Abstract:Wearable electronic devices such as health monitors, sensors, and e‐skin can be powered by lightweight, high‐power supercapacitors. Using a binder‐free and low‐temperature hydrothermal method, polyhedral ZnO nanoparticles were grown on carbon nanotube (CNT)‐decorated cotton fabric, which is friendly to human skin and highly wearable, inexpensive, and thus commercially viable. The concentration of the starting material, zinc acetate, was varied to optimize the electrochemical performance. The evenly spaced polyhedral ZnO facilitated efficient permeation of the electrolyte into the active material. The fabric filaments were decorated with CNTs to enhance electron transfer and the overall electrochemical processes. The symmetric cell comprised of cotton fabric decorated with ZnO polyhedron/CNT showed no discernible change in the cyclic voltammetry curves even after 500 bending cycles, demonstrating the mechanical durability of the electrode. The potential window of 1.6 V using a Na2SO4/K2SO4 aqueous dual‐ion electrolyte improved the long‐term electrochemical stability and increased the energy storage capacity. The capacitance retention was 94% after 5000 cycles at a current density of 1 A·g−1, indicating long‐term electrochemical stability. A specific capacitance of 375 F·g−1 at a current density of 5 A·g−1 and energy density of 33.3 Wh·kg−1 at a power density of 2000 W·kg−1 were recorded for the optimized electrode. Polyhedral ZnO was grown on cotton fabric using a hydrothermal process. The electrochemical performance was optimized by varying the zinc acetate concentration. The highest specific capacitance was 375 F·g−1 at a current density of 5 A·g−1. Under optimal conditions, the capacitance retention was 94% at N = 5000 cycles. The energy density of the electrode was as high as 33.3 Wh·kg−1. The decoration of fabric fibers by zinc oxide polyhedron and carbon nanotube via hydrothermal for use as flexible and lightweight supercapacitor electrodes was demonstrated. The hexagonal structures in a one‐step deposition, without any binder and a metallic current collector increase the specific capacitance and energy density of the overall device. The exceptional stability during long‐term cycling and wide (1.6 V) operating potential were also demonstrated.

Flexible Fabric-Based Wearable Solid-State Supercapacitor

A flexible, lightweight and stretchable all-solid-state supercapacitor based on warp-knitted stainless-steel mesh for wearable electronics

Development of flexible supercapacitors with coplanar integrated multi-walled carbon nanotubes/textile electrode and current collectors

Wearable Solid-State Supercapacitors Operating at High Working Voltage with a Flexible Nanocomposite Electrode

All-solid-state flexible supercapacitor of Carbonized MXene/Cotton fabric for wearable energy storage

A High‐Performance, Tailorable, Wearable, and Foldable Solid‐State Supercapacitor Enabled by Arranging Pseudocapacitive Groups and MXene Flakes on Textile Electrode Surface

Microfluidic Fabrication of Hierarchically Porous Superconductive Carbon Black/graphene Hybrid Fibers for Wearable Supercapacitor with High Specific Capacitance

A multifunctional interface design on cellulose substrate enables high performance flexible all-solid-state supercapacitors

A High-performance Flexible Pseudosupercapacitor Constructed on Conductive Cloth

Fabric- and film-structured supercapacitor

Sulfide‐Based Nickel‐Plated Fabrics for Foldable Quasi‐Solid‐State Supercapacitors

A Stretchable, Asymmetric, Coaxial Fiber-Shaped Supercapacitor for Wearable Electronics

Engineering Textile Electrode and Bacterial Cellulose Nanofiber Reinforced Hydrogel Electrolyte to Enable High‐Performance Flexible All‐Solid‐State Supercapacitors

Wearable fabric supercapacitors based on CNTs and polyhedral ZnO with a wide potential window

Enhancing the supercapacitor performance of flexible MXene /carbon cloth electrodes by oxygen plasma and chemistry modification

Scalable fabrication of textile-based planar-structured supercapacitors with excellent capacitive performance

Electrochemical Performance of Flexible Graphene-Based Fibers As Electrodes for Wearable Supercapacitors

High performance fiber-shaped flexible asymmetric supercapacitor based on MnO2 nanostructure composited with CuO nanowires and carbon nanotubes

Flexible carbon cloth supercapacitors with high power and energy densities

Non-woven fabric electrodes based on graphene-based fibers for areal-energy-dense flexible solid-state supercapacitors

Textile-based supercapacitors for flexible and wearable electronic applications