Abstract:CFMPs (cement and fly ash mixing piles) are used to reinforce fly ash foundation to solve the problem of a large amount of fly ash accumulation in coastal areas. CFMP-fly ash composite foundation is used as the foundation of coastal and coastal engineering. Through the indoor model test, the bearing characteristics and load transfer mechanism of CFMP-fly ash composite foundation under wave load were investigated. The results show that with the increase of wave load, the horizontal resistance of the fly ash stratum increases gradually, the soil resistance moves down, and the level of resistance shows nonlinear characteristics. The pile bending moment, pile displacement, and horizontal resistance of the CFMP composite foundation are concentrated in the upper pile and fly ash stratum, which can improve the ability of the composite foundation to resist horizontal load by improving the physical and mechanical properties of the upper fly ash stratum. Through the calculation of the load–displacement curve, it is found that the measured displacement value is closer to that obtained using the p – y curve method (a method for solving nonlinear lateral resistance of piles). The hysteretic curve area of cyclic loading decreases with the increase of cyclic number. The accumulation of elastoplastic deformation of pile shows that the properties of fly ash gradually change to elastic stage, cyclic loading can reduce the horizontal deformation modulus of composite foundation CFMP caused pile—fly ash system of weakening, in peak load reaches level under the critical state displacement curve showed a trend of the rapid growth of nonlinear, cyclic cumulative failure occurs, and the cyclic load limit state is reached, which affects the service performance of the whole structure.

Mechanism of Rapid Curing Pile Formation on Shoal Foundation and Its Bearing Characteristic

Effect of Loading Rate on Lateral Pile-Soil Interaction in Sand Considering Partially Drained Condition

Experimental Analysis of Bearing Capacity of Cast-in-place Tubular Pile

Behavior of Sand Filled Nodular Piles under Compression in Soft Soil Areas

Experimental study on the durability of cement-stabilized soil for post-grouted piles in calcareous sand under marine environment

Laboratory Model Study on the Pile-Forming Mechanisms and Bearing Deformation Characteristics of CFA Piles

Influence of Vacuum Preloading on Vertical Bearing Capacities of Piles Installed on Coastal Soft Soil

Experimental Study Of The Rigid-Flexible Pile Composite Foundation

Field Test on the Influence of the Cemented Soil Around the Pile on the Lateral Bearing Capacity of Pile Foundation

Dynamic Response of Cement–Fly Ash Mixed Pile Composite Foundation Under Wave Load

Field Study of Bearing Behavior of Pile-Net Composite Foundation

The engineering characteristic of precast tubular pile and mixing cement pile composite foundation for deep soft ground

Influence of Soil Reinforcement on the Uplift Bearing Capacity of a Pre-Stressed High-Strength Concrete Pile Embedded in Clayey Soil

Field Behavior of Driven Prestressed High-Strength Concrete Piles in Sandy Soils

A method of calculating the bearing capacity of sand pile composite foundations in a mucky soil layer considering consolidation

Experimental Study on Friction Capacity of Pile-Stabilized Soil Interface

Engineering Characteristics Of Composite Foundation With Rigid-Flexible And Long-Short Piles

A test on base bearing capacity of static drill rooted nodular pile

Mechanical behavior analysis and bearing capacity calculation of CFG pile composite foundation on coral sand site

Deterioration Effect of Soil-cement Pile Under Saltwater Environment and Its Influence on Composite Foundation Settlement of Road

Experimental study on vertical bearing performance of base post-grouted cast-in-place plies in soft soils