Photoelastic studies in the edentulous human mandible.

J. Ralph

DOI: https://doi.org/10.1016/0300-5712(75)90017-2

Abstract:

What problem does this paper attempt to address?

SnS2 Nanowall Arrays Toward High-Performance Sodium Storage.

Peng Zhou,Xiao Wang,Wenhao Guan,Dan Zhang,Libin Fang,Yinzhu Jiang

DOI: https://doi.org/10.1021/acsami.6b13613

IF: 9.5

2017-01-01

ACS Applied Materials & Interfaces

Abstract:Cost-effective sodium ion batteries (SIBs) are emerging as a desirable alternative choice to lithium ion batteries in terms of application in large-scale energy storage devices. SnS2 is regarded as a potential anode material for SIBs because of its unique layered structure and high theoretical specific capacity. However, the development of SnS2 was hindered by the sluggish kinetics of the diffusion process and the inevitable volume change during repeated sodiation-desodiation processes. In this work, SnS2 with a unique nanowall array (NWA) structure is fabricated by one-step pulsed spray evaporation chemical vapor deposition (PSE-CVD), which could be used directly as binder-free and carbon-free anodes for SIBs. The SnS2 NWA electrode achieves a high reversible capacity of 576 mAh g-1 at 500 mA g-1 and enhanced cycling stability. Attractively, an excellent rate capability is demonstrated with ∼370 mAh g-1 at 5 A g-1, corresponding to a capacity retention of 64.2% at 500 mA g-1. The superior sodium storage capability of the SnS2 NWA electrode could be attributed to outstanding electrode design and a rational growth process, which favor fast electron and Na-ion transport, as well as provide steady structure for elongated cycling.
Bimetallic Copper Tin Sulfide Nanosheet Arrays Encapsulated in Nitrogen-Doped Carbon Shells for Boosted Sodium Storage Performance

Jingyi Zhang,Chongwei Li,Jinchuan Hou,Jing Zhang,Liang Wang,Peijia Wang,Zhujun Yao,Yefeng Yang

DOI: https://doi.org/10.1021/acsaem.1c01766

IF: 6.4

2021-01-01

ACS Applied Energy Materials

Abstract:SnS2 has been conceived as a promising candidate for sodium-ion batteries (SIBs); however, the inferior intrinsic electrical conductivity, huge volume variation, and continuous pulverization upon cycling still hamper its practical application. To tackle these issues, a honeycomb-like hybrid architecture is delicately designed and constructed by encapsulating Cu-doped SnS2 nanosheet arrays in N-doped carbon coating (denoted as Cu-SnS2@NC). Benefitting from the synergistic effects of N-doped carbon coating and moderate Cu doping, the hybrid nanoarrays can effectively facilitate the ion/electron transfer ability, mitigate the mechanical stress, and improve the structural stability in the repeated Na+ insertion/extraction process. The optimal CuSnS2@NC nanoarrays display a remarkably high specific capacity of 1041.8 mA h g(-1) at 0.1 A g(-1) and much improved rate performance and cycling durability. By coupling the pseudocapacitive behavior-dominated Cu-SnS2@NC anode with the Na3V2(PO4)(3) cathode, the full battery provides a high energy density of 232.4 W h kg(-1) at a power density of 239.6 W kg(-1). This work shall bring more insight into the ingenious design and fabrication of bimetallic sulfide arrays as advanced anodes for SIBs.
Fabrication of S,N-Doped Carbon-Coated SnS2/SnS Heterostructures Supported by Hollow Carbon Microspheres for Sodium-Ion Storage

Suning Gao,Zaichun Liu,Liangtao Yang,Jie Shao,Qunting Qu,Yuping Wu,Philipp Adelhelm,Rudolf Holze

DOI: https://doi.org/10.1149/1945-7111/abf5f6

IF: 3.9

2021-01-01

Journal of The Electrochemical Society

Abstract:Developing novel anode materials containing electroactive heterostructures which boost ion and charge transfer kinetics in a carbon matrix is still a great challenge. Here we report on a new smartly designed material: SnS2/SnS p-n heterostructures embedded in S,N-doped carbon layer supported by hollow carbon spheres (C@SnSx@C) by a facile method and applied as negative electrode material in sodium ion batteries. The C@SnSx@C2 (at optimized carbon ratio) negative electrode can deliver an initial reversible capacity of 636.5 mAh·g−1 at 0.1 A·g−1, superior rate capability (265.1 mAh·g−1 at rate of 10.0 A·g−1) and long cycle life (capacity retention of 96.3 % at 1.0 A·g−1 after 150 cycles). The SnS2/SnS p-n heterojunctions provide a lower sodium ion diffusion energy barrier (0.38 eV), higher Na+ adsorption energy (−4.66 eV) and higher electronic conductivity due to an internal electric field according to density functional theory calculations compared to plain SnS. Moreover, S,N-doped carbon facilitates electronic conductivity and buffers the volume changes during the conversion reaction-based SnSx upon sodium insertion and extraction process. Porous hollow carbon spheres contribute to prevent the agglomeration of SnS2/SnS nanosheets and keep the structural integrity. Our findings on this unique material might be extended to other ion battery technologies.
Anchoring SnS2 on TiC/C Backbone to Promote Sodium Ion Storage by Phosphate Ion Doping.

Yanbin Shen,Shengjue Deng,Ping Liu,Yan Zhang,Yahao Li,Xili Tong,Hong Shen,Qi Liu,Guoxiang Pan,Lingjie Zhang,Xiuli Wang,Xinhui Xia,Jiangping Tu

DOI: https://doi.org/10.1002/smll.202004072

IF: 13.3

2020-01-01

Small

Abstract:Tin disulfide (SnS2 ) shows promising properties toward sodium ion storage with high capacity, but its cycle life and high rate capability are still undermined as a result of poor reaction kinetics and unstable structure. In this work, phosphate ion (PO4 3- )-doped SnS2 (P-SnS2 ) nanoflake arrays on conductive TiC/C backbone are reported to form high-quality P-SnS2 @TiC/C arrays via a hydrothermal-chemical vapor deposition method. By virtue of the synergistic effect between PO4 3- doping and conductive network of TiC/C arrays, enhanced electronic conductivity and enlarged interlayer spacing are realized in the designed P-SnS2 @TiC/C arrays. Moreover, the introduced PO4 3- can result in favorable intercalation/deintercalation of Na+ and accelerate electrochemical reaction kinetics. Notably, lower bandgap and enhanced electronic conductivity owing to the introduction of PO4 3- are demonstrated by density function theory calculations and UV-visible absorption spectra. In view of these positive factors above, the P-SnS2 @TiC/C electrode delivers a high capacity of 1293.5 mAh g-1 at 0.1 A g-1 and exhibits good rate capability (476.7 mAh g-1 at 5 A g-1 ), much better than the SnS2 @TiC/C counterpart. This work may trigger new enthusiasm on construction of advanced metal sulfide electrodes for application in rechargeable alkali ion batteries.
Anchoring SnS 2 on TiC/C Backbone to Promote Sodium Ion Storage by Phosphate Ion Doping

Yanbin Shen,Shengjue Deng,Ping Liu,Yan Zhang,Yahao Li,Xili Tong,Hong Shen,Qi Liu,Guoxiang Pan,Lingjie Zhang,Xiuli Wang,Xinhui Xia,Jiangping Tu

DOI: https://doi.org/10.1002/smll.202004072

IF: 13.3

2020-09-06

Small

Abstract:Tin disulfide (SnS2) shows promising properties toward sodium ion storage with high capacity, but its cycle life and high rate capability are still undermined as a result of poor reaction kinetics and unstable structure. In this work, phosphate ion (PO43−)‐doped SnS2 (P‐SnS2) nanoflake arrays on conductive TiC/C backbone are reported to form high‐quality P‐SnS2@TiC/C arrays via a hydrothermal–chemical vapor deposition method. By virtue of the synergistic effect between PO43− doping and conductive network of TiC/C arrays, enhanced electronic conductivity and enlarged interlayer spacing are realized in the designed P‐SnS2@TiC/C arrays. Moreover, the introduced PO43− can result in favorable intercalation/deintercalation of Na+ and accelerate electrochemical reaction kinetics. Notably, lower bandgap and enhanced electronic conductivity owing to the introduction of PO43− are demonstrated by density function theory calculations and UV–visible absorption spectra. In view of these positive factors above, the P‐SnS2@TiC/C electrode delivers a high capacity of 1293.5 mAh g−1 at 0.1 A g−1 and exhibits good rate capability (476.7 mAh g−1 at 5 A g−1), much better than the SnS2@TiC/C counterpart. This work may trigger new enthusiasm on construction of advanced metal sulfide electrodes for application in rechargeable alkali ion batteries.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
In Situ Forming Na─Sn Alloy/Na2S Interface Layer for Ultrastable Solid State Sodium Batteries

Tinghu Liu,Pan Xiang,Yunming Li,Zhendong Li,Huazhang Sun,Jing Yang,Ziqi Tian,Xiayin Yao

DOI: https://doi.org/10.1002/adfm.202316528

IF: 19

2024-03-30

Advanced Functional Materials

Abstract:A kinetically stable Na─Sn alloy/Na2S interphase is in situ formed at Na3.4Zn0.1Zr1.9Si2.2P0.8O12/Na interface, realizing intimate interfacial contact, and inhibition of dendrite growth, thus resulting in a high critical current density of 9.4 mA cm−2 under 9.4 mAh cm−2 for Na3.4Zn0.1Zr1.9Si2.2P0.8O12. Besides, the Na3V2(PO4)3/Na3.4Zn0.1Zr1.9Si2.2P0.8O12@SnS2/Na batteries exhibit superior capacity retention of 88.1% after 1000 cycles at 1 C. The poor interfacial compatibility between sodium superionic conductor (NASICON) electrolyte and metallic sodium anode will lead to severe dendrite penetration, impeding the application of NASICON electrolytes for solid state sodium batteries. Herein, a homogeneous SnS2 coating layer is sputtered on the surface of Na3.4Zn0.1Zr1.9Si2.2P0.8O12 electrolyte to in situ construct a kinetically stable Na─Sn alloy/Na2S interlayer, possessing superior Na affinity, low diffusion barrier, and electronic insulating character to suppress dendrite growth, which is confirmed by experiments and density‐functional theory calculations. Benefiting from the Na─Sn alloy/Na2S interphase, the critical current density of Na3.4Zn0.1Zr1.9Si2.2P0.8O12 increases from 2.4 to 9.4 mA cm−2. In addition, the obtained Na3V2(PO4)3/Na3.4Zn0.1Zr1.9Si2.2P0.8O12@SnS2/Na solid state batteries exhibit a high initial reversible discharge capacity of 115.1 mAh g−1 at 0.1 °C with an initial Coulombic efficiency of 93.6%, and a capacity retention rate of 88.1% after 1000 cycles at 1 C.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
SnS2@C Hollow Nanospheres with Robust Structural Stability as High-Performance Anodes for Sodium Ion Batteries

Shuaihui Li,Zhipeng Zhao,Chuanqi Li,Zhongyi Liu,Dan Li

DOI: https://doi.org/10.1007/s40820-019-0243-7

2019-02-21

Abstract:Abstract Constructing unique and highly stable structures with plenty of electroactive sites in sodium storage materials is a key factor for achieving improved electrochemical properties through favorable sodium ion diffusion kinetics. An SnS 2 @carbon hollow nanospheres (SnS 2 @C) has been designed and fabricated via a facile solvothermal route, followed by an annealing treatment. The SnS 2 @C hybrid possesses an ideal hollow structure, rich active sites, a large electrode/electrolyte interface, a shortened ion transport pathway, and, importantly, a buffer space for volume change, generated from the repeated insertion/extraction of sodium ions. These merits lead to the significant reinforcement of structural integrity during electrochemical reactions and the improvement in sodium storage properties, with a high specific reversible capacity of 626.8 mAh g −1 after 200 cycles at a current density of 0.2 A g −1 and superior high-rate performance (304.4 mAh g −1 at 5 A g −1 ).

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology
Confining Ultrafine Tin Monophosphide in Ti3C2Tx Interlayers for Rapid and Stable Sodium Ion Storage

Jiayong Tang,Xiyue Peng,Tongen Lin,Xia Huang,Bin Luo,Lianzhou Wang

DOI: https://doi.org/10.1016/j.esci.2021.12.004

2021-01-01

eScience

Abstract:Phase separation in conversion/alloying-based anodes easily causes crystal disintegration and leads to bad cycling performance. Tin monophosphide (SnP) is an excellent anode material for sodium ion battery due to its unique three-dimensional crystallographic layered structure. In this work, we report the in situ growth of ultrafine SnP nanocrystals within Ti3C2Tx MXene interlayers. The MXene framework is used as a conductive matrix to provide high ionic/electrical transfer paths and reduce the Na+ diffusion barrier in the electrode. In situ and ex situ measurements reveal that the synergy between small SnP crystal domains and the confinement provided by the MXene host prevents mechanical disintegration and major phase separation during the sodiation and desodiation cycles. The resultant electrode exhibits fast Na+ storage kinetics and excellent cycling stability for over 1000 cycles. A full cell assembled with this new SnP-based anode and a Na3V2(PO4)3 cathode delivers a high energy density of 265.4 Wh kg-1 and a power density of 3252.4 W kg-1, outperforming most sodium-ion batteries reported to date.
Introduction of SnS2 to Regulate the Ferrous Disulfide Phase Evolution for the Construction of Triphasic Heterostructures Enabling Kinetically Accelerated and Durable Sodium Storage

Zibo Zhao,Guang Sun,Yiming Zhang,Ran Hua,Xiting Wang,Naiteng Wu,Jin Li,Guilong Liu,Donglei Guo,Ang Cao,Xianming Liu,Hongshuai Hou

DOI: https://doi.org/10.1002/adfm.202314679

IF: 19

2024-01-08

Advanced Functional Materials

Abstract:The introduction of SnS2 regulates the proportion of pyrite and marcasite phase in FeS2, which not only inhibits the formation of marcasite FeS2 with the inferior electrochemical activity, but also constructs the triphasic heterostructures to accelerate the reaction kinetics and mitigate the interfacial passivation, thereby achieving the excellent sodium storage performances both in half‐ and full‐cells. Transition metal sulfides (TMSs) still confront the challenges of capacity fading and inferior fast‐charging capability for sodium storage. The rational design of heterostructures enables a new approach to conquer these drawbacks. In this work, a hierarchical structure consisting of SnS2 nanosheets and FeS2 microrods with triphasic heterostructures is proposed by the facile secondary growth and sulfidation process. The introduction of tin sources regulates the proportion of pyrite and marcasite phases, thereby achieving the triphasic heterostructures comprising pyrite, marcasite FeS2, and SnS2. When served as anode material for sodium‐ion batteries, the optimized sample exhibits a high reversible capacity (901 mAh g−1) and durable cycling performances (827 mAh g−1 after 200 cycles at 1 A g−1 and 742 mAh g−1 after 700 cycles at 5 A g−1). Paring with the commercial Na3V2(PO3)3 cathodes, the full‐cell also delivers extraordinary cyclic stability with a high capacity of 618 mAh g−1 (based on the weight of anode material) after 200 cycles at 1 A g−1 (98.7% capacity retention). The hierarchical structure with adjustably triphasic heterogeneous interfaces alleviates the volumetric expansion and interfacial passivation of active material, while modulating the energy band structure and inducing the build‐in electric fields to boost Na+/electrons transport rate.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Point-cavity-like carbon layer coated SnS nanotubes with improved energy storage capacity for lithium/sodium ion batteries

Hong Yin,Luo Jia,Huai Yu Li,An Liu,Gangyong Li,Yucan Zhu,Junlin Huang,Minglei Cao,Zhaohui Hou

DOI: https://doi.org/10.1016/j.est.2023.107354

IF: 9.4

2023-04-16

Journal of Energy Storage

Abstract:Tin monosulfide (SnS) is known as a prospective anode material for lithium/sodium ion batteries due to its high capacity, low cost, and easy preparation. Carbon coating is a powerful strategy to improve poor electronic conductivity and alleviate the large volume expansion of the SnS, thus achieving high electrochemical performances. However, the commonly used carbon coatings strategies usually generate interstices between the SnS and carbonaceous material , interrupting electron and ion transfer and unsatisfied accommodation of volume expansion. Herein, point-cavity-like carbon coated SnS nanotubes (CN/SnS) were synthesized by a close-knit mechanism using polyvinylpyrrolidone (PVP) and carbon nitride (g-C 3 N 4 ) as carbon sources. The carbonyl group in PVP can form hexahydroxylated stannyl compound with Sn 2+ , and the amine group can generate CN bond with the g-C 3 N 4 template in an aqueous solution, respectively. The unique construction of CN/SnS can successfully reinforce the electron and ion transfer capability and accommodate volume expansion. The reformative effectivity dramatically improves the energy storage properties of SnS electrode for LIBs/SIBs. The CN/SnS electrode can deliver high specific capacities of 547.7 mAh g −1 at 1.0 A g −1 after 300 cycles for lithium-ion batteries and 298.2 mAh g −1 at 0.1 A g −1 after 200 cycles for sodium-ion batteries, respectively. The structure design is practical and feasible, which could be used to develop high-performance transition metal sulfide/carbon composite anodes for LIBs and SIBs.

energy & fuels
Encapsulating Sulfides into Tridymite/Carbon Reactors Enables Stable Sodium Ion Conversion/Alloying Anode with High Initial Coulombic Efficiency Over 89%

Yani Liu,Linpo Li,Renming Zhan,Maowen Xu,Jian Jiang,Jinping Liu

DOI: https://doi.org/10.1002/adfm.202009598

IF: 19

2021-02-08

Advanced Functional Materials

Abstract:Electrode dissolution/collapses and interfacial reactions pose challenges to batteries, leading to pronounced capacity loss particularly during the initial few cycles. As high‐capacity conversion/alloying anodes for sodium storage, metal sulfides generally show unsatisfactory performances like poor initial Coulombic efficiency (ICE; mostly <70% in the usual electrolyte) and inferior cyclic stability due to thick solid‐electrolyte interface (SEI) layer formation and ubiquitous volume/phase changes. Using SnS2 as an example, here, sulfides are elaborately encapsulated into functionalized amorphous tridymite/carbon reactors to address the above issues. The outer tridymite/carbon manifests good ionic permeability and superb electrochemical/mechanical tolerance against destructive Na+ insertion. Confining actives into tailored reactors endows SnS2 full of nanoboundaries with an ultrahigh ICE of ≈89.13% and remarkable electrochemical attributes including large initial capacity (Max. 733.24 mAh g−1), prominent stability in subsequent cycles, and excellent rate capability. Detailed investigation unveils that thin and steady SEI condition on tridymite/carbon rather than SnS2 is key to achieving outstanding ICE. Engineered reactors always keep intact and free of valence‐state changes, guaranteeing capacities running at a high level without an evident downtrend. Their peculiar functions on enlisting Na+ diffusion/transport and inhibiting sulfides' release are also discussed. Packed full‐cell Na‐ion batteries with less irreversibility may show great potential in practical utilizations.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Two-Dimensional Tin Disulfide Nanosheets for Enhanced Sodium Storage

Wenping Sun,Xianhong Rui,Dan Yang,Ziqi Sun,Bing Li,Wenyu Zhang,Yun Zong,Srinivasan Madhavi,Shixue Dou,Qingyu Yan

DOI: https://doi.org/10.1021/acsnano.5b05229

2015-01-01

Abstract:Sodium-ion batteries (SIBs) are considered as complementary alternatives to lithium-ion batteries for grid energy storage due to the abundance of sodium. However, low capacity, poor rate capability, and cycling stability of existing anodes significantly hinder the practical applications of SIBs. Herein, ultrathin two-dimensional SnS2 nanosheets (3-4 nm in thickness) are synthesized via a facile refluxing process toward enhanced sodium storage. The SnS2 nanosheets exhibit a high apparent diffusion coefficient of Na(+) and fast sodiation/desodiation reaction kinetics. In half-cells, the nanosheets deliver a high reversible capacity of 733 mAh g(-1) at 0.1 A g(-1), which still remains up to 435 mAh g(-1) at 2 A g(-1). The cell has a high capacity retention of 647 mA h g(-1) during the 50th cycle at 0.1 A g(-1), which is by far the best for SnS2, suggesting that nanosheet morphology is beneficial to improve cycling stability in addition to rate capability. The SnS2 nanosheets also show encouraging performance in a full cell with a Na3V2(PO4)3 cathode. In addition, the sodium storage mechanism is investigated by ex situ XRD coupled with high-resolution TEM. The high specific capacity, good rate capability, and cycling durability suggest that SnS2 nanosheets have great potential working as anodes for high-performance SIBs.
Large Interlayer Spacing of Few-Layered Cobalt–Tin-Based Sulfide Providing Superior Sodium Storage

Shuming Dou,Jie Xu,Hirbod Maleki Kheimeh Sari,Hong-Hui Wu,Junhua Hu,Yaohui Zhang,Linlin Fan,Dongbin Xiong,Wei Zhou,Yanan Chen,Xifei Li

DOI: https://doi.org/10.1021/acsami.0c11756

2020-08-17

Abstract:Mixed transition metal sulfides (MTMSs) have been regarded as a potential anode material for sodium-ion batteries (SIBs) due to their high reversible specific capacity. Herein, nanoflower-like few-layered cobalt–tin-based sulfide (F-CoSnS) with a large interlayer spacing is synthesized via a facile route for superior sodium storage. The growth mechanism of this unique F-CoSnS is systematically studied. Such distinctive nanostructured engineering synergistically combines a broad interlayer spacing (∼ 0.85 nm), the functionalities of few (2–3) layers, and the introduction of heterogeneous metal atoms, reducing the ion diffusion energy barrier for high-efficiency intercalation/deintercalation of Na+ ions, as revealed by density functional theory (DFT) calculations. With further incorporation of a three-dimensional (3D) conductive network, the electrode shows a large sodium storage capacity (493.4 mAh g–1 at 50 mA g–1), remarkable rate capability (316.1 mAh g–1 at 1600 mA g–1), and superior cycling stability (450 mAh g–1 at 50 mA g–1 with 91.2% capacity retention, 0.044% fading rate per cycle, and approximately 100% Coulombic efficiency after 200 cycles). This work demonstrates that the few-layered ternary MTMSs are highly applicable for the development of advanced SIB anode materials with high performance.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c11756?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c11756</a>.XRD, TGA, BET, SEM, TEM, XPS, and Raman analyses; cycling performance of pristine C and ; Rct of ; comparison of interlayer distance of F-CoSnS with previously reported metal chalcogenides with a layered structure (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c11756/suppl_file/am0c11756_si_001.pdf">PDF</a>).This article has not yet been cited by other publications.

materials science, multidisciplinary,nanoscience & nanotechnology
N-doped Sb2SnO5@C as advanced anode material for sodium-ion batteries

Chujie Yu,Baoyang Liu,Mingzhu Li,Xuli Ding

DOI: https://doi.org/10.1007/s11581-024-05383-x

IF: 2.961

2024-01-19

Ionics

Abstract:Sodium-ion battery is evolving into a desirable alternative technology to lithium-ion batteries, thanks to its wide material distribution and low cost. Tin-antimony oxide is gaining research interest as a sodium-ion battery anode material owing to its ideal theoretical specific capacity, environment friendly, and low cost. However, because of the inner nature of poor electrical conductivity of oxides and slow ionic diffusion kinetic, the electrochemical performance of tin-antimony oxides (SSO) differs significantly from the theoretical value of merit. In this paper, we demonstrated N-doping porous carbon fibers encapsulated Sn/Sb@Sb 2 SnO 5 composite (Sn/Sb@Sb 2 SnO 5 @PCFs-N) material. Through the use of a simple electrostatic spinning technique, the Sn and Sb nanocrystalline were in situ generated around the SSOs in a specific way, and the N-doping in the fabricated porous carbon fibers can modulate the charge transport in the fabricated composite. The unique structure can successfully increase the electrical conductivity and the specific capacity of the fabricated composite. Using as anode for Na + ions storage, the fabricated composite delivers high specific capacity and good cycling stability and rate capability, showing a high capacity of 450 mAhg −1 at 50 mAg −1 current density even after 100 cycles. The better rate capability can be sustained even when the current raised up to 500 mA g −1 . This current work can offer a perspective on the effect of phases modified and doping on the functionality of materials for the next-generation high-specific energy sodium-ion battery.

chemistry, physical,physics, condensed matter,electrochemistry
Electrochemically alternating voltage induction and in-situ preparation of tin-based multiphase structures anode for sodium-ion batteries

Li He,Mingjun Jing,Dan Li,Wenjie Liu,Juan Li,Meixia Yang,Xinkai Xu,Yingchang Yang,Yansong Bai,Xiaoqing Zou,Tianjing Wu,Xianyou Wang

DOI: https://doi.org/10.1016/j.jallcom.2023.172968

IF: 6.2

2023-12-07

Journal of Alloys and Compounds

Abstract:Tin-based materials possess a high-capacity as a potential anode for Na-ion batteries (SIBs), but the inferior electric conductivity and sluggish reaction kinetics limit their further development. In this paper, we have successfully constructed multiphase structure SnO 2 /SnS/SnS 2 by combining the electrochemical induction and in-situ hydrothermal method to effectively alleviate these problems. The continuous addition of sulfur source (thioacetamide, TAA) results in the formation of a transition from pure product (SnO 2 ) to double structure (SnO 2 /SnS), and finally multiphase structure (SnO 2 /SnS/SnS 2 ). Compared to single or bimetal chalcogenides, the tri-metal chalcogenides have strengthened synergistic effects between diverse components. Additionally, the SnO 2 /SnS/SnS 2 composites exhibit small grain size and abundant mesoporous structure, which aid to shorten the distance of ions transfer and increase surface active sites for Na-ions storage. The SnO 2 /SnS/SnS 2 anode displays optimal diffusion coefficient (1.94 × 10 −15 cm 2 s −1 ) and cycling durability, with a recoverable specific discharge ability of 401 mA h g −1 over 100 cycles at 100 mA g −1 and a maintenance overpasses 77 %. These results indicate that the construction of multiphase structures is a prospective way to improve the reaction kinetics of Sn-based materials for SIBs.

materials science, multidisciplinary,chemistry, physical,metallurgy & metallurgical engineering
Hierarchical SnS/SnS2 heterostructures grown on carbon cloth as binder-free anode for superior sodium-ion storage

Lu Jiamin,Zhao Shuyang,Fan Shaoxun,Lv Qian,Li Jia,Lv Ruitao

DOI: https://doi.org/10.1016/j.carbon.2019.03.022

IF: 10.9

2019-01-01

Carbon

Abstract:Sodium-ion batteries (SIBs) have attracted tremendous attention as next-generation high-performance and low-cost energy storage devices. However, achieving both high capacity and good cycling performance is still challenging. Tin sulfides are promising SIB anode materials but usually demonstrate a capacity much lower than theoretical values and suffer from large volume expansion during charge-discharge process. Herein, SnS/SnS2 heterostructures are vertically grown on carbon cloth substrates and used as a binder-free self-supporting anode, exhibiting a high Na+ storage capacity (>800 mAh g(-1) at 200 mAg(-1)) and good cycling performance (>400 mAh g(-1) after 1000 cycles at 1 A g(-1)). The excellent sodium-ion storage performance can be attributed to the enhanced charge-transfer kinetics by the SnS/ SnS2 heterostructure, the hierarchical structure composed of uniform nanohoneycomb-like SnS/SnS2 structure and the carbon cloth as the self-supporting framework. The superior electrochemical performance by forming heterostructures may inspire the rational design of layered materials for high-performance SIB applications. (C) 2019 Published by Elsevier Ltd.
Heterostructured Mn-Sn Bimetallic Sulfide Nanocubes Confined in N, S- co-Doped Carbon Framework as High-Performance Anodes for Sodium-Ion Batteries

Chao Li,Shunan Ke,Sihan Liu,Ge Wu,Qing Li,Yu Zhang,Kangzhe Cao

DOI: https://doi.org/10.1021/acs.langmuir.4c01760

IF: 3.9

2024-07-20

Langmuir

Abstract:Benefiting from its high theoretical capacity, tin disulfide (SnS2) draws abundant interest and attention for its promising practical prospect for sodium-ion batteries (SIBs). However, the huge volumetric variation in sodiation/desodiation reactions usually results in the fast decay of rate and cycling properties, which seriously obstructs its future applicable foregrounds. Herein, heterostructured Mn-Sn bimetallic sulfide nanocubes confined in N and S-codoped carbon (MSS@NSC) were rationally designed via a facile coprecipitation followed by a sulfurization strategy. When used as anodes for SIBs, the heterojunctions at the interfaces effectively accelerate the Na+ diffusion rate to promote the sodium-storage reaction kinetics. The N and S-codoped carbon provides a rapid conductive framework for the fast charge transport during the sodium-storage process. Moreover, the beneficial confinement effect of the NSC layer effectively guarantees a superb cycle property for the MSS@NSC anode. The favorable synergistic effects between the highly conductive framework of the NSC and MSS heterostructure endow the MSS@NSC anode with satisfactory electrochemical Na-storage properties.
Three-dimensional micro-nanostructures based on binary transitional metal sulfides with doped carbon protector enabled high-performance and safe batteries

Wei Bai,Yanan Wei,Zhirong Wang,Junling Wang,Yan Zhang,Jie Yu

DOI: https://doi.org/10.1016/j.jcis.2023.03.155

IF: 9.9

2023-03-31

Journal of Colloid and Interface Science

Abstract:The lack of suitable Li + reservoirs and the risk of thermal runaway have hindered the extended use of lithium-ion batteries. Although utilizing Li 4 Ti 5 O 12 or TiO 2 can improve the thermal safety, their low theoretical capacities compromise the electrochemical performance of the cell. In this study, a three-dimensional micro-nanostructure based on binary transitional metal sulfides (TMSs) with a doped carbon protector (SnS/Co 9 S 8 @HC) is designed. When operating at 0.1–1 A g −1 , the SnS/Co 9 S 8 @HC cell exhibits a high inceptive capacity of 1104.8 mAh g −1 with a high coulomb efficiency of 97.1%. Even after 1000 cycles, it delivers a relatively-high capacity of 450.3 mAh g −1 , indicating a low capacity decay rate of 0.033% per cycle (from the 2nd to the 1000th cycle). The thermal runaway actions of the cells with graphite and SnS/Co 9 S 8 @HC anodes are investigated. The results demonstrate that the cell with the SnS/Co 9 S 8 @HC anode exhibits a significantly reduced maximum thermal runaway temperature of 473.5 ± 6.2°C and maximum temperature increasing rate of 15.1 ± 0.6 °C min −1 compared to the graphite cell. This indicates that SnS/Co 9 S 8 @HC cell holds higher thermal safety. The potential of SnS/Co 9 S 8 @HC as sodium ion batteries anode is also investigated. The results indicate an initial capacity of 631.7 mAh g −1 , with a low capacity decay rate of 0.063% per cycle when operating at 2 A g −1 . This work may be enlightening for constructing multi-phase TMSs based hierarchical structure towards superior and safe energy storage.

chemistry, physical
One-pot synthesis of nanocrystalline SnS@tremella-like porous carbon by supercritical CO2 method for excellent sodium storage performance

Hui Huang,Gangfeng Yang,Jiage Yu,Jun Zhang,Yang Xia,Kun Wang,Chu Liang,Yongping Gan,Xinping He,Wenkui Zhang

DOI: https://doi.org/10.1016/j.electacta.2021.137933

IF: 6.6

2021-03-01

Electrochimica Acta

Abstract:Sodium-ion batteries (SIBs) have been regarded as latent complementary energy storage devices of lithium-ion batteries (LIBs). How to construct and manufacture advanced materials is a great challenge for the development of SIBs. In this work, we design a simple supercritical CO2 method to fabricate an interesting composite of nanocrystalline porous carbon (). The composite retains porous structure of TPC and reveals a uniform dispersion of SnS nanocrystals. The performs an impressive cycling stability (457 mA h g−1 after 100 cycles with capacity retention of 90.5% at 0.2 A g−1, 397 mA h g−1 after 100 cycles with capacity retention of 93% at 1 A g−1) and great rate performance. The results of subsequent tests show that the outstanding electrochemical performance derives from the double surface capacitive characteristics and good composite effect between TPC and nanocrystalline SnS. This work provides an innovative synthesis of sulphides and carbonaceous materials, thus addressing some of the disadvantages of sulphides as an anode electrode for SIBs.

electrochemistry
Construction of Robust Solid-Electrolyte Interphase via Electrode Additive for High-Performance Sn-Based Anodes of Sodium-Ion Batteries

Cheng Zheng,Qian Yao,Rui Li,Deluo Ji,Chunting Wang,Zhongchao Bai,Nana Wang,Shixue Dou,Huakun Liu,Jian Yang

DOI: https://doi.org/10.1016/j.ensm.2024.103334

IF: 20.4

2024-03-10

Energy Storage Materials

Abstract:Alloy-based Sn anode for sodium-ion batteries has attracted tremendous attention due to its low working voltage, high specific capacity, and good availability. Its application is hindered, however, by inferior cycling stability due to its huge volume changes and unstable solid-electrolyte interphase (SEI) film. Herein, tetraphenylphosphonium bis(trifluoromethanesulfonyl)imide (TPPTFSI) is introduced into the electrode and spontaneously adsorbed on the surfaces of commercial Sn microparticles (μ-Sn) to improve the electrochemical performance of the Sn anode. In the first cycle, the TPP + component of TPPTFSI decomposes to form an organic component of the SEI film, thereby enhancing its flexibility. Meanwhile, the TFSI − component is converted into an inorganic constituent of the SEI, improving its robustness and ionic conductivity. Therefore, the cycling performance of the μ-Sn is enhanced significantly. The modified electrode, TPPTFSI-Sn, delivers a capacity of 619.7 mAh g −1 after 2000 cycles at 2.0 A g −1 , while the control sample can only survive for 30 cycles. Importantly, the full cell also exhibits excellent performance, including rate performance and cycling stability. Its simple operation and remarkable electrochemical performance improvement indicate the promising prospects of this strategy for advanced electrodes in SIBs.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology

Photoelastic studies in the edentulous human mandible.

SnS2 Nanowall Arrays Toward High-Performance Sodium Storage.

Bimetallic Copper Tin Sulfide Nanosheet Arrays Encapsulated in Nitrogen-Doped Carbon Shells for Boosted Sodium Storage Performance

Fabrication of S,N-Doped Carbon-Coated SnS2/SnS Heterostructures Supported by Hollow Carbon Microspheres for Sodium-Ion Storage

Anchoring SnS2 on TiC/C Backbone to Promote Sodium Ion Storage by Phosphate Ion Doping.

Anchoring SnS 2 on TiC/C Backbone to Promote Sodium Ion Storage by Phosphate Ion Doping

In Situ Forming Na─Sn Alloy/Na2S Interface Layer for Ultrastable Solid State Sodium Batteries

SnS2@C Hollow Nanospheres with Robust Structural Stability as High-Performance Anodes for Sodium Ion Batteries

Confining Ultrafine Tin Monophosphide in Ti3C2Tx Interlayers for Rapid and Stable Sodium Ion Storage

Introduction of SnS2 to Regulate the Ferrous Disulfide Phase Evolution for the Construction of Triphasic Heterostructures Enabling Kinetically Accelerated and Durable Sodium Storage

Point-cavity-like carbon layer coated SnS nanotubes with improved energy storage capacity for lithium/sodium ion batteries

Encapsulating Sulfides into Tridymite/Carbon Reactors Enables Stable Sodium Ion Conversion/Alloying Anode with High Initial Coulombic Efficiency Over 89%

Two-Dimensional Tin Disulfide Nanosheets for Enhanced Sodium Storage

Large Interlayer Spacing of Few-Layered Cobalt–Tin-Based Sulfide Providing Superior Sodium Storage

N-doped Sb2SnO5@C as advanced anode material for sodium-ion batteries

Electrochemically alternating voltage induction and in-situ preparation of tin-based multiphase structures anode for sodium-ion batteries

Hierarchical SnS/SnS2 heterostructures grown on carbon cloth as binder-free anode for superior sodium-ion storage

Heterostructured Mn-Sn Bimetallic Sulfide Nanocubes Confined in N, S- co-Doped Carbon Framework as High-Performance Anodes for Sodium-Ion Batteries

Three-dimensional micro-nanostructures based on binary transitional metal sulfides with doped carbon protector enabled high-performance and safe batteries

One-pot synthesis of nanocrystalline SnS@tremella-like porous carbon by supercritical CO2 method for excellent sodium storage performance

Construction of Robust Solid-Electrolyte Interphase via Electrode Additive for High-Performance Sn-Based Anodes of Sodium-Ion Batteries