laminated fabric reached 54°C within 900 s under 15 V, and it required more than 100 s to return to room temperature (28.7°C). When the light intensity was adjusted to 150 mW/cm 2 , the PHMC temperature was about 38.2°C after lighting for 900 s, indicating high-efficiency electro-photothermal effect function. Originality/value This paper provides a novel strategy for designing a type of multifunctional EMI shielding composite fabric with great promise for wearable smart garments, EMI shielding and personal heating applications.

engineering, chemical,materials science, coatings & films,chemistry, applied
Construction of ‘wire-surface’ conductive networks on cotton fabric for electromagnetic interference shielding, personal thermal management and infrared thermal camouflage

Biaobiao Yan,Yilei Gao,Bingjie Fan,Man Zhou,Ying Liu,Yuanyuan Yu,Bo Xu,Qiang Wang,Ping Wang

DOI: https://doi.org/10.1007/s10570-023-05597-8

IF: 6.123

2023-11-10

Cellulose

Abstract:Although textiles decorated with electroactive materials have gained significant development in the field of wearable electronics and portable devices, the main issue is how to better exploit the synergy between conductive media for multi-scenario applications. Herein, we constructed a conductive network of 1D CNTs and 2D gallic acid-modified MXene (MG) alternating assembly of ‘wire-surface’ structure on the cotton fabric surface for wearable multifunctional personal protection. The introduction of gallic acid extended the lateral dimensions of MXene nanosheets, and the presence of CNTs protected MXene from oxidation and improved the binding of nanosheets to cotton fabric, contributing to an enhancement of the conductivity of the assembled fabric. Meanwhile, the conductivity of the assembled fabric remains stable after cyclic bending (1000 cycles) and nature storage (60 days). The assembled fabric could achieve more than 35 dB of electromagnetic interference shielding effectiveness (X-band) and outstanding infrared thermal camouflage performance. Moreover, low-radiation, Joule and solar heating are integrated to respond to the heating needs of complex scenarios and to achieve efficient utilization of energy. Based on its simple and scalable fabrication process, along with durability and comfort, the assembled cotton is expected to be promising candidates for multifunctional personal protective fabric.

materials science, textiles,polymer science, paper & wood
Hydrophobic wrapped carbon nanotubes coated cotton fabric for electrical heating and electromagnetic interference shielding

Jianhua Ma,Qiangli Zhao,Yingxue Zhou,Pengxin He,Haihong Pu,Baiqing Song,Shaoxue Pan,Yaowu Wang,Chen Wang

DOI: https://doi.org/10.1016/j.polymertesting.2021.107240

IF: 5.1

2021-08-01

Polymer Testing

Abstract:Load conductive component onto textiles via coating method is a simple and facile fabrication process to prepare flexible smart wearable device. However, this functional textile will suffer a significant damage after washing or mechanical wear, which hindered its application. In this study, polydopamine (PDA) was used as an interfacial agent to enhance the combination between carbon nanotubes (CNTs) and cotton fiber to fabricated a highly conductive fabric. Furthermore, a hydrophobic material 1H,1H,2H,2H-perfluorooctyltriethoxysilane (PFOTES) was introduced to the conductive fabric via dip-coating process, which effectively fixed the CNTs and simultaneously realize the water resistance of the composite fabric, as the contact angle for the fabric was up to 138o. Owning to the formation of a stable conductive path, the composite conductive fabric always possessed a surface resistance lower than 110 Ω/sq. Even after going through the repeated mechanical deformation or multiple stripping cycles, this conductive pathway of the composite fabric was still well maintained. Benefit from the excellent stability and high electrical conductivity, this fabric shows an attractive electromagnetic (EMI) shielding performance, as its EMI shielding effectiveness was 22 dB under 6.57-9.99 GHz and 23 dB under 11.9-18 GHz. Furthermore, the fabric exhibited an outstanding electric heating performance with the heating temperature reaches more than 85 °C at 6 V. Along with the facile preparation technique and stable functional performance, we expect that this hydrophobic conductive cotton fabric can be used as wearable electronics and for the design of various smart flexible devices.

materials science, characterization & testing,polymer science
Multifunctional polypyrrole and rose-like silver flower-decorated E-textile with outstanding pressure/strain sensing and energy storage performance

Jingchun Lv,Zeng Liu,Long Zhang,Kaikai Li,Shaohui Zhang,Hong Xu,Zhiping Mao,Haifeng Zhang,Jiafan Chen,Gebo Pan

DOI: https://doi.org/10.1016/j.cej.2021.130823

IF: 15.1

2022-01-01

Chemical Engineering Journal

Abstract:Textile-based wearable devices have attracted much attention as they can improve the wearing comfort and safety of electronic products. This paper proposes a fabrication strategy for a multifunctional e-textile based on polypyrrole (PPy) and rose-like silver flower-decorated knitted cotton/spandex fabric (KCSF). The rose-like silver flower grown on the PPy surface by electrodeposition can further improve the surface roughness and pressure sensitivity of the fabric. PPy and rose-like silver flower-decorated KCSF can be used to construct a multi-layer pressure/strain sensor. The as-obtained sensor not only exhibits an ultra-wide working pressure range (0–900 kPa), but also achieves a high sensitivity (17.41 kPa−1 for low-pressure areas), which effectively balances the operating range and sensitivity. More importantly, the sensor can be used to accurately monitor different physiological signals, including the levels of swallowing, breathing rate, voice recognition, and sleep quality. In addition, an all-solid-state supercapacitor is fabricated using PPy-coated fabric electrodes, demonstrating a high areal capacitance of 978.9 mF cm−2 at 1 mA cm−2, an energy density of 80.3 µWh cm−2, and power density of 0.38 mW cm−2. The multifunctional e-textile with excellent sensing and energy storage behaviors is simple and easy to manufacture, with potential application prospects in the broad field of wearable technology.

engineering, chemical, environmental
Multilayer Joule Heating and Electromagnetic Interference Shielding Composite Fabric with High Interfacial Durability

Bibo Wang,Pengfei Jia,Ruofan He,Lei Song,Yuan Hu

DOI: https://doi.org/10.1016/j.jcis.2022.11.157

IF: 9.9

2023-01-01

Journal of Colloid and Interface Science

Abstract:High-performance modern integrated intelligent wearable electronic textiles show excellent joule heat-ing performance, electromagnetic interference shielding (EMI) and fire safety. In this work, cotton fabric as a biomass material is used as the framework. Due to its strong electrostatic interaction and hydrogen bonding, 3 aminopropyl trethoxy silane (KH550) layer, silver nanowire (AgNW) conductive network and water-based polyurethane (WPU) protective layer are formed on the surface of cotton fiber for fabricating composite fabric (AgNW-10-W). Due to the perfect collaborative conductive network and porous fiber network structure, AgNW-10-W shows excellent EMI shielding effectiveness (53.9 dB, 1.3 mm thickness). Furthermore, the surface temperature of the joule heating composite fabric with AgNW as the conductive raw material can reach over 100 degrees C at an applied voltage of 2 V. Meantime, the composite fabric also shows good cycling and long-term joule heating performance. In the wear tests, the AgNW-10-W cotton fabric has good bending resistance and salt water resistance. It produces heat evenly on the human body's wrist joint and has a certain wear function. In the combustion performance test, the pHRR of AgNW-10-W cotton fabric was 31.3 % lower than that of pure cotton fabric. The work demonstrates the appeal of high-performance multifunctional electronic textiles for joule heating, electromagnetic shielding, and fire safety applications in AI and emerging wearable electronics.(c) 2022 Elsevier Inc. All rights reserved.
A Durable Textile With Advanced Thermal Functions and Electromagnetic Shielding

Dangge Gao,Zhangting Jia,Bin Lyu,Litao Tang,Yatong Fu,Jianzhong Ma

DOI: https://doi.org/10.1002/smll.202407571

IF: 13.3

2024-10-26

Small

Abstract:A novel personal thermal management textile with energy‐free PRH, energy‐saving solar heating, compensatory Joule heating, and electromagnetic interference (EMI) shielding is proposed by simply sequentially growing polydopamine and silver nanoparticles on the cotton fabric. The personal thermal management textile exhibits terrific durability, and tunable heating mode, which ensures the long‐term, multi‐scene, and wide temperature ranges thermal comfort demands. In the face of increasingly variable cold climates and diverse individual temperature regulation demands, personal thermal management (PTM) textiles with electromagnetic shielding have obtained significant attention. However, the PTM textiles face several challenges, including single heating mode, insufficient durability, and complex preparation processes. Herein, an all‐day PTM textile Cotton@PDA/AgNPs (CPANS) with energy‐free PRH, energy‐saving solar heating, compensatory electrical heating, electromagnetic interference (EMI) shielding, and outstanding durability is fabricated by sequentially growing polydopamine (PDA) and silver nanoparticles (AgNPs) on the cotton fabric (CF). The CPANS exhibits low mid‐infrared emissivity (36.6%) and high absorptivity (70.8%), which guarantees the energy‐saving heating capability. Moreover, the conductivity of the CPANS is ≈11109 S m−1, enabling an electrical heating temperature of ≈177 °C under a low voltage of 1.1 V and superb EMI shielding effectiveness (≈60 dB). The remarkable adhesive properties of the PDA ensure that the desired durability of the CPANS remains high even after rigorous physical treatments. This innovation shows enormous potential for wearable integrated garments in the future and offers a new ideal for PTM fabrics in the cold.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Advancement in cellulose-based multifunctional high conductive PNIPAAm/PPy hydrogel/cotton composites for EMI shielding

Zhicai Yu,Yuhang Zhao,Jinru Liu,Yushu Wang,Yi Qin,Zhenyu Zhu,Cong Wu,Jiacheng Peng,Hualing He

DOI: https://doi.org/10.1007/s10570-022-04698-0

IF: 6.123

2022-07-17

Cellulose

Abstract:Exploitation of cotton fabric as electromagnetic interference (EMI) shielding substrates have attracted a growing interest due to their desirable low carbon footprint, economic feasibility, and sustainability. Herein, a facile strategy was proposed for preparing a cellulose-based multifunctional PNIPAAm/PPy hydrogel/cotton (PPHC) EMI shielding composites with simultaneous high-efficient electro-photo-thermal conversion and comfort regulation functions. The PPHC was fabricated via in situ polymerization conductive PPy hydrogel on cotton substrate followed by deposition of PNIPAAm. Benefiting from the unique interconnected three-dimensional networked conductive structure of PPy hydrogel, the obtained PPHC composites exhibited high conductivity (15 mS/cm), and EMI shielding effectiveness (EMI SE ~ 40 dB) in the frequency of 8.2–12.3 GHz. Moreover, the PNIPAAm coating endowed the composite fabrics with adjustable wettability performance in response to external temperature, leading to excellent comfort regulation performance. This work provided feasible avenue toward low cost and sustainability cotton-based EMI shielding composites with efficient EMI shielding and comfort regulation performance.

materials science, textiles,polymer science, paper & wood
Synthesis of MXene-based nanocomposite electrode supported by PEDOT:PSS-modified cotton fabric for high-performance wearable supercapacitor

Xiaohong Liu,Yudong Chen,Huangqing Zhang,Leilin Zhuo,Qingwei Huang,Wengong Zhang,Hong Chen,Qidan Ling

DOI: https://doi.org/10.1016/j.jcis.2024.01.084

IF: 9.9

2024-01-26

Journal of Colloid and Interface Science

Abstract:The rapid development of wearable and portable electronic devices prompts the ever-growing demand for wearable, flexible, and light-weight power sources. In this work, a MXene/GNS/PPy@PEDOT/Cotton nanocomposite electrode with excellent electrochemical performances was fabricated using cotton fabric as a substrate. Poly (3,4-ethylenedioxythiophene): poly (styrenesulfonate) (PEDOT:PSS) was coated on the cotton fabric to obtain a conductive substrate through a controllable dip-drying coating process, while a nanocomposite consisting of MXene, Graphene nanoscroll (GNS), and polypyrrole (PPy) was directly synthesized and deposited on the PEDOT:PSS-modified cotton fabric via a one-step in situ polymerization method. The resultant MXene/GNS/PPy@PEDOT/Cotton electrode delivers excellent electrochemical performances including an ultra-high areal capacitance of 4877.2 mF·cm −2 and stable cycling stability with 90 % capacitance retention after 3000 cycles. Moreover, the flexible symmetrical supercapacitor (FSC) assembled with the MXene/GNS/PPy@PEDOT/Cotton electrodes demonstrates a prominent areal capacitance (2685.28 mF·cm −2 at a current density of 1 mA·cm −2 ) and a high energy density (322.15 μWh·cm −2 at a power density of 0.46 mW·cm −2 ). In addition, the application of the FSC for wearable electronic devices was demonstrated.

chemistry, physical
Air-permeable and Flexible Multifunctional Cellulose-based Textiles for Bio-protection, Thermal Heating Conversion, and Electromagnetic Interference Shielding

Zhaochuan Yu,Chao Deng,Farzad Seidi,Qiang Yong,Zhichao Lou,Liucheng Meng,Jiawei Liu,Chen Huang,Yuqian Liu,Weibing Wu,Jingquan Han,Huining Xiao

DOI: https://doi.org/10.1039/d2ta04706c

IF: 11.9

2022-07-26

Journal of Materials Chemistry A

Abstract:Air-permeable and flexible multifunctional textiles are highly desired for wearable electronics and portable device applications. However, fabricating textiles with novel multifunctionalities while maintaining their inherent porous and flexible characteristics still remains a challenge. Herein, a range of organic-inorganic hybrid materials were prepared via a surface engineering approach in an attempt to create air-permeable and flexible multifunctional cellulose-based textiles with superb bactericidal activities, thermal heating conversion, and electromagnetic interference (EMI) shielding performances. The highly conductive MXene was decorated onto the polydopamine (PDA) modified cellulose nonwovens, followed by in-situ polymerization of glycidyl methacrylate (GMA). The resultant PGMA facilitated the covalently grafting of disinfecting agents and also protected the MXene from oxidation. The disinfecting agents, i.e., neomycin sulfate or guanidine-based polymer, rendered the textiles highly biocidal. The smart textile possesses excellent bactericidal efficacy of > 99.99% against both E. coli and S. aureus, exceptional heating performance (dual-driven energy conversion, fast thermal response, and wide temperature range), and outstanding EMI shielding efficiency of 38.6 dB in the X-band, while maintaining the satisfactory porosity and flexibility of green-based nonwovens. Evidently, such wearable multifunctional textiles are extremely promising for applications in bio-protection, thermal management, and EMI shielding, and are ideal candidates for future intelligent garments and healthcare devices.

materials science, multidisciplinary,chemistry, physical,energy & fuels
[CD4 lymphocytes as targets and actors in the pathogenesis of HIV infection--therapeutic implications].

J. Thèze

Abstract:CD4 T lymphocytes play a central role in the pathogenesis of human immunodeficiency virus (HIV) infection. In viremic patients, these cells are direct targets for the virus: HIV multiplies intensely in this subpopulation during the acute phase of the disease and continues to propagate in these same cells during the clinical latency phase. Uninfected CD4 T lymphocytes are also indirectly affected during this second phase: they are activated, become anergic, then disappear by apoptosis, ultimately contributing to CD4 lymphopenia. Our studies have shown that dysfunction of the interleukin-2 system and its receptors largely explain the early immune deficiency seen in viremic patients. Later, blockade of the homeostatic interleukin-7/CD4 loop contributes to rendering this CD4 lymphopenia irreversible. Our studies suggest that the inflammatory reaction which accompanies this infection gives rise to a state of abnormal activation, with receptor desensitization to the main cytokines regulating CD4 lymphocyte functions and numbers. In the few rare patients who manage to control HIV in the absence of any treatment, the CD4 T cell compartment has a very characteristic configuration. We have shown that an extensive subpopulation of "central memory" CD4 T lymphocytes expresses large quantities of the CCR7 homing receptor and that this helps drive these lymphocytes to infected lymph nodes. Also, these "central memory" CD4 T lymphocytes produce large quantities of IL-2, that they use in an autocrine manner, stimulating their self-renewal and ensuring their long-term survival. Our studies have opened the door to cytokine-based immunotherapy and to the development of new drug- and vaccine-based strategies.
Thermo‐Chemo‐Mechanically Robust, Multifunctional MXene/PVA/PAA‐Hanji Textile with Energy Harvesting, EMI Shielding, Flame‐Retardant, and Joule Heating Capabilities

Jiheon Kim,Yong Choi,Hoyoung Jang,Sohyung Jiong,Xinqi Chen,Byungseok Seo,Wonjoon Choi

DOI: https://doi.org/10.1002/adma.202411248

IF: 29.4

2024-10-05

Advanced Materials

Abstract:MXene/PVA/PAA‐Hanji (MPP‐H) composites are devised as multifunctional textiles. Energy harvesting function generates electrical power using human sweat and environmental humidity, while asymmetric features of MPP‐H textiles enable superior electromagnetic interference shielding through absorption‐driven mechanisms. Thermo‐chemo‐mechanical robustness of the MPP‐H is demonstrated by superior flame resistance to protect the human body, rapid Joule heating capability for thermoregulation, and high durability with flexibility and washability. The rapid development of wearable electronics, personal mobile equipment, and Internet of Things systems demands smart textiles that integrate multiple functions with enhanced durability. Herein, the study reports robust and multifunctional textiles with energy harvesting, electromagnetic interference (EMI) shielding, flame resistance, and Joule heating capabilities, fabricated by a facile yet effective integration method using the deposition of cross‐linked MXene (Ti3C2Tx), poly(vinyl alcohol) (PVA), and poly(acrylic acid) (PAA) onto traditional Korean paper, Hanji via vacuum filtration. Comprehensive analyses confirm robust cross‐linking, structural integrity, and interface stability in the MXene/PVA/PAA‐Hanji (MPP‐H) textiles, which synergistically boost their multifunctional performance. The MPP‐H textiles exhibit remarkable power generation lasting over 60 min with a power density of 102.2 μW cm−3 and an energy density of 31.0 mWh cm−3 upon the application of 20 μL of NaCl solution. The EMI shielding effectiveness (SE) per unit thickness in the X‐band (8.2–12.4 GHz) is up to 437.6 dB mm−1, with the ratio of absorption to reflection reaching 4.5, outperforming existing EMI shielding materials. Superior thermo‐chemo‐mechanical properties (flame resistance, rapid Joule heating, durability, and washability) further demonstrate their versatile usability. The MPP‐H enables diverse functionalities within a single, robust textile through a scalable fabrication method, offering transformative potential for wearable and mobility platforms.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Multifunctional Electromagnetic Interference Shielding Ternary Alloy (Ni–W–P) Decorated Fabric with Wide-Operating-Range Joule Heating Performances

Yu Bai,Feng Qin,Yinxiang Lu

DOI: https://doi.org/10.1021/acsami.0c15134

2020-10-12

Abstract:Flexible electromagnetic interference (EMI) shielding textiles with wide-operating-range Joule heating performances are urgently indispensable in the application of artificial intelligence, communication industry, and wearable electronics. Herein, a simple and cost-effective approach is proposed to construct multifunctional textiles by electroless depositing a nickel–tungsten–phosphorus (Ni–W–P) ternary alloy on a polyamide (PA) fabric. The resultant fabric with a thickness of ∼117 μm exhibits a favorable EMI shielding effectiveness (SE) of 43.6 dB within 2–12.5 GHz. Particularly, finite difference time domain (FDTD) simulation was introduced to investigate the effects of the PA fabric mesh number and Ni–W ratio on the EMI SE value, which was validated by experimental results. In addition, the conductive fabric demonstrates excellent heating efficiency (up to 140 °C under 2 V within 60 s), a wide operating range (from 40 to 140 °C), and simultaneously, satisfactory reproducibility by undergoing dozens of heating and cooling cycles. Notably, EMI SE of the multifunctional fabric remains unchanged even after a series of durability measurements including 180 °C heating, ultrasonication treatment, and repetitive peeling tests, respectively. Therefore, the prepared Ni–W–P coated PA fabric with prominent chemical stability and mechanical robustness endows enormous potential in multi-scene applications.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c15134?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c15134</a>.Electroless nickel plating laboratory process; parameters employed in simulation of the Ni–W–P-N3 coated PA-5 fabric; experimental platform for high-temperature resistance measurement; EDX analysis and elemental composition for the Ni–W–P-N3 coated PA-5 fabric; FTIR spectra of the PA fabric and PA-NH2 fabric; XPS spectra of W 4f, P 2p, and P loss; XPS spectra of N 1s from the PA-NH2 fabric and Ni–W–P-N3 coated PA-5 fabric; digital image of the Ni–W–P-N3 coated PA-3 fabric and the unit for Ni–W–P-N3 coated PA-3 fabric; magnetic hysteresis loops for the Ni–W–P-N3 coated PA-3 fabric sample; two-dimensional electric field intensity distribution profiles; EMI SEs of the Ni–W–P-Nx coated PA-5 fabric at frequencies of 4 and 10 GHz; digital photograph of the real-time monitoring platform; digital diagrams of the three fabrics at different temperatures; schematic image of the Scotch tape test for the ternary alloy coated flexible conductive fabric; XPS atomic ratio (%) of fabric samples; corrosion current density (Icorr) and corrosion recording potential (Ecorr) of the Ni–W–P-N3 coated PA-5 fabric and single metal Ni coated fabric (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c15134/suppl_file/am0c15134_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

materials science, multidisciplinary,nanoscience & nanotechnology
Interfacing MXene flakes on fiber fabric as an ultrafast electron transport layer for high performance textile electrodes

Xiaolong Li,Junnan Hao,Rong Liu,Hanna He,Yuanming Wang,Gemeng Liang,Yang Liu,Guohui Yuan,Zaiping Guo

DOI: https://doi.org/10.1016/j.ensm.2020.05.004

IF: 20.4

2020-12-01

Energy Storage Materials

Abstract:Highly flexible and compliant textile-based electrodes are of considerable interest for the next generation of wearable devices. Engineering interconnected electron transport channels in the insulating textile substrate without any detriment to its intrinsic porous structure, flexibility, and stability generally is a great challenge in developing the high-performance devices. Herein, a strategy to prepare a highly conductive textile by electrostatic self-assembly between positively charged polyester fabric modified with polyethyleneimine (PEI) and negatively charged titanium carbide MXene flakes is presented. The densified, horizontally aligned MXene flakes are painted on the fabric fibers with a low mass loading of 0.8 mg cm−2. They not only form intergral layers of conductive skin, which can be easily charged/discharged at 10 V s−1, but also create numerous active sites for further introducing functional electrochemical materials due to the surface chemistry of the MXene. As a proof-of-concept application, the conductive textile is combined with conformally coated polypyrrole (PPy) and used as a supercapacitor electrode, which has demonstrated large areal capacitance, high rate performance, and outstanding cycling stability without compromising its mechanical endurance. These features suggest the great potential of the as-prepared electrodes and open up a new avenue for the development of a new generation of textile electrode for the smart textile industry.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology
A multifunctional wearable E-textile via integrated nanowire-coated fabrics

Yunlu Lian,He Yu,Mingyuan Wang,Xiaonan Yang,Zhe Li,Fan Yang,Yang Wang,Huiling Tai,Yulong Liao,Jieyun Wu,Xiangru Wang,Yadong Jiang,Guangming Tao

DOI: https://doi.org/10.1039/d0tc00372g

IF: 6.4

2020-01-01

Journal of Materials Chemistry C

Abstract:We demonstrate a novel multifunctional E-textile which functions as a pressure sensor, Joule heater, thermal insulator, and PM2.5 filter.

materials science, multidisciplinary,physics, applied
A Scalable and Robust Personal Health Management Textile with Multiple Desired Thermal Functions and Electromagnetic Shielding

Litao Tang,Bin Lyu,Dangge Gao,Yingying Zhou,Yunchuan Wang,Fangxing Wang,Zhangting Jia,Yatong Fu,Ken Chen,Jianzhong Ma

DOI: https://doi.org/10.1002/advs.202400687

IF: 15.1

2024-04-24

Advanced Science

Abstract:A novel Personal Health Management textile is proposed by integrating electrical heating, radiative heating, EMI shielding, and piezoresistive sensing performance onto a cotton fabric, which is achieved through an uncomplicated screen‐printing process using silver paste. The development of functional textiles combining conventional apparel with advanced technologies for personal health management (PHM) has garnered widespread attention. However, the current PHM textiles often achieve multifunctionality by stacking functional modules, leading to poor durability and scalability. Herein, a scalable and robust PHM textile is designed by integrating electrical, radiative, and solar heating, electromagnetic interference (EMI) shielding, and piezoresistive sensing performance onto cotton fabric. This is achieved through an uncomplicated screen‐printing process using silver paste. The conductivity of the PHM textile is ≈1.6 × 104 S m−1, ensuring an electric heating temperature of ≈134 °C with a low voltage of 1.7 V, as well as an EMI shielding effectiveness of ≈56 dB, and human motion monitoring performance. Surprisingly, the radiative/solar heating capability of the PHM textile surpasses that of traditional warm leather. Even after undergoing rigorous physical and chemical treatments, the PHM textile maintains terrific durability. Additionally, the PHM textile possesses maneuverable scalability and comfortable wearability. This innovative work opens up new avenues for the strategic design of PHM textiles and provides an advantageous guarantee of mass production.

materials science, multidisciplinary,nanoscience & nanotechnology,chemistry
A stretchable fabric as strain sensor integrating electromagnetic shielding and electrochemical energy storage

Xu Li,Xiaohui Sun,Jiuyue Zhang,Song Xue,Linjie Zhi

DOI: https://doi.org/10.1007/s12274-023-6150-8

IF: 9.9

2023-10-01

Nano Research

Abstract:Multifunctional intelligent fabric plays an integral role in health management, human–machine interaction, wireless energy storage and conversion, and many other artificial intelligence fields. Herein, we demonstrate a newly developed MXene/polyaniline (PANI) multifunctional fabric integrated with strain sensing, electrochemical energy storage, and electromagnetic shielding properties. The multifunctional fabric-based strain sensor possesses a real-time signal response at a sizeable tensile strain of 100% with a minute strain of 0.5%, maintaining a stable and consistent signal response even after 3000 stretch–release cycles. In addition, the multifunctional fabric exhibits excellent electromagnetic shielding capabilities, achieving a total shielding effectiveness value of up to 43 dB, and in the meantime shows attractive electrochemical energy storage performance as an electrode in a supercapacitor, offering a maximum specific capacity and energy density of 522.5 mF·cm −2 and 18.16 μWh·cm −2 , respectively. Such a multifunctional intelligent fabric offers versatile opportunities to develop smart clothes for various artificial intelligent applications.

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
Cotton fabric electrodes coated by polydopamine-reduced graphene oxide and polypyrrole for flexible supercapacitors

Yuwei Ma,Didi Mu,Peiwen Zhou,Linping Zhang,Yi Zhong,Xiaofeng Sui,Hong Xu,Zhiping Mao

DOI: https://doi.org/10.1007/s10854-023-11783-y

2024-01-04

Journal of Materials Science Materials in Electronics

Abstract:Highly conductive reduced graphene oxide (rGO) and pseudo-capacitive polypyrrole (PPy) were integrated together to develop a flexible textile electrode for wearable energy storage. The 2D planar cotton-reduced graphene oxide-polydopamine cotton (C-rGO-PDA-PPy) fabric is obtained by designing the reduced graphene oxide-polydopamine cotton (C-rGO-PDA) fabric as a conductive network and then depositing the electrochemical active material PPy. The C-rGO-PDA-PPy fabric electrodes show a superior areal specific capacitance (6650 mF/cm2 at 1 mA/cm2) and outstanding cycling stability. The flexible all-solid-state supercapacitors based on cotton fabric have large areal specific capacitance and excellent cycle stability. Meanwhile the energy density of the device can be as high as 140.44 μWh/cm2 when the power density is 0.37 mW/cm2. This work provides an easy, economical and environmentally friendly way to turn fabrics into wearable electronic textile devices.

engineering, electrical & electronic,materials science, multidisciplinary,physics, condensed matter, applied
A Multifunctional Smart Textile Derived from Merino Wool/Nylon Polymer Nanocomposites as Next Generation Microwave Absorber and Soft Touch Sensor

Sabyasachi Ghosh,B Nitin,Sanjay Remanan,Yudhajit Bhattacharjee,Arup Ghorai,Tamal Dey,Tushar Kanti Das,Narayan Ch Das

DOI: https://doi.org/10.1021/acsami.0c02566

2020-04-15

Abstract:In recent times e-textiles have emerged as wonder safeguards due to the great potential background in space, military, healthcare, or portable electronics. As a result, widespread research and development have been done to make significant advancement in this field, but it still remains a key challenge to use one single product with multifunctional attributes with the past performance of key characteristics. In this work, phase-separated PEDOT:PSS ornamented with reduced graphene oxide (rGO) nanosheets, deposited on the newly fabricated ultralightweight, superhydrophobic, and mechanically enriched merino wool/nylon (W-N) composite textile followed by the dipping and drying strategy. The open edges-layered structure of rGO helping uniform deposition of PEDOTs clusters, which allows the formation of a stacked layer of PEDOTs/rGO-PEDOTs/PEDOTs for robust three-dimensional electrical transforming channel network within the W-N textile surface. These dip-coated multifunctional textiles show high electrical conductivities up to 90.5 S cm-1 conjugated with a flexible electromagnetic interference shielding efficiency of 73.8 dB (in X-band) and in-plane thermal conductivity of 0.81 W/mK with a minimum thickness of 0.84 mm. This thin coating maintained the hydrophobicity (water contact angle of ∼150°) leading to an excellent EM protective cloth combined with real-life antenna performance under high mechanical or chemical tolerance. Interestingly, this multiuse textile can also act as an exceptional TASER Proof Textile (TPT) due to a short out of the electrical shock coming from the TASER by its unique conducting network architecture. Remarkably, this coated textile can get a response by the soft touch to lighten up the household bulb and could establish wireless communication via an HC-05 Bluetooth module as a textile-based touch switch. This developed fabric could perform as a new potentially scalable single product in intelligent smart garments, portable next-generation electronics, and the growing threat of EM pollution.

Radioimmunoassay of cortisol in saliva with the "GammaCoat" kit.

Lightweight, breathable and self-cleaning polypyrrole-modified multifunctional cotton fabric for flexible electromagnetic interference shielding

Multifunctional Hydrophobic MXene-Coated Cotton Fabrics for Electro/Photothermal Conversion, Electromagnetic Interference Shielding, and Pressure Sensing

Multifunctional electromagnetic interference shielding composite fabrics with simultaneous high-efficiency photothermal conversion and Joule heating performance

Construction of ‘wire-surface’ conductive networks on cotton fabric for electromagnetic interference shielding, personal thermal management and infrared thermal camouflage

Hydrophobic wrapped carbon nanotubes coated cotton fabric for electrical heating and electromagnetic interference shielding

Multifunctional polypyrrole and rose-like silver flower-decorated E-textile with outstanding pressure/strain sensing and energy storage performance

Multilayer Joule Heating and Electromagnetic Interference Shielding Composite Fabric with High Interfacial Durability

A Durable Textile With Advanced Thermal Functions and Electromagnetic Shielding

Advancement in cellulose-based multifunctional high conductive PNIPAAm/PPy hydrogel/cotton composites for EMI shielding

Synthesis of MXene-based nanocomposite electrode supported by PEDOT:PSS-modified cotton fabric for high-performance wearable supercapacitor

Air-permeable and Flexible Multifunctional Cellulose-based Textiles for Bio-protection, Thermal Heating Conversion, and Electromagnetic Interference Shielding

[CD4 lymphocytes as targets and actors in the pathogenesis of HIV infection--therapeutic implications].

Thermo‐Chemo‐Mechanically Robust, Multifunctional MXene/PVA/PAA‐Hanji Textile with Energy Harvesting, EMI Shielding, Flame‐Retardant, and Joule Heating Capabilities

Multifunctional Electromagnetic Interference Shielding Ternary Alloy (Ni–W–P) Decorated Fabric with Wide-Operating-Range Joule Heating Performances

Interfacing MXene flakes on fiber fabric as an ultrafast electron transport layer for high performance textile electrodes

A multifunctional wearable E-textile via integrated nanowire-coated fabrics

A Scalable and Robust Personal Health Management Textile with Multiple Desired Thermal Functions and Electromagnetic Shielding

A stretchable fabric as strain sensor integrating electromagnetic shielding and electrochemical energy storage

Cotton fabric electrodes coated by polydopamine-reduced graphene oxide and polypyrrole for flexible supercapacitors

A Multifunctional Smart Textile Derived from Merino Wool/Nylon Polymer Nanocomposites as Next Generation Microwave Absorber and Soft Touch Sensor