Abstract:Wearable electronic devices such as health monitors, sensors, and e‐skin can be powered by lightweight, high‐power supercapacitors. Using a binder‐free and low‐temperature hydrothermal method, polyhedral ZnO nanoparticles were grown on carbon nanotube (CNT)‐decorated cotton fabric, which is friendly to human skin and highly wearable, inexpensive, and thus commercially viable. The concentration of the starting material, zinc acetate, was varied to optimize the electrochemical performance. The evenly spaced polyhedral ZnO facilitated efficient permeation of the electrolyte into the active material. The fabric filaments were decorated with CNTs to enhance electron transfer and the overall electrochemical processes. The symmetric cell comprised of cotton fabric decorated with ZnO polyhedron/CNT showed no discernible change in the cyclic voltammetry curves even after 500 bending cycles, demonstrating the mechanical durability of the electrode. The potential window of 1.6 V using a Na2SO4/K2SO4 aqueous dual‐ion electrolyte improved the long‐term electrochemical stability and increased the energy storage capacity. The capacitance retention was 94% after 5000 cycles at a current density of 1 A·g−1, indicating long‐term electrochemical stability. A specific capacitance of 375 F·g−1 at a current density of 5 A·g−1 and energy density of 33.3 Wh·kg−1 at a power density of 2000 W·kg−1 were recorded for the optimized electrode. Polyhedral ZnO was grown on cotton fabric using a hydrothermal process. The electrochemical performance was optimized by varying the zinc acetate concentration. The highest specific capacitance was 375 F·g−1 at a current density of 5 A·g−1. Under optimal conditions, the capacitance retention was 94% at N = 5000 cycles. The energy density of the electrode was as high as 33.3 Wh·kg−1. The decoration of fabric fibers by zinc oxide polyhedron and carbon nanotube via hydrothermal for use as flexible and lightweight supercapacitor electrodes was demonstrated. The hexagonal structures in a one‐step deposition, without any binder and a metallic current collector increase the specific capacitance and energy density of the overall device. The exceptional stability during long‐term cycling and wide (1.6 V) operating potential were also demonstrated.

Synthesis of MXene-based nanocomposite electrode supported by PEDOT:PSS-modified cotton fabric for high-performance wearable supercapacitor

Polypyrrole–MXene coated textile-based flexible energy storage device

Construction of porous and free-standing film electrodes composed of MXene, carbon nanocoils and PEDOT:PSS for high-performance flexible supercapacitors

A wearable cotton fiber-based supercapacitor electrode material with outstanding stability and photothermal performance utilizing AgNWs, NiCoAl-LDH, and PPy-NWs

Growth of CQD/PPy on cotton cloth as a binder-free high-performance flexible electrode for symmetric supercapacitor

Heteroatoms-doped porous carbon electrodes with three-dimensional self-supporting structure derived from cotton fabric for high-performance wearable supercapacitors

Wearable fabric supercapacitors based on CNTs and polyhedral ZnO with a wide potential window

Cotton fabric electrodes coated by polydopamine-reduced graphene oxide and polypyrrole for flexible supercapacitors

A High-performance Flexible Pseudosupercapacitor Constructed on Conductive Cloth

Enhancement of the Performance Properties of Pure Cotton Fabric by Incorporating Conducting Polymer (PEDOT:PSS) for Flexible and Foldable Electrochemical Applications

Wearable supercapacitor based on polyaniline supported by graphene coated polyester textile

High energy density flexible Zn-ion hybrid supercapacitors with conductive cotton fabric constructed by rGO/CNT/PPy nanocomposite

Ultralong-Cycling and Free-Standing Carboxylated Graphene/PEDOT:PSS Films as Electrode for Flexible Supercapacitors

Sewable high-performance poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate)/layered double hydroxide core-shell fiber electrodes for flexible supercapacitors

Composite electrodes with NiCoAl-LDH coated Ti3C2Tx MXene and incorporated Ag nanowires for screen-printable in-plane hybrid supercapacitors on textiles

A Novel High Performance Flexible Supercapacitor Based on Porous Carbonized Cotton/zno Nanoparticle/cus Micro-Sphere

Interfacing MXene flakes on fiber fabric as an ultrafast electron transport layer for high performance textile electrodes

MXene-coated Silk-Derived Carbon Cloth Toward Flexible Electrode for Supercapacitor Application

Microfluidic Fabrication of Hierarchically Porous Superconductive Carbon Black/graphene Hybrid Fibers for Wearable Supercapacitor with High Specific Capacitance

Construction of hierarchical polypyrrole coated copper-catecholate grown on poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) fibers for high-performance supercapacitors

Flexible Fabric-Based Wearable Solid-State Supercapacitor