Abstract:Previous studies have pointed out that adding a single protrusion on the superhydrophobic surface can effectively reduce the contact time of droplets, which is of practical importance in applications like anti-icing, self-cleaning, and anti-frost. However, the droplet impact dynamics and the mechanism for contact time reduction are still far from completely understood. Therefore, in this paper, via a three-dimensional pseudopotential lattice Boltzmann model coupled with a modified curved boundary scheme (which satisfies mass conservation), the droplet impact dynamics is simulated in a wide range of Weber numbers (0 < <math> We ≤</math> 67.7), protrusion size (10 <math> ≤</math> W <math> ≤</math> 30), and protrusion shape (triangle, square, and circle), with particular interest in understanding their effects on the contact time. We demonstrate that the variation of contact time depends on the bouncing type as well as the retraction way. Among three possible bouncing types observed in the simulation, including non-break bouncing, two droplets bouncing, and three droplets bouncing, two droplets bouncing has less contact time and could be facilitated by increasing We and using triangle protrusion. However, with increasing of W or using square protrusion, the bouncing type may change from two droplets bouncing to three droplets bouncing, and the deformation of fragments may become definitely different, leading to a long contact time. In addition, a transition from twice-retraction to once-retraction can be obtained by increasing We or making the protrusion shape sharp. When the fragments resulting from droplet splitting only retract once on the bottom wall, the contact time can be effectively reduced.

Impact Dynamics of a Droplet on Superhydrophobic Cylinders Structured with a Macro Ridge

Numerical study on the bouncing dynamics of droplets impacting on a macro-textured superhydrophobic surface

Double Droplets Impact an Inclined Superhydrophobic Surface

Off-center impact dynamics of a droplet against hydrophobic surfaces

Dynamical behavior of droplets transiently impacting on superhydrophobic microstructures

Reducing the contact time of off-center impacts

Contact Time of Droplet Impact on Inclined Ridged Superhydrophobic Surfaces.

Reduction in the contact time of droplet impact on superhydrophobic surface with protrusions

Axial Spreading of Droplet Impact on Ridged Superhydrophobic Surfaces

Splitting dynamics of droplet impact on ridged superhydrophobic surfaces

Lattice Boltzmann simulation of droplet impacting on the superhydrophobic surface with a suspended octagonal prism

Dynamic Behavior of Water Drops Impacting on Cylindrical Superhydrophobic Surfaces

Droplet breakup and rebound during impact on small cylindrical superhydrophobic targets

Re-touch rebound patterns and contact time for a droplet impacting a superhydrophobic cylinder

Droplet impact on a superhydrophobic solid substrate with a superhydrophilic annulus

Droplet Impact Dynamics on Single-Pillar Superhydrophobic Surfaces

Contact Time of Double-Droplet Impacting Superhydrophobic Surfaces with Different Macrotextures

Droplet rebound and dripping during impact on small superhydrophobic spheres

Effects of Ridge Parameters on Axial Spreading of Droplet Impact on Superhydrophobic Surfaces

Off-centered Droplet Impact on Single-Ridge Superhydrophobic Surfaces

Characteristics and mechanism of droplet bouncing on cross-ridge superhydrophobic surfaces: Simulations and theory