Abstract:Fused deposition modelling (FDM) is a popular additive manufacturing process used for rapid prototyping and the production of complex geometries. Despite its popularity, FDM's susceptibility to variations in numerous process parameters can significantly impact the quality, design, functionality, and mechanical properties of 3D printed parts. This study explores thirteen FDM process parameters and their influence on the mechanical properties of polylactic acid (PLA) polymer, encompassing surface roughness, warpage, tensile and bending strength, elongation at break, deformation, and microhardness. The optimum parameters were identified alongside key contributors by applying the Taguchi method, signal-to-noise ratios, and analysis of variances (ANOVA). Notably, specific FDM parameters significantly affect the surface profile, with layer thickness contributing 32.65% and fan speed contributing 8.59% to the observed variations. Similarly, warping values show notable influence from nozzle temperature (29.53%), wall thickness (16.74%), layer thickness (16.56%), and retraction distance (12.80%). Tensile strength is primarily determined by wall thickness (31.83%), followed by infill percentage (26.73%) and infill pattern (16.18%). Elongation at break predominantly correlates with wall thickness (44.82%), with a supplementary contribution from nozzle temperature (10.90%). Microhardness lacks a dominant parameter. Bending strength variations primarily arise from layer thickness (38%), wall thickness (37.6%), and infill percentage (9.17%). Deformation tendencies are influenced by layer thickness (19.20%), print speed (11.37%), wall thickness, and fan speed (10.9% each). The optimized dataset of FDM process parameters was then employed in two prediction models: multiple-regression and artificial neural network (ANN). Evaluation based on the correlation coefficient (R2) and root mean squared error (RMSE) indicates that the ANN model outperforms the multiple-regression approach. The results indicate that precise control of FDM parameters, coupled with ANN predictions, facilitates the fabrication of 3D-printed parts with the desired mechanical characteristics.

Non-puerperal induced lactation.

Single and Multi-objective Optimization of Processing Parameters for Fused Deposition Modeling in 3D Printing Technology

Optimization of printing parameters in fused deposition modeling for improving part quality and process sustainability

Optimization of fused deposition modeling process parameters: a review of current research and future prospects

OPTIMIZATION OF ANNEALING AND 3D PRINTING PROCESS PARAMETERS OF PLA PARTS

Optimization of fused deposition modeling parameters to fabricate morphogenesis light weight structure with high tensile and compression strength

Optimization of Tensile Strength and Cost-Effectiveness of Polyethylene Terephthalate Glycol in Fused Deposition Modeling Using the Taguchi Method and Analysis of Variance

Parametric Optimization of Fused Deposition Modelling (FDM) Process Using PSO Algorithm

A response surface methodology investigation into the optimization of manufacturing time and quality for FFF 3D printed PLA parts

Experimental study and optimizing the FDM process using war strategy optimization technique to enhance mechanical properties and surface quality of the PLA thermoplastic

Building Orientation Determination Based On Multi-Objective Optimization For Additive Manufacturing

Optimizing FDM process parameters: predictive insights through taguchi, regression, and neural networks

Experimental analysis and optimization of mechanical properties of FDM-processed polylactic acid using Taguchi design of experiment

Optimization of Fused Deposition Modelling Acrylonitrile-co-Butadiene-co-Styrene Parameters using ANOVA and Hybrid GRA–TOPSIS

Analyzing Sustainable 3D Printing Processes: Mechanical, Thermal, and Crystallographic Insights

Experimental Study of the Tensile Behavior of Structures Obtained by FDM 3D Printing Process

Optimize Process Parameter of FDM Techniques to Improve Mechanical Properties of Aerospace Application

Parametric Optimization of FDM Process for PA12-CF Parts Using Integrated Response Surface Methodology, Grey Relational Analysis, and Grey Wolf Optimization

Optimization of Fused Deposition Modeling Process Parameters and Dynamic Mechanical Analysis of 3D Printed Polycarbonate/Acrylonitrile-Butadiene-Styrene Composite Loaded with Tetrabromobiphenol-A and Microcrystalline Cellulose

Optimization of tensile strength in 3D printed PLA parts via meta-heuristic approaches: a comparative study

Optimization of fused deposition modeling process parameters using the Taguchi method to improve the tensile properties of 3D-printed polyether ether ketone