Abstract:The emerging market for consumer electronics and electric vehicles has stimulated intensive research on lithium metal batteries (LMBs) with high energy densities and large cycle lifetimes. A metallic Li anode has a high theoretical specific capacity of 3860 mAh.g(-1) and lowest redox potential of -3.04 V (vs. the standard hydrogen electrode) and is generally considered an ideal electrode for next-generation high-energy-density LMBs. However, their deployment in practical batteries is severely hindered by the formation of unsafe dendrites and fast capacity decay due to the uncontrollable formation of fragile solid electrolyte interfaces (SEls). Herein, we describe the stable cycling of carbon paper (Cp)-supported Li-Sn alloy anodes in carbonate electrolytes modified with 1 mol.L-1 bis(2,2,2-trifluorotoluene) carbonate (DTFEC). The molten Li-Sn alloy with 8% (mass fraction) Sn was synthesized through thermal treatment at 400 degrees C in an atmosphere of Ar. The Li-Sn-alloy-coated carbon paper (SnLi/Cp) was obtained after the molten alloy was conformally loaded onto the surface of a carbon paper under the action of capillarity. The as-synthesized interconnected SnLi/Cp composite was characterized by X-ray diffraction, energy-dispersive spectrometry, and scanning electron microscopy. The porous SnLi/Cp composite consisted of only Li and Sn5Li22 phases supported by the mechanically strong carbon paper with a good conductivity; no impurity was observed in the XRD results. The synergy of the DTFEC additive and alloying with Sn provided composite anodes with significantly improved rate capability and remarkable stability owing to the formation of a dense fluorinated SEI layer with high mechanical strength and ion penetration. Moreover, with the porous SnLi alloy covered by a fluorinated protection layer, lithium avoids the intrinsic issues of uncontrollable volume expansion and dendrite growth, which restrict the practical application of Li metal, exhibiting a stabilized over-potential of only 90 mV after 100 cycles at 8 mA.cm(-2). Notably, stable cycling with a 12 mu L lean electrolyte was also observed at 5 mA.cm(-2). Overall, the prototype full cell assembled with the SnLi/Cp anode and NMC811 cathode exhibited a high Coulombic efficiency (98.1%) and remarkable cycling stability for 300 cycles at 1C (1.5 mA.cm(-2)). The rate capability was evaluated at various rates of 0.5C to 5C. Compared to pure Li, the SnLi/Cp anode in the full cell exhibited a higher capacity, particularly at a high rate (similar to 126 mAh.g(-1 )at 5C). Our approach provides integrated Li metal electrodes with effectively improved cycle stabilities and is very attractive for practical high-energy-density lithium batteries.

Three-dimensional micro-nanostructures based on binary transitional metal sulfides with doped carbon protector enabled high-performance and safe batteries

Designing of trimetallic-phase ternary metal sulfides coupled with N/S doped carbon protector for superior and safe Li/Na storage

Hierarchical Carbon Shell Compositing Microscale Silicon Skeleton As High-Performance Anodes for Lithium-Ion Batteries

Long-life SnS/TiO2/C stemming from nano-TiO2 @C complex hull as Li-ion battery anode

In Situ Encapsulation of SnS2/MoS2 Heterojunctions by Amphiphilic Graphene for High-Energy and Ultrastable Lithium-Ion Anodes

Highly reversible Na ion storage in N-doped polyhedral carbon-coated transition-metal chalcogenides by optimizing the nanostructure and surface engineering

Long-Cycling-Life Sodium-Ion Battery Using Binary Metal Sulfide Hybrid Nanocages as Anode

Catalytic chemistry inspired hollow carbon nanofibers loaded with NiS/Ni as high-performance and safe Li + reservoir

Multidimensional Synergistic Architecture of Ti3C2 MXene/CoS2@N-doped Carbon for Sodium-Ion Batteries with Ultralong Cycle Lifespan

Hierarchical Co3o4 Nanofiber-Carbon Sheet Skeleton With Superior Na/Li-Philic Property Enabling Highly Stable Alkali Metal Batteries

Metal sulfides encapsulated in doped carbon aerogel towards superior and safe energy storage: Two birds with one stone

Cobalt-Doped Hollow ZnS Polyhedrons@Porous Carbon Shell Composite Anode for High-Rate Sodium-Ion Batteries

Encapsulating Sulfides into Tridymite/Carbon Reactors Enables Stable Sodium Ion Conversion/Alloying Anode with High Initial Coulombic Efficiency Over 89%

Engineering of Yolk-Double Shell Cube-like SnS@N-S Codoped Carbon As a High-Performance Anode for Li- and Na-Ion Batteries

A Novel Hierarchical Structure of SnCu2Se4/d-Ti3C2Tx/NPC for a Lithium/Sodium Ion Battery and Hybrid Capacitor with Long-Term Cycling Stabilities

Improvement In Performance Of Three-Dimensional Snli/Carbon Paper Anode In Lean Electrolyte With In Situ Fluorinated Protection Layer

The Rational Design of Hierarchical MoS2 Nanosheet Hollow Spheres Sandwiched Between Carbon and TiO2@graphite As an Improved Anode for Lithium-Ion Batteries

Ultrathin MoS2 anchored on 3D carbon skeleton containing SnS quantum dots as a high-performance anode for advanced lithium ion batteries

Constructing Hierarchical MoS2/WS2 Heterostructures in Dual Carbon Layer for Enhanced Sodium Ions Batteries Performance

N-doped 3D carbon encapsulating nickel selenide nanoarchitecture with cation defect engineering: An ultrafast and long-life anode for sodium-ion batteries

Rationally engineering a binary SnS0.5Se0.5/carbon nest-coated Si nanosphere for high-performance lithium-ion battery anode