Activator protein required for the enzymatic hydrolysis of cerebroside sulfate. Deficiency in urine of patients affected with cerebroside sulfatase activator deficiency and identity with activators for the enzymatic hydrolysis of GM1 ganglioside and globotriaosylceramide.

S. Li,H. Kihara,S. Serizawa,Y. Li,A. Fluharty,J. Mayes,L. Shapiro

DOI: https://doi.org/10.1016/s0021-9258(18)89673-9

IF: 5.485

1985-02-10

Journal of Biological Chemistry

Abstract:

What problem does this paper attempt to address?

Oxygen Self-Doping Bi2S3@C Spheric Successfully Enhanced Long-Term Performance in Lithium-Ion Batteries

Xiaojing Zhang,Jing Xie,Yakun Tang,Zhenjiang Lu,Jindou Hu,Yang Wang,Yali Cao

DOI: https://doi.org/10.1021/acsami.4c11172

2024-10-02

Abstract:High theoretical capacity of Bi2S3 propels it toward an ideal anode material for lithium-ion batteries (LIBs); however, rapid capacity attenuation and poor long-term stability are major barriers to widespread application. In this work, an oxygen self-doping strategy was utilized to synthesize O-Bi2S3@C, significantly increasing the amount of active sites for lithium-ion storage. Meanwhile, sulfur vacancies were formed to improve the electrical conductivity and ionic transport efficiency, enhance the long-term stability, and accelerate the electrochemical kinetics of Bi2S3@C. O-BSC-S1:3 anode exhibits a reversible capacity of 673.1 mAh g-1 at 0.2 A g-1. It retains a long-term capacity of 596.3 mAh g-1 over 1100 cycles at a high density of 3 A g-1 in LIBs. Moreover, the installed O-Bi2S3@C//LiCoO2 full battery offers exceptional reversible capacity and remarkable cyclability (325.2 mAh g-1 after 200 cycles) at 0.2 A g-1. The combined strategy of oxygen self-doping and sulfur vacancy effectively enhances the reversible capacity and cycling life of Bi2S3, providing an approach for the design of high-performance transition metal sulfide anodes for LIBs.
Without Dissolvent: Fast Inducing Cable‐Like Sb2S3@C from Natural Minerals with Enhanced Preferential Planes and Sulfur‐Defects Toward High‐Rate Properties

Zhengqiao Yuan,Wenqing Zhao,Zihao Zeng,Jiexiang Li,Bin Wang,Hai Lei,Yue Yang,Peng Ge,Xiaobo Ji,Wei Sun

DOI: https://doi.org/10.1002/adfm.202406116

IF: 19

2024-06-23

Advanced Functional Materials

Abstract:Supported by the simple thermal‐chemical treatment, the cable‐like SS@C‐x anodes can be prepared, displaying abundant S vacancies and (hk1) preferred orientation. Especially, the as‐optimized sample (SS@C‐18) displayed outstanding reversible capacity of 603.7 mAh g−1 after 100 cycles at 1.0 A g−1 and attractive rate ability (436.1 mAh g−1 at 10.0 A g−1). Developing novel anodes with outstanding fast‐charging properties is crucial for next‐generation energy storage research. Sb2S3 materials are deemed promising electrodes due to their high theoretical specific capacity. However, they are restricted by sluggish bulk‐phase kinetics, bringing about inferior electronic conductivity at high current density. In this work, the cable‐like SS@C‐x anodes are successfully prepared via the thermal‐chemical treatment method. Through the tailoring of habit modifiers, their unique core–shell architectures are induced with (hk1) preferential planes and the construction of S‐defects, accompanied by lowered energy barriers. Meanwhile, assisted by C─S and C─O─Sb bonds, the charge accumulation on the surface can be rapidly released toward the bulk phase. As expected, for the as‐optimized samples, the capacity of 603.7 mAh g−1 can remain after 100 cycles at 1.0 A g−1. Even at 10.0 A g−1, their superior capacity of 436.1 mAh g−1 can be noted, and it still displayed the reversible capacity of 479 mAh g−1 at −5 °C. Assisted by kinetic analysis, the great electrochemical properties mainly come from the reduced migration energy barriers and accelerated Li+ diffusion rates. Given this, the work is expected to shed light on crystal orientation tuning and defect engineering for advanced metal‐based energy storage materials.

materials science, multidisciplinary,nanoscience & nanotechnology,physics, applied,chemistry, physical, condensed matter
Metallic and Polar Co 9 S 8 Inlaid Carbon Hollow Nanopolyhedra As Efficient Polysulfide Mediator for Lithium−sulfur Batteries

Tao Chen,Lianbo Ma,Baorui Cheng,Renpeng Chen,Yi Hu,Guoyin Zhu,Yanrong Wang,Jia Liang,Zuoxiu Tie,Jie Liu,Zhong Jin

DOI: https://doi.org/10.1016/j.nanoen.2017.05.064

IF: 17.6

2017-01-01

Nano Energy

Abstract:Lithium−sulfur (Li−S) batteries are promising to replace current commercial Li−ion batteries due to the high energy density. Despite this, the poor cyclic stability induced by the shuttle effect of electrolyte-soluble intermediate polysulfides is one of the great obstacles for the application of Li−S batteries. To overcome this issue, here we report a self-template synthesis of metallic and polar Co9S8 nanocrystals inlaid carbon (Co9S8/C) hollow nanopolyhedra as an efficient sulfur host material. The Co9S8/C hollow nanopolyhedra with large inner space can ensure the loading mass of sulfur and buffer the volume expansion of Li2Sx species during cycling; while the metallic and polar Co9S8/C shell offers synergetic spatial confinement and chemical binding to immobilize polysulfides and prevent the shutting effect. The Co9S8/C-S composite cathode exhibits high capacity and long cycle life with a low capacity decay of 0.041% per cycle over 1000 cycles at 2.0C. When the areal sulfur content is as high as 3.0mgcm–2, the Co9S8/C-S cathode still maintains high cycling stability.
Vanadium nitride nanocrystals decorated ultrathin, N-rich and hierarchically porous carbon nanosheets as superior polysulfides mediator for stable lithium-sulfur batteries

Guochang Ruan,Yirun Shen,Jun Yao,Yiwen Huang,Siyuan Yang,Sijiang Hu,Hongqiang Wang,Yueping Fang,Xin Cai

DOI: https://doi.org/10.1016/j.jpowsour.2023.232922

IF: 9.2

2023-03-15

Journal of Power Sources

Abstract:The diligent exploitation of high-efficiency polysulfides mediators have exhibited enormous prospects to promote the cycling performance of lithium-sulfur (Li–S) batteries with desirable sulfur loading and high sulfur utilization efficiency. Herein, we craft an elaborated catalyst of ultrafine vanadium nitride nanocrystals confined hierarchically porous, ultrathin nitrogen-doped carbon nanosheets (denoted as ) via a simple approach. Owing to the highly conductive porous carbon framework integrated with enriched V – N – C active sites, well-heterostructured can actively favor the entrapping – adsorption – catalytic conversion of the polysulfides intermediates for boosted surface redox kinetics. As the separator interlayer, dedicates to high-performance Li–S batteries with high discharge capacities (1594.8 mAh g −1 at 0.1 C), excellent rate capabilities (766.5 mAh g −1 at 5.0 C) and exceptional cyclic durability by a slight decay of 0.067% per cycle upon 500 cycles at 1.0 C. Interestingly, two cycled Li–S batteries after 100 cycles at 0.5 C can be connected to charge a daily smartphone. Even under elevated sulfur loading of 4.5 mg cm −2 and lean electrolyte of 8 μL mg −1 , the assembled Li–S battery still maintains a stable cycling performance. The cost-effective catalyst could offer a viable avenue to construct applicable sulfur catalysts for advanced Li–S batteries.

energy & fuels,materials science, multidisciplinary,electrochemistry,chemistry, physical
Cobalt-zinc carbides embedded in N-doped porous carbon nanospheres as polysulfide mediators for efficient lithium-sulfur batteries

Xiangyu Tan,Jiajun Du,Haitao Wu,Xuyu Ma,Chunbo Zhou,Fangrong Zhou,Caijin Fan,Xueqin Xu,Shaocong Hou,Xin Cai

DOI: https://doi.org/10.1039/d4ra04657a

2024-09-18

Abstract:Developing high-efficiency interlayer catalysts is a promising tactic for improving the cycling performance of rechargeable lithium-sulfur (Li-S) batteries. Herein, using the Prussian blue analogue as the precursor, cobalt-zinc carbide nanocrystal-embedded N-doped porous carbon (Co3ZnC@NC) is synthesized via simple post-carbonization. The obtained Co3ZnC@NC nanospheres exhibit a robust core-shell structure showing good conductivity, high porosity and available metal active sites, favoring the interfacial charge transfer and the electron transport upon electrochemical reactions. The results demonstrate that the Co3ZnC@NC catalyst is quite suitable for boosting the adsorption and redox conversion kinetics of soluble polysulfides. When acting as the separator interlayer, Co3ZnC@NC contributes to improved Li-S batteries with a high discharge specific capacity of 1659.8 mA h g-1 at 0.1C and superior cycling stability of over 250 cycles at 1.0C (high capacity retention of 84.1% after 100 cycles at 0.5C). Furthermore, the Co3ZnC@NC-based battery can maintain a high discharge capacity of 734.0 mA h g-1 at 5.0C, along with delivering a stable reversible capacity of 805.4 mA h g-1 (∼5 mA h cm-2) after 50 cycles even under a high sulfur loading of 6.2 mg cm-2. This study affords a viable way to construct highly dispersed bimetal/carbon composites for efficient catalysts and renewable energy devices.
Facile Synthesis of Porous Li2S@C Composites As Cathode Materials for Lithium–sulfur Batteries

Sheng Liang,Chu Liang,Yang Xia,Haohui Xu,Hui Huang,Xinyong Tao,Yongping Gan,Wenkui Zhang

DOI: https://doi.org/10.1016/j.jpowsour.2015.12.030

IF: 9.2

2016-01-01

Journal of Power Sources

Abstract:Lithium sulfide (Li2S) is regarded as a promising cathode material for lithium-sulfur (Li-S) batteries in terms of its high theoretical specific capacity of 1166 mAh g(-1) and good compatibility with lithium metal-free anodes. However, Li2S suffers from poor cycling stability and rate capability resulted from the serious shuttle effect of lithium polysulfides and its low electronic and ionic conductivity. Here, we present a facile ball milling combined with carbon coating method to synthesize porous carbon-coated Li2S (Li2S@C) composites with a high Li2S content by using polystyrene (PS) as a carbon precursor. The Li2S@C composites show a high reversible specific capacity of 676 mAh g(-1) (equal to 971 mAh g(-1) sulfur) after 3 cycles at the current density of 0.1 A g(-1), superior cycling stability with an average decay rate of 0.18% per cycle over 200 cycles, and improved rate capability of 416 mAh g(-1) at the current density of 1.0 A g(-1). The enhanced electrochemical properties of Li2S can be attributed to the porosity and core-shell structure of the Li2S@C composites, which increased the electronic and ionic conductivity of Li2S and alleviated the shuttle effect of intermediate lithium polysulfides in the discharge/charge process. (C) 2015 Elsevier B.V. All rights reserved.
Bi2S3–CoS@C core- shell structure derived from ZIF-67 as anodes for high performance lithium-ion batteries

Xiangju Chen,Peng Wang,Zhiwei Zhang,Longwei Yin

DOI: https://doi.org/10.1016/j.jallcom.2020.156008

IF: 6.2

2020-12-01

Journal of Alloys and Compounds

Abstract:The combination of multiple active components and engineering of reasonable structures are effective strategies to prepare high-performance electrochemical electrodes. Herein, a specially designed Bi2S3–CoS@C core-shell structure is synthesized using ZIF-67 as a template, in which nanoparticles of Bi2S3 and CoS in the composites are surrounded by a carbon layer with a sufficient amount of hollow space. This structure is conducive to the transport of ions, an increase in the conductivity and accommodating the volume change of the active materials during cycling. When applied as an anode for lithium-ion batteries, the Bi2S3–CoS@C electrode exhibits excellent electrochemical properties, displaying an excellent specific capacity of 1390 mAh g−1 at a current density of 100 mA g−1 after 100 cycles. During a long cycling test, an excellent reversible capacity of 836.2 mAh g−1 can also be obtained at a high current density of 1 A g−1 after 300 cycles. This work sheds light on an efficient approach to build novel high-performance electrodes for energy devices.

materials science, multidisciplinary,chemistry, physical,metallurgy & metallurgical engineering
One-pot Facile Fabrication of Carbon-Coated Bi2S3 Nanomeshes with Efficient Li-storage Capability

Yang Zhao,Dongliang Gao,Jiangfeng Ni,Lijun Gao,Juan Yang,Yan Li

DOI: https://doi.org/10.1007/s12274-014-0437-8

IF: 9.9

2014-01-01

Nano Research

Abstract:Layered bismuth sulfide (Bi 2 S 3 ) has emerged as an important type of Li-storage material due to its high theoretical capacity and intriguing reaction mechanism. The engineering and fabrication of Bi 2 S 3 materials with large capacity and stable cyclability via a facile approach is essential, but still remains a great challenge. Herein, we employ a one-pot hydrothermal route to fabricate carbon-coated Bi 2 S 3 nanomeshes (Bi 2 S 3 /C) as an efficient Li-storage material. The nanomeshes serve as a highly conducting and porous scaffold facilitating electron and ion transport, while the carbon coating layer provides flexible space for efficient reduction of mechanical strain upon electrochemical cycling. Consequently, the fabricated Bi 2 S 3 /C exhibits a high and stable capacity delivery in the 0.01–2.5 V region, notably outperforming previously reported Bi 2 S 3 materials. It is able to discharge 472 mA·h·g −1 at 120 mA·g −1 over 50 full cycles, and to retain 301 mA·h·g −1 in the 40th cycle at 600 mA·g −1 , demonstrating the potential of Bi 2 S 3 as electrode materials for rechargeable batteries.
Quantitative defect regulation of heterostructures for sulfur catalysis toward fast and long lifespan lithium-sulfur batteries

Saisai Qiu,Xinqi Liang,Shuwen Niu,Qingguo Chen,Gongming Wang,Minghua Chen

DOI: https://doi.org/10.1007/s12274-022-4453-9

IF: 9.9

2022-06-08

Nano Research

Abstract:The advancement of lithium-sulfur (Li-S) batteries is severely retarded by lithium polysulfides (LiPSs) shuttling behavior and sluggish redox kinetics. Herein, the heterogeneous composite with defective Bi 2 Se 3− x nanosheets and porous nitrogen-doped carbon (Bi 2 Se 3− x /NC) is prepared by selenizing bismuth metal-organic frameworks as a multifunctional sulfur host. The highly efficient immobilization-conversion on LiPSs is realized by the synergistic effect of structure construction strategy and defect engineering. It is found that Bi 2 Se 3− x with the suitable amount of selenium vacancies achieves the best electrochemical performance due to the advantages of its structure and composition. These results confirm the intrinsic correlation between defects and catalysis, which are revealed by computational and experimental studies. Due to these superiorities, the developed sulfur electrodes exhibited admirable stability and a fairly lower capacity decay rate of approximately 0.0278% per cycle over 1,000 cycles at a 3 C rate. Even at the high sulfur loading of 6.2 mg·cm −2 , the cathode still demonstrates a high discharge capacity of 455 mAh·g −1 at 1 C. This work may enlighten the development of mechanism investigation and design principles regarding sulfur catalysis toward high-performance Li-S batteries.

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
Engineering checkerboard-like heterostructured sulfur electrocatalyst towards high-performance lithium sulfur batteries

Yafei Xue,Dan Luo,Na Yang,Ge Ma,Zhen Zhang,Junfeng Hou,Jiantao Wang,Chuyin Ma,Xin Wang,Mingliang Jin,Zhongwei Chen,Lingling Shui

DOI: https://doi.org/10.1016/j.cej.2022.135990

IF: 15.1

2022-07-01

Chemical Engineering Journal

Abstract:Lithium-sulfur (Li-S) batteries are showing a huge potentiality in the energy storage market owing to its high theoretical energy density and cost-effectiveness. However, there are still some thorny issues needed to be tackled before realizing their practical applications, including underperformed rate capability and unsatisfactory cycling stability. Herein, we have constructed the checkerboard-like heterostructured CoS2/Co nanoparticle inside porous carbon by the electrochemically-sulfonated reaction of lithium polysulfides (LiPS) and used them as sulfur electrocatalyst. Benefiting from this structure advantage, the catalyst can not only promote the chemical adsorption of LiPS, but also acts as promoter to provide coupled electrons to accelerate its redox reaction. Through synergistic enhancement, the checkerboard-like CoS2/Co heterostructure provides a boosted chemical adsorption and accelerated catalytic conversion of LiPS, rendering suppressed shuttle effect and enhanced Li-S kinetics. In addition, the porous carbon carriers offer abundant nanoscale pores to effectively immobilize sulfur and accommodate its volume expansion. Therefore, the CoS2/Co sulfur composites exhibit decent rate capability up to 5C and long-term cycling performance over 500 cycles at 1C with a capacity fading rate below 0.059% per cycle. Moreover, an admirable cyclic stability can also be achieved under raised sulfur loading of 7.13 mg∙cm−2 and low E/S ratio of 4.5 mL∙g−1.

engineering, chemical, environmental
Engineering the Conductive Network of Metal Oxide‐Based Sulfur Cathode toward Efficient and Longevous Lithium–Sulfur Batteries

Jiayi Wang,Gaoran Li,Dan Luo,Yongguang Zhang,Yan Zhao,Guofu Zhou,Lingling Shui,Xin Wang,Zhongwei Chen

DOI: https://doi.org/10.1002/aenm.202002076

IF: 27.8

2020-09-27

Advanced Energy Materials

Abstract:The rational design of sulfur cathode structure to suppress shuttling behaviors and expedite the conversion kinetics of polysulfides plays an essential role for the practical implementation of lithium–sulfur (Li–S) batteries. In this work, a unique consecutive and oxygen‐deficient niobium oxide (Nb2O5−x) framework featured with 3D ordered macroporous (3DOM) architecture and carbon nanotubes (CNTs) embedding is developed, which serves as a high‐performance sulfur immobilizer and catalytic promoter for polysulfide conversion. The 3DOM architecture affords a robust porous and open framework that favors electrolyte infiltration for fast ion/mass transfer, as well as interface exposure for massive host–guest interactions. More importantly, CNTs are designed as "antennae" embedded within the Nb2O5−x skeleton, which not only contributes to a highly conductive framework but also intensifies the oxygen deficiency with enhanced sulfur immobilization and reaction catalyzation. Benefiting from these advanced features, Li–S cells based on S‐Nb2O5−x/CNTs cathode achieve excellent cyclability with a high capacity retention of 847 mAh g−1 after 500 cycles and remarkable rate capability with 741 mAh g−1 at 5 C. Moreover, a high areal capacity of 6.07 mAh cm−2 can also be achieved under a high sulfur loading of 6 mg cm−2, illustrating great potential in the development of practical Li–S batteries.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,energy & fuels
Catalytic Boosting Bidirectional Polysulfide Redox using Co 0.85 Se/C Hollow Structure for High‐Performance Lithium‐Sulfur Batteries

Xingyuan Zhang,Honghui Gu,Chao Shen,Bingqing Wei,Jian‐Gan Wang

DOI: https://doi.org/10.1002/celc.202101557

IF: 4

2022-02-17

ChemElectroChem

Abstract:Achieving effective adsorption and fast conversion of soluble polysulfides confined in the sulfur cathode is critical yet challenging for building high‐performance lithium‐sulfur batteries. Herein, we construct a unique hollow‐structured Co0.85Se/C as a separator modifier (CSPP) to effectively suppress the polysulfide shuttle effect. The Co0.85Se/C demonstrates strong anchoring with polysulfide species and smooth bidirectional electrocatalysis. The unique mesoporous hollow architecture affords sufficient catalytic sites and Li+ diffusion channels for promoting the reaction kinetics. Benefiting from the merits, the CSPP‐cell could yield a superior electrochemical utilization of active sulfur, excellent rate capability (679 mAh g−1 at 5 C), and stable cycling performance with an ultralow fading rate of 0.056 % per cycle over 500 cycles. The work highlights great promise of developing cobalt‐based materials as kinetic regulators for highly stable lithium‐sulfur batteries. Coming from both sides: A unique hollow‐structured Co0.85Se/C material is demonstrated as an excellent bidirectional electrocatalyst to effectively suppress the polysulfide shuttle effect and kinetically promote the sulfur redox electrochemistry. The Co0.85Se/C enables the sulfur cathode to show very good specific capacity, excellent rate capability, and stable cycling performance.

electrochemistry
Promoting polysulfide conversions via cobalt single-atom catalyst for fast and durable lithium-sulfur batteries

Ziwei Wang,Yuwen Cheng,Shanying Wang,Jie Xu,Bo Peng,Dan Luo,Lianbo Ma

DOI: https://doi.org/10.1007/s12274-023-5557-6

IF: 9.9

2023-03-14

Nano Research

Abstract:Although promising strategies have been developed to resolve the critical drawbacks of lithium-sulfur (Li-S) batteries, the intractable issues including undesirable shuttling of polysulfides and sluggish redox reaction kinetics have still been unresolved thoroughly. Herein, a cobalt single-atom (CoSA) catalyst comprising of atomic Co distributed homogeneously within nitrogen (N)-doped porous carbon (Co-NPC) nanosphere is constructed and utilized as a separator coating in Li-S batteries. The Co-NPC exposes abundant active sites participating in sulfur redox reactions, and remarkable catalytic activity boosting the rapid polysulfide conversions. As a result, Li-S batteries with Co-NPC coating layer realize significantly enhanced specific capacity (1295 mAh·g −1 at 0.2 C), rate capability (753 mAh·g −1 at 3.0 C), and long-life cyclic stability (601 mAh·g −1 after 500 cycles at 1.0 C). Increasing the areal sulfur loading to 6.2 mg·cm −2 , an extremely high areal capacity of 7.92 mAh·cm −2 is achieved. Further in situ X-ray diffraction, density functional theory calculations, and secondary ion mass spectrometry confirm the high catalytic capability of CoSA towards reversible polysulfide conversion. This study supplies new insights for adopting single-atom catalyst to upgrade the electrochemical performance of Li-S batteries.

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
Active Sulfur-Host Material VS4 with Surface Defect Engineering: Intercalation-Conversion Hybrid Cathode Boosting Electrochemical Performance of Li-S Batteries

Yutao Dong,Ran Zhang,Huaiqi Peng,Dandan Han,Xianfu Zheng,Yumiao Han,Jianmin Zhang

DOI: https://doi.org/10.1021/acsami.2c06067

2022-07-20

Abstract:Transition-metal sulfides as late-model electrocatalysts usually remain inactive in lithium-sulfur (Li-S) batteries in spite of their advantages to accelerate the rapid conversion of lithium polysulfides (LiPSs). Herein, a series of cobalt-doped vanadium tetrasulfide/reduced graphene oxide (x%Co-VS4/rGO) composites with an ultrathin layered structure as an active sulfur-host material are prepared by a one-pot hydrothermal method. The well-designed two-dimensional ultrathin 3%Co-VS4/rGO with heteroatom architecture defects (defect of Co-doping and defect of S-vacancies) can significantly improve the adsorption ability on LiPSs, the electrocatalytic activity in the Li2S potentiostatic deposition, and the active sulfur reduction/oxidation conversion reactions and greatly boost the electrochemical performances of Li-S batteries. On the one hand, the ultrathin 3%Co-VS4/rGO possesses good conductivity inheriting from rGO which contributes to the capacity of internal redox reactions on lithiation from VS4. On the other hand, the hybrid architectures provide strong adsorption and excellent electrocatalytic ability on LiPSs, which benefit from the surface defects caused by heteroatom doping. The S@3%Co-VS4/rGO cathode displays a high specific capacity of 1332.6 mA h g-1 at 0.2 C and a low-capacity decay of only 0.05% per cycle over 1000 cycles at 3 C with a primary capacity of 633.1 mA h g-1. Furthermore, when the sulfur loading (single-side coating) reaches 4.48 mg cm-2, it still can deliver 756.2 mA h g-1 after the 100th cycle at 0.2 C with 89.5% capacity retention. In addition, the in situ X-ray diffraction test reveals that the sulfur conversion mechanism is the processes of α-S8 → Li2S → β-S8 (first cycle) and then β-S8 ↔ Li2S during the subsequent cycles. The designing strategy with heteroatom doping and self-intercalation capacity adopted in this work would provide novel inspiration for fabricating advanced sulfur-host materials to achieve excellent electrochemical capability in Li-S batteries.
Synthesis of CoO Nanocrystals Decorated Porous Carbon Nanotube Microspheres As Sulfur Host for High Performance Li/S Batteries.

Jiayi Wang,Wenjuan Wang,Yongguang Zhang,Yong Wang,Yan Zhao

DOI: https://doi.org/10.1088/1361-6528/ab475b

IF: 3.5

2019-01-01

Nanotechnology

Abstract:Lithium-sulfur (Li/S) batteries are promising portable energy storage devices if the defects of insufficient conductivity and obvious shuttle effect can be effectively suppressed. In this work, a unique caddice-like ball carbon nanotubes/CoO (CNTs/CoO) microspheres have been synthesized through a facile spray drying and following calcination method. By using cobalt acetate (Co(CHCOO)2) as a cobalt source, polymethyl methacrylate (PMMA) as a pore former and CNTs as the supporting frame, the as-prepared CNTs/CoO microspheres endowed with enriched interconnected pores and abundant scattered CoO nanoparticles on CNT walls. CNTs provided physical adsorption platforms for adsorption of polysulfides while ensuring the conductivity of the overall material. Polycrystalline CoO nanoparticles are uniformly deposited on CNT walls, providing additional confinement of polysulfides by strong chemical adsorption. In addition, the different content of CoO in the microspheres was regulated by the amount of added cobalt source during the preparation process. With both physical entrapment by CNTs and strong chemical interaction with CoO nanocrystals, this unique design can effectively promote the active material utilization and inhibit the shuttle effect. When employed as the sulfur host, an excellent electrochemical performance was achieved on the resulting sulfur-impregnated CNTs/CoO (S-CNTs/CoO) composite with the sulfur content of 73.0%. The obtained S-CNTs/CoO microspheres delivered an exceptional initial discharge capacity of 1340 mAh g-1 and a prominent cycling stability of 1116 mAh g-1 after 100 cycles at 0.2 C, as well as a superb rate capability of 600 mAh g-1 and 506 mAh g-1 at 2.0 C and 3.0 C, respectively. The results revealed that the S-CNTs/CoO composite was an enviable cathode material and showed an excellent potentiality in the application of Li/S batteries.
Engineering Vacancy-Defect Atomic Ni Sites Via Biowaste Valorisation for High-Power Kinetics in Lithium-Sulfur Batteries

Yan Li,Yun Lu,Xueyu Jiang,Lijun Lu,Jinlei Qin,Dali Yang,Jeng-Lung Chen,Lina Zhang,Deli Wang,Aiwen Lei

DOI: https://doi.org/10.1016/j.ensm.2022.10.053

IF: 20.4

2022-01-01

Energy Storage Materials

Abstract:Lithium-sulfur (Li-S) batteries attracted much attention in the field of energy storage due to its outstanding theoretical energy density and eco-friendly materials. Nevertheless, the practical application of Li-S batteries is severely compromised by the rampant shuttle effect of soluble Li polysulfides (LiPSs) and sluggish kinetics of conversion under high sulfur loading (>5 mg cm-2). Herein, we designed the vacancy-defect atomic Ni active sites on hierarchical porous ultrathin nanocarbon (named as SACs-Ni-NC) derived from biowaste chitin to boost the kinetics of lithium-sulfur batteries under high sulfur loading (9.5 mg cm-2). As a result, the 1.5 mg cm-2 S loading on SACs-Ni-NC composite delivered initial specific capacity of 810 mA h g-1 at 5.0 C and maintained 78.5% after 1000 cycles. Remarkably, when the sulfur loading was elevated to 9.5 mg cm-2, an areal capacity of 6.96 mA h cm-2 was achieved at 2.0 C with the E/S ratio of 3.9 mu L mg-1 and stable for 200 cycles. The electrochemical tests and DFT calculations showed that the vacancy-defect atomic Ni sites not only afforded strong chemisorption for LiPSs but also synergistically promoted the redox kinetics process, demonstrating the superior prospect in developing practical Li-S batteries.
Nanosized CeO2C2 with Rich Oxygen Vacancies Embedded in Hollow Mesoporous Carbon As a Multifunctional Sulfur-Loaded Matrix for Lithium-Sulfur Batteries

Xiaoqin Hu,Chun Han,Yaqin Liang,Yang,Yue Zhang,Kemin Shen

DOI: https://doi.org/10.1016/j.jallcom.2024.177182

IF: 6.2

2025-01-01

Journal of Alloys and Compounds

Abstract:The innovative structural and compositional design of sulfur-loaded matrices is an effective strategy to improve the performance of lithium-sulfur batteries (LSBs). Herein, nanosized CeO2C2 with rich oxygen vacancies embedded in hollow mesoporous carbon composites (HMC/CeO2C2) were synthesized by hydrothermal and annealing reduction processes. This structure has several advantages: the large specific surface area and mesoporous carbon walls facilitate sulfur penetration and electron/ion transport; the abundant mesopores and hollow inner cavities provide the structural basis for sulfur storage and buffer its volume expansion; the oxygen vacancyrich CeO2C2 nanoparticles grown in situ in HMC and in close contact with carbon form an electrically favorable CeO2C2/C heterointerface as an efficient catalyst, which is conducive to catalyzing the redox reaction of sulfur. Consequently, the retention capacity of the HMC/CeO2C2/S electrode is 728 mAh g(-1) after 500 cycles at 0.5 C with a decay rate of 0.056 % per cycle, and it maintains a high reversible area capacity of 3.18 mAh cm(-2) and excellent cycling performance even under a high sulfur loading of 4.7 mg cm(-2). It provides an idea for the development of multifunctional sulfur-loaded materials with high sulfur loading, high conductivity, and high catalytic activity.
Highly Dispersed Catalytic Co3S4 among a Hierarchical Carbon Nanostructure for High-Rate and Long-Life Lithium-Sulfur Batteries.

Hui Zhang,Mingchu Zou,Wenqi Zhao,Yunsong Wang,Yijun Chen,Yizeng Wu,Linxiu Dai,Anyuan Cao

DOI: https://doi.org/10.1021/acsnano.8b07843

IF: 17.1

2019-01-01

ACS Nano

Abstract:Lithium-sulfur (Li-S) batteries are next-generation energy storage systems with high energy density, and the rate performance is a very important consideration for practical applications. Recent approaches such as introducing catalytic materials to facilitate polysulfide conversion have been explored, yet the results remain unsatisfactory. Here, we present an optimized Li-S electrode featured by a large amount of highly dispersed Co3S4 nanoparticles (∼10 nm in size) throughout a hierarchical carbon nanostructure hybridized from ZIF-67 and carbon nanotube (CNT) sponge. This enables homogeneous distribution and close contact between infiltrated sulfur and Co3S4 nanoparticles within the ZIF-67-derived N-doped carbon nanocubes, leading to effective chemical interaction with polysulfides, maximum catalytic effect and enhanced lithium ion diffusion, while the built-in three-dimensional CNT network ensures high electrical conductivity of the electrode. As a consequence, the Li-S battery exhibits both extraordinary rate performance by maintaining a capacity of ∼850 mAh g-1 at very high charge/discharge rate (5 C) and long-term cycling stability with 85% retention after 1000 cycles at 5 C (an average capacity fading rate of only 0.0137% per cycle).
Defect-engineered Sulfur Vacancy Modified NiCo2 S4-x Nanosheet Anchoring Polysulfide for Improved Lithium Sulfur Batteries

Xin Dai,Xu Wang,Guangjun Lv,Zhen Wu,Yan Liu,Junjie Sun,Yongning Liu,Yuanzhen Chen

DOI: https://doi.org/10.1002/smll.202302267

IF: 13.3

Small

Abstract:The low conductivity of sulfur and the shuttle effect of lithium polysulfides (LiPSs) are the two intrinsic obstacles that limit the application of lithium-sulfur batteries (LSBs). Herein, a sulfur vacancy introduced NiCo2 S4 nanosheet array grown on carbon nanofiber (CNF) membrane (NiCo2 S4-x /CNF) is proposed to serve as a self-supporting and binder-free interlayer in LSBs. The conductive CNF skeleton with a non-woven structure can effectively reduce the resistance of the cathode and accommodate volume expansion during charge-discharge process. The bonding between CNF matrix and NiCo2 S4 nanosheet is enhanced by in situ growth, ensuring fast electron transfer. Besides, the sulfur vacancies in NiCo2 S4 enhance the chemisorption of LiPSs, and the highly active sites at vacancies can accelerate the LiPSs conversion kinetics. LSB paired with NiCo2 S4-x /CNF interlayer achieved improved stability in 500 cycles at 0.2 C and long life of 3000 cycles at 3 C. More importantly, a high areal capacity of 9.69 mAh cm-2 is achieved with a sulfur loading of 10.8 mg cm-2 and a low electrolyte to sulfur (E/S) ratio of 4.8. This work provides insight into the sulfur vacancy in catalysis design for LiPSs conversion and demonstrates a promising direction for electronic defect engineering in material design for LSBs.
"Wane and wax" strategy: Enhanced evolution kinetics of liquid phase Li2S4 to Li2S via mutually embedded CNT sponge/Ni-porous carbon electrocatalysts

Xiaoxiao Liu,Qian Guo,Yu Li,Yue Ma,Xiaotao Ma,Panpan Liu,Donghong Duan,Zhonglin Zhang,Xianxian Zhou,Shibin Liu

DOI: https://doi.org/10.1016/j.jcis.2023.06.144

Abstract:The lithium-sulfur battery (Li-S) has been considered a promising energy storage system, however, in the practical application of Li-S batteries, considerable challenges remain. One challenge is the low kinetics involved in the conversion of Li2S4 to Li2S. Here, we reveal that highly dispersed Ni nanoparticles play a unique role in the reduction of Li2S4. Ni-porous carbon (Ni-PC) decorated in situ on a free-standing carbon nanotube sponge (CNTS/Ni-PC) enriches the current response of liquid phase Li2S4 and Li2S2 around the cathode more than 8.1 and 5.7 times higher than that of the CNTS blank sample, respectively, greatly boosting the kinetics and decreasing the reaction overpotential of Li2S4 reduction (lower Tafel slope and larger current response). Thus, with the same total overpotential, more space is provided for the concentration difference overpotential, allowing the more soluble polysulfide intermediates farther away from the surface of the conductive materials to be reduced based on the "wane and wax" strategy, and significantly improving the sulfur utilization. Consequently, S@CNTS/Ni-PC delivers excellent rate performance (812.4 mAh·g-1 at 2C) and a remarkable areal capacity of 10.1 mAh·cm-2. This work provides a viable strategy for designing a target catalyst to enhance the conversion kinetics in the Li2S4 reduction process.

Activator protein required for the enzymatic hydrolysis of cerebroside sulfate. Deficiency in urine of patients affected with cerebroside sulfatase activator deficiency and identity with activators for the enzymatic hydrolysis of GM1 ganglioside and globotriaosylceramide.

Oxygen Self-Doping Bi2S3@C Spheric Successfully Enhanced Long-Term Performance in Lithium-Ion Batteries

Without Dissolvent: Fast Inducing Cable‐Like Sb2S3@C from Natural Minerals with Enhanced Preferential Planes and Sulfur‐Defects Toward High‐Rate Properties

Metallic and Polar Co 9 S 8 Inlaid Carbon Hollow Nanopolyhedra As Efficient Polysulfide Mediator for Lithium−sulfur Batteries

Vanadium nitride nanocrystals decorated ultrathin, N-rich and hierarchically porous carbon nanosheets as superior polysulfides mediator for stable lithium-sulfur batteries

Cobalt-zinc carbides embedded in N-doped porous carbon nanospheres as polysulfide mediators for efficient lithium-sulfur batteries

Facile Synthesis of Porous Li2S@C Composites As Cathode Materials for Lithium–sulfur Batteries

Bi2S3–CoS@C core- shell structure derived from ZIF-67 as anodes for high performance lithium-ion batteries

One-pot Facile Fabrication of Carbon-Coated Bi2S3 Nanomeshes with Efficient Li-storage Capability

Quantitative defect regulation of heterostructures for sulfur catalysis toward fast and long lifespan lithium-sulfur batteries

Engineering checkerboard-like heterostructured sulfur electrocatalyst towards high-performance lithium sulfur batteries

Engineering the Conductive Network of Metal Oxide‐Based Sulfur Cathode toward Efficient and Longevous Lithium–Sulfur Batteries

Catalytic Boosting Bidirectional Polysulfide Redox using Co 0.85 Se/C Hollow Structure for High‐Performance Lithium‐Sulfur Batteries

Promoting polysulfide conversions via cobalt single-atom catalyst for fast and durable lithium-sulfur batteries

Active Sulfur-Host Material VS4 with Surface Defect Engineering: Intercalation-Conversion Hybrid Cathode Boosting Electrochemical Performance of Li-S Batteries

Synthesis of CoO Nanocrystals Decorated Porous Carbon Nanotube Microspheres As Sulfur Host for High Performance Li/S Batteries.

Engineering Vacancy-Defect Atomic Ni Sites Via Biowaste Valorisation for High-Power Kinetics in Lithium-Sulfur Batteries

Nanosized CeO2C2 with Rich Oxygen Vacancies Embedded in Hollow Mesoporous Carbon As a Multifunctional Sulfur-Loaded Matrix for Lithium-Sulfur Batteries

Highly Dispersed Catalytic Co3S4 among a Hierarchical Carbon Nanostructure for High-Rate and Long-Life Lithium-Sulfur Batteries.

Defect-engineered Sulfur Vacancy Modified NiCo2 S4-x Nanosheet Anchoring Polysulfide for Improved Lithium Sulfur Batteries

"Wane and wax" strategy: Enhanced evolution kinetics of liquid phase Li2S4 to Li2S via mutually embedded CNT sponge/Ni-porous carbon electrocatalysts