Abstract:One of the main challenges for the treatment of oily wastewater is emulsion separation. However, emulsions are generally more stable and difficult to separate. Herein, we report a facile strategy for the fabrication of monolithic oil/water separation materials by modifying melamine sponge with magnesium hydroxide (MH) coating, which can effectively separate immiscible oil/water mixtures and surfactant-stabilized emulsions. Its demulsification efficiency for the surfactant-stabilized emulsions can exceed 99.7%. In particular, the separation flux in a continuous emulsion separation system driven by a low-power pump can reach as high as 6.7 × 104 L m–2 h–1. MH particles coated on the surface of the sponge is one of the key factors for the formation of superhydrophobic surfaces and provide abundant adsorption sites for oil. Moreover, it was found that the surfactant added during the MH synthesis process not only affects the surface charge of MH but also interacts with the surfactant in the emulsion, which can promote instability and breaking of the oil/water interfacial film of emulsion.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.iecr.0c01276?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.iecr.0c01276</a>.Physical properties of the as-prepared samples (Table S1); schematic diagram of S-MH preparation (Figure S1); XRD patterns of as-prepared S-MH (Figure S2); FT-IR spectra of MH, SDBS, and S-MH (Figure S3); N2 adsorption–desorption isotherms and pore size distribution of S-MH (Figure S4); TEM images of (a) S-MH, (b) C-MH, and (c) MH (Figure S5); Effect of S-MH suspension concentration on water contact angle and sliding angle of S-MH/MS. (Figure S6); Effect of S-MH content in solution during synthesis on water contact angle of S-MH/MS S-MH/MS (Figure S7); separation of nonturbulent oil/water mixture and separation of turbulent oil/water mixture (Figure S8); photographs showing the preparation of emulsion (Figure S9); photographs showing the oil/water separation device (Figure S10); photographs showing the stability of surfactant-free emulsion (SF-E), CTAB-stabilized emulsion (CS-E) and SDS-stabilized emulsion (SS-E) (Figure S11); optical micrograph of surfactant-free emulsion (SF-E) and SDS-stabilized emulsion (SS-E) and histogram of the oil droplet size distribution in case of SF-E and SS-E (Figure S12); micrograph of the filtrate obtained by S-MH/MS separating SS-E and the particle distribution (Figure S13) (<a class="ext-link" href="/doi/suppl/10.1021/acs.iecr.0c01276/suppl_file/ie0c01276_si_001.pdf">PDF</a>)Process of S-MH/MS separating emulsion (CS-E) driven by gravity (<a class="ext-link" href="/doi/suppl/10.1021/acs.iecr.0c01276/suppl_file/ie0c01276_si_002.mp4">MP4</a>)Process of S-MH/MS separating emulsion driven by peristaltic pump (<a class="ext-link" href="/doi/suppl/10.1021/acs.iecr.0c01276/suppl_file/ie0c01276_si_003.mp4">MP4</a>)This article has not yet been cited by other publications.

3D Superhydrophobic Sponge Coated with Magnesium Hydroxide for Effective Oil/Water Mixture and Emulsion Separation

Simple preparation superhydrophobic melamine sponge via one-step emulsion polymerization for continuous oil/water separation in harsh environment

Facile preparation of superhydrophobic melamine foam via one-pot emulsion polymerization for efficient oil/water separation

Superhydrophobic Graphene-Coated Sponge with Microcavities for High Efficiency Oil-in-water Emulsion Separation.

In situ modification of melamine sponge by MgAl-LDH with super-hydrophobicity and excellent harsh environment tolerance for high flux emulsion separation

Ultrastable superhydrophobic melamine sponge via a one-step aqueous solution-based approach for oil/water separation

Superhydrophilic and mixed-charge sponge: Revealing the mechanism of three-dimensional demulsification materials for oil-in-water emulsions under charge effect

Fabrication of Ph-Sensitive Superhydrophilic/Underwater Superoleophobic Poly(vinylidene Fluoride)-Graft-(sio2 Nanoparticles and PAMAM Dendrimers) Membranes for Oil-Water Separation.

Nanoparticle-decorated and poly(dimethyl siloxane)-modified superhydrophobic melamine sponge for efficient oil/water separation

Simple Amphoteric Charge Strategy to Reinforce Superhydrophilic Polyvinylidene Fluoride Membrane for Highly Efficient Separation of Various Surfactant-Stabilized Oil-in-Water Emulsions

P(MA-AMPS)/PVA@SiO 2 hybrid hydrogel coated stainless steel mesh for effective separation of stabilized oil-in-water emulsions under gravity

Facile Preparation of Photothermal Superhydrophobic Melamine Sponge Decorated with MXene and Lignin Particles for Efficient Oil/Water Separation, Fast Crude Oil Recovery, and Active Deicing

Superhydrophobic and photothermal sponge for effective oil/water separation and solar‐assisted recovery of viscous oil

Robust, fluorine-free and superhydrophobic composite melamine sponge modified with dual silanized SiO2 microspheres for oil–water separation

Preparation of a main-chain-type polybenzoxazine-modified melamine sponge via non-solvent-induced phase inversion for oil absorption and very-high-flux separation of water-in-oil emulsions

Robust Microcapsules with Durable Superhydrophobicity and Superoleophilicity for Efficient Oil–Water Separation

Facile Preparation of Smart Sponge Based on a Zeolitic Imidazolate Framework for the Efficient Separation of Oily Wastewater

Superhydrophobic magnetic hollow carbon microspheres with hierarchical micro/nano-structure for ultrafast and highly-efficient multitasking oil-water separation

Underoil superhydrophilic flame-retardant 3D porous composite for efficient on-demand emulsion separation: Interface engineering design on sphagnum moss

Three-dimensional hydrophobic melamine@methyl trichlorosilane/polydimethylsiloxane sponge for consecutive and long-term oil/water separation

A Durable Superhydrophobic Porous Polymer Coated Sponge for Efficient Separation of Immiscible Oil/water Mixtures and Oil-in-water Emulsions.