Abstract:One of the main challenges for the treatment of oily wastewater is emulsion separation. However, emulsions are generally more stable and difficult to separate. Herein, we report a facile strategy for the fabrication of monolithic oil/water separation materials by modifying melamine sponge with magnesium hydroxide (MH) coating, which can effectively separate immiscible oil/water mixtures and surfactant-stabilized emulsions. Its demulsification efficiency for the surfactant-stabilized emulsions can exceed 99.7%. In particular, the separation flux in a continuous emulsion separation system driven by a low-power pump can reach as high as 6.7 × 104 L m–2 h–1. MH particles coated on the surface of the sponge is one of the key factors for the formation of superhydrophobic surfaces and provide abundant adsorption sites for oil. Moreover, it was found that the surfactant added during the MH synthesis process not only affects the surface charge of MH but also interacts with the surfactant in the emulsion, which can promote instability and breaking of the oil/water interfacial film of emulsion.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.iecr.0c01276?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.iecr.0c01276</a>.Physical properties of the as-prepared samples (Table S1); schematic diagram of S-MH preparation (Figure S1); XRD patterns of as-prepared S-MH (Figure S2); FT-IR spectra of MH, SDBS, and S-MH (Figure S3); N2 adsorption–desorption isotherms and pore size distribution of S-MH (Figure S4); TEM images of (a) S-MH, (b) C-MH, and (c) MH (Figure S5); Effect of S-MH suspension concentration on water contact angle and sliding angle of S-MH/MS. (Figure S6); Effect of S-MH content in solution during synthesis on water contact angle of S-MH/MS S-MH/MS (Figure S7); separation of nonturbulent oil/water mixture and separation of turbulent oil/water mixture (Figure S8); photographs showing the preparation of emulsion (Figure S9); photographs showing the oil/water separation device (Figure S10); photographs showing the stability of surfactant-free emulsion (SF-E), CTAB-stabilized emulsion (CS-E) and SDS-stabilized emulsion (SS-E) (Figure S11); optical micrograph of surfactant-free emulsion (SF-E) and SDS-stabilized emulsion (SS-E) and histogram of the oil droplet size distribution in case of SF-E and SS-E (Figure S12); micrograph of the filtrate obtained by S-MH/MS separating SS-E and the particle distribution (Figure S13) (<a class="ext-link" href="/doi/suppl/10.1021/acs.iecr.0c01276/suppl_file/ie0c01276_si_001.pdf">PDF</a>)Process of S-MH/MS separating emulsion (CS-E) driven by gravity (<a class="ext-link" href="/doi/suppl/10.1021/acs.iecr.0c01276/suppl_file/ie0c01276_si_002.mp4">MP4</a>)Process of S-MH/MS separating emulsion driven by peristaltic pump (<a class="ext-link" href="/doi/suppl/10.1021/acs.iecr.0c01276/suppl_file/ie0c01276_si_003.mp4">MP4</a>)This article has not yet been cited by other publications.

Surface embedding enhancing interfacial photothermal effect of MXene/EP sponge for effective oil/water separation

Fabrication cellulose/epoxy sponge via surface embedding for efficient and continuously oil/water separation

Photothermal, Magnetic, and Superhydrophobic PU Sponge Decorated with a Fe3O4/MXene/Lignin Composite for Efficient Oil/Water Separation

Facile Preparation of Photothermal Superhydrophobic Melamine Sponge Decorated with MXene and Lignin Particles for Efficient Oil/Water Separation, Fast Crude Oil Recovery, and Active Deicing

Robust mussel-inspired superhydrophobic sponge with eco-friendly photothermal effect for crude oil/seawater separation

Superhydrophobic Co-MOF-based sponge for efficient oil-water separation utilizing photothermal effect

Multifunctional magnetic sponge with outstanding solar/electro-thermal performance for high-efficiency and all-day continuous cleanup of crude oil spills

Superhydrophobic and photothermal sponge for effective oil/water separation and solar‐assisted recovery of viscous oil

Photo/magneto-thermal assisted superhydrophobic sponge for efficient all-weather and continuous recovery of viscous crude oil

Multifunctional polypyrrole/MXene-wrapped sponge with synergistic solar and joule-heating effect for efficient adsorption and all-weather recovery of crude oil

Construction and Regulation of a Superhydrophobic Sponge via In Situ Anchoring of a Hyper-Cross-Linked Polymer for Efficient Oil/Water Separation

Nanoparticle-decorated and poly(dimethyl siloxane)-modified superhydrophobic melamine sponge for efficient oil/water separation

Superhydrophobic nanoporous polymer-modified sponge for in situ oil/water separation

Photothermal Ultra-high Molecular Weight Polyethylene/MXene Aerogel for Crude Oil Adsorption and Water Evaporation

Magnetic, self–heating and superhydrophobic sponge for solar–driven high–viscosity oil–water separation

3D Superhydrophobic Sponge Coated with Magnesium Hydroxide for Effective Oil/Water Mixture and Emulsion Separation

Eco-friendly bacterial cellulose/MXene aerogel with excellent photothermal and electrothermal conversion capabilities for efficient separation of crude oil/seawater mixture

Facile fabrication of compressible, magnetic and superhydrophobic poly(DVB-MMA) sponge for high-efficiency oil–water separation

Wood sponge with photothermal, magnetically driven, and superhydrophobic characteristics for high-viscosity oil–water separation

Novel Ti3C2Tx MXene wrapped wood sponges for fast cleanup of crude oil spills by outstanding Joule heating and photothermal effect

MXene sheets surface constructed a strong hydrogel coating for sustainable oily wastewater separation