Abstract:Functional solid surfaces that can realize rapid shedding of liquid droplets have received significant research interest due to their close relevance to many industrial applications. Droplet impact on superhydrophobic surfaces with point-like protrusions has been demonstrated to take off as rings, which alters droplet impact dynamics and thus reduces contact time compared to flat surfaces. However, the essential role of the size ratio of protrusion-to-droplet (lambda) for droplets impinging on such surface is rarely considered. Here, we numerically investigate droplet impact on superhydrophobic surfaces with convex hemispherical shapes using a phase-field model coupled with dynamic contact angles. The postimpact outcome regimes occurring for varied lambda and Weber number (We) values, spanning 0 <= lambda <= 1.44 and 0.69 <= We <= 33.68, are mapped on a We-lambda diagram. Three distinct dynamic behaviours of droplet impact are identified: contactless bouncing, conventional bouncing, and ring bouncing. Detailed comparative analyses of these impact outcomes are also presented, including the evolution of droplet morphology, impact force, maximum impact pressure, pressure distribution, and velocity vector distribution. The results reveal a previously unknown phenomenon in contactless bouncing, where the impact force exhibits an initial increase followed by a subsequent decrease, while the maximum impact pressure remains approximately constant. Annular rotating retraction results in a longer contact time. Breakup occurs near the necked area, inducing a part of the droplet to depart from the surface as a jet. In addition, it is observed that the dimensionless maximum wetting area becomes independent of the lambda and follows a scaling law of 0.67We(3/5) if the We exceeds 2.75. Ring bouncing exclusively occurs within the range of 0.24 <=lambda <= 0.96 and We >= 24.74, resulting in an approximate 50 % reduction in non-dimensional contact time compared to conventional bouncing. These findings favor the understanding of the underlying mechanisms governing droplet impact and thereby provide available guidance to the design of superhydrophobic surfaces.

Double Droplets Impact an Inclined Superhydrophobic Surface

Rebound Behaviors of Multiple Droplets Simultaneously Impacting a Superhydrophobic Surface

Droplet Asymmetric Bouncing on Inclined Superhydrophobic Surfaces

Exploring Mechanisms of Asymmetric Droplet Impact Dynamics on Roughness Gradient Surface

Oblique Impact of Droplets on Microstructured Superhydrophobic Surfaces

Numerical study on the bouncing dynamics of droplets impacting on a macro-textured superhydrophobic surface

Contact Time of Double-Droplet Impacting Superhydrophobic Surfaces with Different Macrotextures

Off-center impact dynamics of a droplet against hydrophobic surfaces

Droplet Impact on Anisotropic Superhydrophobic Surfaces.

Lattice Boltzmann simulation of droplet impact dynamics on superhydrophobic surface decorated with triangular ridges

Successive impact of droplets on the superhydrophobic surface

Bouncing Dynamics of Droplets on Nanopillar-Arrayed Surfaces: the Effect of Impact Position.

Droplet Impact On Cross-Scale Cylindrical Superhydrophobic Surfaces

Coalescence and Rebound Dynamics in Two Droplets Train Impacting on a Heterogeneous Wettability Surface

Dynamical behavior of droplets transiently impacting on superhydrophobic microstructures

Impact Dynamics of a Droplet on Superhydrophobic Cylinders Structured with a Macro Ridge

The rebounding-coalescing behaviors in drop-on-drop impact on a superhydrophobic surface

Drop Impact on Oblique Superhydrophobic Surfaces with Two-Tier Roughness

Contact Time of Droplet Impact on Inclined Ridged Superhydrophobic Surfaces.

Droplet Impact Dynamics on Superhydrophobic Surfaces with Convex Hemispherical Shapes

Dynamic Behavior of Water Drops Impacting on Cylindrical Superhydrophobic Surfaces