Robust Microcapsules with Durable Superhydrophobicity and Superoleophilicity for Efficient Oil–Water Separation

Wenjun Luo,Dawei Sun,Shusheng Chen,Logesh Shanmugam,Yong Xiang,Jinglei Yang
DOI: https://doi.org/10.1021/acsami.0c15455
2020-12-10
Abstract:The poor ultraviolet (UV) resistance and insufficient solvent compatibility are challenges for long-term storage and service of oil–water separation materials in practical applications. Herein, a superhydrophobic/superoleophilic surface with nano- to microscale hierarchical structures was formed spontaneously on robust microcapsules (MCs) via in situ polymerization and a sol–gel surface treatment. The resultant MCs possessed superior UV-resistant and solvent-proof superhydrophobicity. The water contact angles (WCAs) of the MC coating remained above 160° and the sliding angles (SAs) were below 3° after 9 days of UV aging test or 20 days of nonpolar and polar aprotic solvent immersion tests. More interestingly, these MCs can be used to separate the oil phase from its aqueous emulsion effectively, achieving a high and reusable separation efficiency with over 90% oil purity after 10 cycles of filtrations even after 13 days of UV aging. Therefore, these novel MCs will exhibit effective oil–water separation performance, superior chemical stability, outstanding reusability, and long-term storage stability for promising practical applications.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c15455?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c15455</a>.XPS spectra of untreated C<sub>16</sub>-IPDI MCs and sol–gel-treated C<sub>16</sub>-IPDI MCs; SEM images of the synthesized sol–gel-treated MCs: (a) overview of spherical-shaped sol–gel-treated MCs; (b) magnified image of single MC showing a rough outer shell; (c), (d), and (e) silica/ PUF nanoparticles deposited onto the surface of sol–gel-treated MCs, and (f) magnified image of SiO<sub>2</sub> nanoparticles on the PUF shell; 3D surface constructions of AFM and corresponding 2D images of (a,b) C<sub>16</sub>-IPDI MC surface and (c,d) sol–gel-treated MC surface. The scan area was 5 μm × 5 μm; surface roughness of untreated MC and treated MC coatings was investigated by optical profilometry with a scan area of 480 μm × 640 μm at different locations; particle size distribution of the sol–gel-treated MCs; scheme illustrating the separation process of the hexane–water mixture using the pipeline apparatus (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c15455/suppl_file/am0c15455_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.
materials science, multidisciplinary,nanoscience & nanotechnology
What problem does this paper attempt to address?