[Escape of the vitreous in the extraction of so-called senile cataract yesterday and today].

G. Offret,H. Offret

Abstract:

What problem does this paper attempt to address?

Simultaneous correction of bilateral temporomandibular joint ankylosis with mandibular micrognathia using internal distraction osteogenesis and 3-dimensional craniomaxillofacial models.

Ping Feiyun,Liu Wei,Chen Jun,Xu Xin,Shi Zhuojin,Yan Fengguo

DOI: https://doi.org/10.1016/j.joms.2009.07.022

IF: 1.9

2010-01-01

Journal of Oral and Maxillofacial Surgery

Abstract:The present study evaluated the simultaneous correction of bilateral temporomandibular joint ankylosis with mandibular micrognathia using internal distraction osteogenesis (DO) with the help of a 3-dimensional craniomaxillofacial model technique.A total of 16 patients (age 18 to 43 years) with bilateral temporomandibular joint ankylosis and mandibular micrognathia were included in the present study. Obstructive sleep apnea and hypopnea syndrome was diagnosed in all patients preoperatively. Three-dimensional craniomaxillofacial models of the 16 patients were constructed using computed tomography and a rapid prototype technique. Simulation surgery and individual internal DO was performed on the models. The treatment included simultaneous DO of the mandibular body and transport DO for temporomandibular joint arthroplasty. The distraction was started on the seventh day after surgery. The distraction rate was 0.8 mm/day. The patients began active mouth opening postoperatively. Distracters were kept in place for 4 months after distraction completion and then removed. Polysomnography, cephalometry, and computed tomography were performed at 6 months postoperatively.The obstructive sleep apnea and hypopnea syndrome was cured, and the micrognathia was corrected in all patients. The average mouth opening increased from 4.6 mm preoperatively to 33.5 mm postoperatively. The average range of the sella-nasion-supramental angle increased from 68.7 degrees preoperatively to 77.6 degrees postoperatively. Bone formation in the distraction gaps was observed. The follow-up period was 29.7 months (range 6 to 52). No complications or recurrence of temporomandibular joint ankylosis or micrognathia occurred in any patient during the follow-up period.Bilateral temporomandibular joint ankylosis accompanied by mandibular micrognathia and obstructive sleep apnea and hypopnea syndrome can be corrected effectively by simultaneous internal DO. The application of preoperative simulation surgery using 3-dimensional craniomaxillofacial model has many advantages for planning the surgical method and precise operation. Our preliminary results have shown that it is a safe, effective, and feasible technique.
A proposed novel digital condylar position adjustment technique to help restore a normal disc-condyle relationship

Yanji Gong,Fang Liu,Yunfan Zhu,Qinlanhui Zhang,Jinyi Zhu,Yang Liu,Deqiang Yin

DOI: https://doi.org/10.1016/j.heliyon.2024.e32037

IF: 3.776

2024-05-31

Heliyon

Abstract:Objectives: To demonstrate a novel digital technique that enables real-time visualisation of occlusal transfer and adjustment of condyle position, to (1) improve the repeatability of occlusal transfer and the accuracy of condyle position adjustment and (2) be clinically effective in helping to restore the disc-condyle relationship. Materials and methods: Three participants were included in the study and underwent facebow transfers using two different methods. The digital method used patient-related three-dimensional imaging data matched with digital dental casts for occlusal transfer. The conventional method used anatomical facebows. The condylar position was adjusted based on occlusal transfer results. The results were evaluated and compared in three dimensions. In addition, clinical application data from 36 patients were analysed before and after condylar position adjustment. Statistical significance was set at p < 0.05. Results: Differences in the spatial positions of the three anatomical structures reproduced by both methods were statistically significant (p = 0.000). After adjusting the rotation of the condylar position, the positional deviation of the condylar point along the X- and Z-axes was significantly lower in the digital group (p < 0.05). After adjustment for translation (X and Z), the positional deviation showed no difference along the X- and Z-axes (p > 0.05) but a significant difference along the Y-axis (p < 0.001). Conclusion: A novel digital technique for occlusal transfer and condylar position adjustment was presented. This technique simplifies clinical practice, improves the accuracy of results, and can help restore a normal disc-condyle relationship.
Clinical effect of digitalized designed and 3D-printed repositioning splints in the treatment of anterior displacement of temporomandibular joint disc

Xiao Jin,Wang Chi

DOI: https://doi.org/10.1186/s12891-024-07477-z

2024-05-03

Abstract:Objective: To compare the treatment effectiveness of digitized and 3D-printed repositioning splints with that of conventional repositioning splints in the treatment of anterior displacement of the temporomandibular joint disc. Methods: This retrospective study included 96 patients with disc displacement of the anterior temporomandibular joint. They were treated with either digitally designed and 3D-printed repositioning splints or traditional splints and followed up for at least six months. Changes in signs and symptoms such as pain and mouth opening before and after treatment were recorded to evaluate treatment outcomes. Results: During the first month of treatment, both the digitally designed and 3D-printed repositioning splint groups (Group B) and the traditional repositioning splint group (Group A) showed significant increases in mouth opening, with increases of 4.93 ± 3.06 mm and 4.07 ± 4.69 mm, respectively, and there was no significant difference between the two groups. Both groups had a significant reduction in visual analog scale (VAS) pain scores, with Group B showing a greater reduction of 1.946 ± 1.113 compared to 1.488 ± 0.978 in Group A (P < 0.05). By the sixth month, Group B's mouth opening further improved to 38.65 ± 3.22 mm (P < 0.05), while Group A's mouth opening did not significantly improve. Regarding pain, Group A's VAS score decreased by 0.463 ± 0.778 after one month, and Group B's score decreased by 0.455 ± 0.715; both groups showed significant reductions, but there was no significant difference between the two groups. Conclusion: Compared with traditional repositioning splints, digitally designed and 3D-printed repositioning splints are more effective at reducing patient pain and improving mouth opening. 3D-printed repositioning splints are an effective treatment method for temporomandibular joint disc displacement and have significant potential for widespread clinical application.
The preliminary study of the effects of individual musculoskeletally stable position in the treatment of temporomandibular disorders

Zhi Zhang,Xiao Luo,Xiaoqing Li,Bing Shi,Lijun Tan

DOI: https://doi.org/10.1186/s12903-024-04864-9

2024-09-13

BMC Oral Health

Abstract:Background: Temporomandibular Disorders (TMD) is the dysfunction of group of muscles and bones in the joint area, the main symptoms of TMD are the pain of the chewing muscles and (or) the temporomandibular joints, mandibular movement disorders and joint noise. This study was designed to explore the therapeutic effects following Individual Musculoskeletally Stable (IMS) position stabilization splint therapy for TMD patients using Fricton index, cone beam computed tomography (CBCT) and surface-Electromyogram (sEMG). Methods: In this study, we enrolled 31 TMD patients (ranging from 18 to 26 years old, including 7 males and 24 females), first Fricton index was used to evaluate the clinical curative effect of TMD with the treatment of IMS stabilization splint; then CBCT was used to observe the TMJ condylar position changes of TMD before and after the treatment of IMS stabilization splint; finally sEMG was used to observe the changes of electromyography of anterior temporalis (AT) and masseter muscles (MM) of TMD before and after the treatment of IMS stabilization splint. Results: The course of treatment was 6-8 months, with an average of 7.6 months. After the IMS stabilization splint treatment, TMD symptoms relieved, especially in pain, mandibular movement disorder, but still slightly inferior in the treatment of joint noise. And there was a statistically significant difference in the anterior and inner joint space, the condyle had the tendency of moving forward and outward. AT presented reduction significantly of EMG value at rest position after treatment. Conclusions: IMS stabilization splint is a therapeutic reversible treatment for TMD, especially for pain and mandibular movement disorder; it produces effects of forward and outward condylar movement and elimination of the masticatory muscles antagonism.
Efficacy of Digital Occlusal Splint Technology in the Treatment of Irreducible Anterior Displacement of Temporomandibular Joint Disc

Baobing Yang

DOI: https://doi.org/10.1166/jbt.2023.3337

2023-09-01

Journal of Biomaterials and Tissue Engineering

Abstract:This study investigates the efficacy of digital occlusal splint technology in treating irreducible anterior displacement of the temporomandibular joint (TMJ) disc and assesses its impact on clinical symptoms and TMJ function. A total of 36 patients treated for irreducible anterior displacement of the TMJ disc at our hospital from January to December 2022 were enrolled and randomized either into the digital occlusal splint group (digital group) or the traditional occlusal splint group (traditional group), with 18 patients in each group. The treatment duration for all patients was 12 weeks. Clinical adjustment time for occlusion was compared between the two groups. The Visual Analog Scale (VAS) recorded and evaluated pain intensity and patient comfort at initial wear, 1 week, and 4 weeks after splint usage. Maximum active mouth opening was measured before treatment and at 1, 4, 8, and 12 weeks post-treatment. The Fricton TMJ Dysfunction Index evaluated clinical efficacy based on parameters such as mandibular movement, joint noise, joint palpation, muscle palpation, dysfunction index, muscle tenderness index, and joint dysfunction index. Patient satisfaction with treatment was compared between the two groups. The clinical adjustment time for the digital occlusal splint was significantly shorter than that for the traditional occlusal splint ( P < 0.05). At 4 weeks, the digital group exhibited significantly lower pain scores than the traditional group ( P < 0.05). At 1 and 4 weeks, the digital group demonstrated significantly better comfort scores than the traditional group ( P < 0.05). There was no significant difference in maximum active mouth opening between the two groups before treatment and at 1 week after treatment ( P > 0.05). However, at 4, 8, and 12 weeks, the digital group displayed significantly greater maximum active mouth opening than the traditional group ( P < 0.05). The Fricton indices for the digital group were significantly lower than those for the traditional group after treatment ( P < 0.05). The patient satisfaction survey revealed a 100% satisfaction rate for the digital group and 88.9% for the traditional group ( P < 0.05). The application of digital occlusal splint technology in treating irreducible anterior displacement of the TMJ disc demonstrates excellent efficacy. It effectively shortens clinical adjustment time for the splint and significantly improves clinical symptoms and TMJ function in patients. This technology is worth promoting in clinical practice.

cell & tissue engineering
Three-dimensional cone beam computed tomography analysis of temporomandibular joint response to the Twin-block functional appliance

Yuan-yuan Jiang,Lian Sun,Hua Wang,Chun-yang Zhao,Wei-Bing Zhang

DOI: https://doi.org/10.4041/kjod.2020.50.2.86

2020-01-01

The Korean Journal of Orthodontics

Abstract:OBJECTIVE: To propose a three-dimensional (3D) method for evaluating temporomandibular joint (TMJ) changes during Twin-block treatment.METHODS: Seventeen patients with Class II division 1 malocclusion treated using Twin-block and nine untreated patients with a similar malocclusion were included in this research. We collected their cone beam computed tomography (CBCT) data from before and 8 months after treatment. Segmentations were constructed using ITK-SNAP. Condylar volume and superficial area were measured using 3D Slicer. The 3D landmarks were identified on CBCT images by using Dolphin software to assess the condylar positional relationship. 3D models of the mandible and glenoid fossa of the patients were constructed and registered via voxel-based superimposition using 3D Slicer. Thereafter, skeletal changes could be visualized using 3DMeshMetric in any direction of the superimposition on a color-coded map. All the superimpositions were measured using the same scale on the distance color-coded map, in which red color represents overgrowth and blue color represents resorption.RESULTS: Significant differences were observed in condylar volume, superficial area, and condylar position in both groups after 8 months. Compared with the control group (CG), the Twin-block group exhibited more obvious condyle-fossa modifications and joint positional changes. Moreover, on the color-coded map, more obvious condyle-fossa modifications could be observed in the posterior and superior directions in the Twin-block group than in the CG.CONCLUSIONS: We successfully established a 3D method for measuring and evaluating TMJ changes caused by Twin-block treatment. The treatment produced a larger condylar size and caused condylar positional changes.
Three-dimensional Quantitative Evaluation of Condylar Bone Remodeling of Temporomandibular Joint Based on Cone-Beam CT Imaging

Y Li,M Q Liu,B Liu,J Lei,K Y Fu

DOI: https://doi.org/10.3760/cma.j.cn112144-20200507-00249

2020-01-01

Abstract:Objective: To establish a three-dimensional （3D） quantitative measurement and evaluate the condylar bone remodeling of temporomandibular joint (TMJ). Methods: Pre-and post-treatment cone-beam CT (CBCT) data were obtained from 41 patients ［10 males, 31 females, mean age of (19.7±4.4) years (12-30 years old)］, who visited the Center for TMD and Orofacial Pain, Peking University School and Hospital of Stomatology from November 2014 to August 2019, and diagnosed with acute disc displacement without reduction or disc displacement with reduction, with intermittent locking and treated by manual disc reduction followed by anterior repositioning splint. First, condylar bone remodeling was evaluated according to the number of "double contour image" and qualitatively classified as no remodeling (no double contour image), partial remodeling (1-4 double contour images) and remarkable remodeling (5-6 double contour images). Then, condylar bone remodeling was quantitatively evaluated by CBCT based 3D measurement: segmenting condylar images using a semi-automatic method of the manually preliminary mark combined with watershed algorithm, reconstructing the surface models, superimposing the pre-and post-treatment condylar images and finally calculating the volumetric differences of condyle and condylar head, respectively. Results: The Kappa values of two-dimensional (2D) qualitative evaluation were 0.66-0.87, and 3D quantitative measurements of condyle and condylar head volume were also reliable, with the intraclass correlation coefficient (ICC) values of intra-observer 0.998/0.941 and inter-observer 0.999/0.942 respectively. The volumetric increment of the condyle and condylar head after treatment was (41.7±90.2) mm³ and (62.8±70.9) mm³, respectively. Eighty-two condyles were divided into three sub-groups: no remodeling (21), partial remodeling (20) and remarkable remodeling (41). Ranking of the volumetric increment of the condyle and condylar head after treatment was as follows: remarkable remodeling group>partial remodeling group>no remodeling group (P<0.05). Conclusions: The 3D quantitative measurement for evaluating condylar bone remodeling had excellent consistency and reliability, which was consistent with the qualitative classification for condylar bone remodeling. The condylar head as a region of interest was more sensitive to the volumetric changes.
Quantitative analysis of the mouth opening movement of temporomandibular joint disorder patients according to disc position using computer vision: a pilot study

Kug Jin Jeon,Young Hyun Kim,Eun-Gyu Ha,Han Seung Choi,Hyung-Joon Ahn,Jeong Ryong Lee,Dosik Hwang,Sang-Sun Han

DOI: https://doi.org/10.21037/qims-21-629

Abstract:Background: Temporomandibular joint disorder (TMD), which is a broad category encompassing disc displacement, is a common condition with an increasing prevalence. This study aimed to develop an automated movement tracing algorithm for mouth opening and closing videos, and to quantitatively analyze the relationship between the results obtained using this developed system and disc position on magnetic resonance imaging (MRI). Methods: Mouth opening and closing videos were obtained with a digital camera from 91 subjects, who underwent MRI. Before video acquisition, an 8.0-mm-diameter circular sticker was attached to the center of the subject's upper and lower lips. The automated mouth opening tracing system based on computer vision was developed in two parts: (I) automated landmark detection of the upper and lower lips in acquired videos, and (II) graphical presentation of the tracing results for detected landmarks and an automatically calculated graph height (mouth opening length) and width (sideways values). The graph paths were divided into three types: straight, sideways-skewed, and limited-straight line graphs. All traced results were evaluated according to disc position groups determined using MRI. Graph height and width were compared between groups using analysis of variance (SPSS version 25.0; IBM Corp., Armonk, NY, USA). Results: Subjects with a normal disc position predominantly (85.72%) showed straight line graphs. The other two types (sideways-skewed or limited-straight line graphs) were found in 85.0% and 89.47% in the anterior disc displacement with reduction group and in the anterior disc displacement without reduction group, respectively, reflecting a statistically significant correlation (χ2=38.113, P<0.001). A statistically significant difference in graph height was found between the normal group and the anterior disc displacement without reduction group, 44.90±9.61 and 35.78±10.24 mm, respectively (P<0.05). Conclusions: The developed mouth opening tracing system was reliable. It presented objective and quantitative information about different trajectories from those associated with a normal disc position in mouth opening and closing movements. This system will be helpful to clinicians when it is difficult to obtain information through MRI.
Application of Computer-Aided Virtual Mandibular Position in the Simultaneous Treatment of Children with Temporomandibular Joint Ankylosis and Jaw Deformity

S Chen,Y He,J G An,Y Zhang

DOI: https://doi.org/10.19723/j.issn.1671-167x.2019.05.027

2019-01-01

Abstract:OBJECTIVE:To evaluate the feasibility of computer-aided design virtual mandibular position in the simultaneous treatment of children with temporomandibular joint ankylosis (TMJA) and jaw deformity.METHODS:The children with unilateral TMJA were surgically treated from January 2016 to June 2017 in the Department of Oral and Maxillofacial Surgery. The image data of jaw and dentition were imported into the computer software to simulate the surgical procedure. An osteotomy of the affected side was performed to remove ankylosed bone mass. Then the mandible was rotated around the unaffected condyle to eliminate the chin deviation by the virtual plan. An open bite was thus created on the affected side to provide space for vertical midfacial growth. In the virtual mandibular position, the affected ramus was reconstructed with costochondral grafting. Finally, digital occlusal splint was designed and prefabricated by 3D printing. During surgery, temporomandibular joint ankylosis was released and mandibular position was guided in place by the digital occlusal splint. In the new mandibular position, costochondral grafting was completed. After the surgery, the occlusal splint was wired to the mandibular dentition and would be gradually adjusted by grinding off the maxillary side to promote downward growth of the maxilla until the open bite was eliminated. The ramus height and chin deviation were measured before and one week after the surgery to validate the method. Comparisons of the measurements were made by means of a repeatedmeasures analysis of variance (ANOVA) (P=0.05). Pairwise multiple comparisons were conducted using the Bonferroni correction (P=0.05).RESULTS:Five patients were included in this study. Under the guidance of the digital occlusal splint, the mandible could reach the preoperative designed position smoothly in all the cases. The chin deviations were (0.58±0.20) mm in the virtual plan before surgery, and (0.70±0.27) mm after surgery, which were not significant statistically (P>0.05). The ramus heights on the affected side were (48.19±3.20) mm in the virtual plan before surgery, and (48.17±3.62) mm after surgery, which were not significant statistically (P>0.05).CONCLUSION:It is feasible and reliable in the simultaneous treatment of TMJA with jaw deformity under the guidance of virtual mandibular position.
[Method and Accuracy of Determining the Jaw Position of Repositioning Splint with the Aid of Digital Technique].

S B Fang,G J Yang,Y F Kang,Y C Sun,Q F Xie

DOI: https://doi.org/10.19723/j.issn.1671-167x.2021.01.012

2021-01-01

Abstract:OBJECTIVE:To establish the workflow of determining the jaw position of repositioning splint with the aid of digital technique, and to evaluate the accuracy of this workflow and compare the accuracy of raising different vertical dimensions in vitro.METHODS:A volunteer was recruited. The data of full-arch scans, cone beam computed tomography (CBCT) image and ultrasonic jaw motion tracking of the volunteer were acquired. The full-arch scans were merged with the CBCT image, which were then matched to the jaw motion tracking reference system. The jaw position of repositioning splint was determined when the anterior teeth opening was 3 mm and the condyle was in centric relation of the fossa in the sagittal plane. A digital repositioning splint was designed in the software based on virtual articulator and fabricated with additive manufacturing technique. After the splint was tried in, another CBCT image was taken and a qualitative analysis was conducted to compare the position of condyle between these two CBCT images. In the in vitro study, standard dental plaster casts with resin ball markers attached to the base were mounted onto a fully adjustable articulator in the intercuspal position. The dental casts were scanned by an extraoral scanner to establish digital models. The ultrasonic jaw motion tracking device was used to obtain simulated jaw movements on the articulator, which was repeated for three times. The digital models and data of jaw movements were merged in one coordination with the aid of bite forks. The jaw position of repositioning splint was determined by adjusting data of jaw movements, each of which was used to determine three vertical jaw positions 4 mm, 5 mm, and 6 mm with the horizontal jaw position of protrusion 2 mm. The virtual articulators with differently adjusted jaw movements were applied in designing repositioning splints, and the final repositioning splints and virtual jaw relationships were exported in STL format. Then the repositioning splints were fabricated with additive manufacturing technique and tried in plaster casts on the mechanical articulator, which were scanned and the jaw relationships on the mechanical articulator were exported later. The virtual jaw relationships and scanned jaw relationships were registered according to lower models and displacement of upper models was calculated. Ball markers were fit to acquire the coordinates of centers and absolute difference values of centers along three coordinating axes X, Y, and Z were calculated. One-way analysis of variance was conducted using SPSS 18.0 software to compare deviations of the three different vertical jaw relationships in two-side test and the significance level was 0.05.RESULTS:With the aid of multi-source data fusion and individualized jaw motion, the clinical workflow of determining jaw position of repositioning splint was preliminarily established. The designed jaw position was realized on the right and the condyle was more inferior than the designed position on the left. Both displacement of the upper models and absolute difference values of centers showed no significant differences (P>0.05) in different vertical jaw dimensions. The displacement of the upper models was (0.25±0.04) mm. The absolute difference values of centers along the three coordinating axes X, Y, and Z were respectively (0.08±0.01) mm, (0.30±0.02) mm, and (0.21±0.04) mm.CONCLUSION:A novel method of determining the jaw position of repositioning splint with the aid of digital technique is established. It is proved to be feasible by try-in after multi-data fusion, computer-aided design and computer-aided manufacturing. As is shown in vitro, it is accurate to apply this method in adjusting jaw position. Further clinical trial will be designed to evaluate its clinical effect.
Biomechanical behavior of temporomandibular joint movements driven by mastication muscles

Kang-Jie Cheng,Qing-Qing Zhang,Feng Zhang,Russell Wang,Yun-Feng Liu

DOI: https://doi.org/10.1002/cnm.3862

2024-08-14

Abstract:Surgery of jawbones has a high potential risk of causing complications associated with temporomandibular joint disorder (TMD). The objective of this study was to investigate the effects of two drive modeling methods on the biomechanical behavior of the temporomandibular joint (TMJ) including articular disc during mandibular movements. A finite element (FE) model from a healthy human computed tomography was used to evaluate TMJ dynamic using two methods, namely, a conventional spatial-oriented method (displacement-driven) and a compliant muscle-initiated method (masticatory muscle-driven). The same virtual FE model was 3D printed and a custom designed experimental platform was established to validate the accuracy of experimental and theoretical results of the TMJ biomechanics during mandibular movements. The results show that stress distributed to TMJ and articular disc from mandibular movements provided better representation from the muscle-driving approach than those of the displacement-driven modeling. The simulation and experimental data exhibited significant strong correlations during opening, protrusion, and laterotrusion (with canonical correlation coefficients of 0.994, 0.993, and 0.932, respectively). The use of muscle-driven modeling holds promise for more accurate forecasting of stress analysis of TMJ and articular disc during mandibular movements. The compliant approach to analyze TMJ dynamics would potentially contribute to clinic diagnosis and prediction of TMD resulting from occlusal disease and jawbone surgery such as orthognathic surgery or tumor resection.
Effectiveness of Occlusal Splint Therapy in Moderating Temporomandibular Joint Disorders With Joint Displacement: A Retrospective Analysis Using Cone Beam Computed Tomography.

Vivek Cr,Tony Antony,Rakhi Bharat,Alexander Ka,Abin Mathew,Dwijesh S. Goswami

DOI: https://doi.org/10.7759/cureus.57300

2024-03-01

Cureus

Abstract:Background Temporomandibular joint disorders (TMD) represent a prevalent group of conditions impacting the temporomandibular joint. Among the therapeutic interventions, occlusal splint therapy has gained recognition for its potential to address TMD symptoms, particularly in cases involving joint displacement. Objective This study aims to investigate the effectiveness of occlusal splint therapy in cases of moderate TMD with joint displacement, focusing on changes in condylar position, joint morphology, and patient-reported outcomes. Methods A retrospective analysis was conducted involving 148 participants who underwent occlusal splint therapy between January 2018 and December 2020. Data were collected through cone beam computed tomography (CBCT) imaging for precise assessments of condylar position and joint morphology. Ethical approval was obtained, and participants provided informed consent. Baseline characteristics, medical history, and TMD severity were recorded. Occlusal splint therapy included individualized fabrication, occlusal analysis, adjustments for optimal fit, and prescribed wear schedules. Follow-up included CBCT scans at specified intervals (three months and six months), with participant-reported outcomes collected. The data analysis was conducted using IBM SPSS Statistics for Windows, Version 22.0 (Released 2013; IBM Corp., Armonk, NY, USA). Paired t-tests or nonparametric equivalents were employed to assess changes in condylar position and joint morphology. Subgroup analyses were conducted to explore potential factors influencing treatment outcomes. The significance level was set at p < 0.05 for all statistical tests. Results The entire cohort (n = 148) had a mean age of 32.5 years (± 8.1), with a balanced gender distribution. Changes in condylar position revealed a statistically significant improvement (p = 0.03), with a mean decrease of 0.2 mm posttreatment. Joint morphology changes indicated increased joint space width (p = 0.01), improved disc position (p = 0.02), and nonsignificant alterations in bony structures (p = 0.10). Patient-reported outcomes demonstrated significant improvements in pain levels, jaw functionality, and satisfaction (all p < 0.001). Age and gender subgroup analyses showed consistent improvements in condylar position, joint morphology, and patient-reported outcomes across different groups. Conclusion Occlusal splint therapy demonstrated effectiveness in improving condylar position, joint morphology, and patient-reported outcomes in cases of moderate TMD with joint displacement. The findings underscore the potential of occlusal splint therapy as a viable intervention for managing TMD, providing valuable insights for clinicians and researchers.

Medicine
Diagnostic Efficacy of CBCT, MRI and CBCT–MRI Fused Images in Determining Anterior Disc Displacement and Bone Changes of Temporomandibular Joint

Ying-Hui Wang,Ruo-Han Ma,Jia-Jun Li,Chuang-Chuang Mu,Yan-Ping Zhao,Juan-Hong Meng,Gang Li

DOI: https://doi.org/10.1259/dmfr.20210286

2022-01-01

Dentomaxillofacial Radiology

Abstract:Objectives: To evaluate the diagnostic efficacy of CBCT-MRI fused image for anterior disc displacement and bone changes of temporomandibular joint (TMJ), which are the main imaging manifestations of temporomandibular disorders (TMD). Methods: Two hundred and thirty-one TMJs of 120 patients who were diagnosed with TMD were selected for the study. The anterior disc displacement, bone defect and bone hyperplasia evaluated by three experts were used as a reference standard. Three residents individually evaluated all the three sets of images, which were CBCT images, MRI images and CBCT-MRI fused images from individual CBCT and MRI images in a random order for the above-mentioned three imaging manifestations with a five-point scale. Each set of images was observed at least 1 week apart. A second evaluation was performed 4 weeks later. Intra- and inter observer agreements were assessed using the intraclass correlation coefficient (ICC). The areas under the ROC curves (AUCs) of the three image sets were compared with a Z test, and p < 0.05 was considered statistically significant. Results: One hundred and forty-five cases were determined as anterior disc displacement, 84 cases as bone defect and 40 cases as bone hyperplasia. The intra- and inter observer agreements in the CBCT-MRI fused image set (0.76-0.91) were good to excellent, and the diagnostic accuracy for bone changes was significantly higher than that of MRI image set (p < 0.05). Conclusions CBCT-MRI fused images can display the disc and surrounding bone structures simultaneously and significantly improve the observers' reliability and diagnostic accuracy, especially for inexperienced residents.
Physical activity for a healthy life.

M. Karvonen

DOI: https://doi.org/10.1080/02701367.1996.10607946

1996-06-01

Research Quarterly for Exercise and Sport

Abstract:The evidence surveyed by Blair and Connelly (1996) now provides a clearly outlined challenge for action in applying physical activity for health promotion. Strategies to choose are single risk or broad spectrum within an individual or community approach. The 20-year results of the broad spectrum, community intervention in North Karelia, Finland more than halved the coronary mortality of participants aged 35-64 years (Puska, Tuomilehto, Vartiainen, Korhonen, & Torppa, 1995). Many facets of human lives, including physical activity, were charted in another project: the 11-year follow-up of Finnish municipal employees aged 45-58 years at entry into the project (Tuomi, 1991). In this project, physical activity showed marked positive associations with work capacity, lifestyle, and well-being. Thus, in addition to reducing morbidity and mortality, physical activity and fitness also promote mental and social health and improve the quality of life.
Impact of Small Incision Reduction and Suture Linked with Functional Appliance of Sufferers with Irrecoverable TMJ Anterior Disc Displacement

Xiaotong Wei,Wei Yan,Anjun Sun,Hao Wang,Wei Wang

DOI: https://doi.org/10.1155/2022/7196599

2022-09-26

Abstract:Methods: 90 patients with irreducible ADD of TMJ treated from August 2020 to August 2021 were acquired in our hospital. They were randomly divided into control group and trial group randomly. There were 45 patients in each group. The sufferers in the control group were treated with oral drug therapy and small incision reduction and suture, while those in the trial group were treated with small incision reduction and suture linked with functional appliance. The pain score, dysfunction, joint function recovery, facial improvement, and clinical impacts of the two groups were contrasted. Results: Compared with that in the control group at 1 week, 4 weeks, and 6 months after therapy, the pain score in the trial group was markedly higher. After therapy, in the two groups, maximum vertical opening (MVO), left lateral excursion (LLE), and right lateral excursion (RLE) levels were markedly higher than those in the control group. The MRI score of the trial group was markedly higher than that of the control group at 1 week, 4 weeks, and 6 months after therapy, and the total effective rate of the trial group was markedly higher than that of the control group. Conclusion: The use of small incision reduction and suture linked with functional appliance in the therapy of sufferers with irreducible ADD of TMJ is beneficial to relieve pain, promote the recovery of body function, and contribute to the recovery of joint function.
Effect of occlusal contact on TMJ loading during occlusion: An in silico study

Yunfan Zhu,Fangjie Zheng,Yanji Gong,Jinyi Zhu,Deqiang Yin,Yang Liu

DOI: https://doi.org/10.1016/j.compbiomed.2024.108725

Abstract:Alterations in occlusal features may have significant consequences, ranging from dental aesthetics to health issues. Temporomandibular joint disorders (TMDs) are often associated with joint overload, and the correlation between occlusal features and TMDs has been thoroughly discussed. In current work, we introduced a novel stomatognathic model that aligns well with in vivo experimental measurements, specifically designed to decouple the impact of occlusal contact and periodontal ligament (PDL) negative feedback on temporomandibular joint (TMJ) loading. Utilizing an in-silico approach, the simulation analysis included six symmetric occlusal contact scenarios. Furthermore, a biomechanical lever model was employed to clarify the mechanical mechanism and investigate the multi-factorial effects of TMJ overload. These findings indicate that anterior shifts in the occlusal centre lead to increased TMJ loading, particularly in occlusal contact cases with anteroposterior changes. Considering the symmetrical distribution of occlusal contact, mediolateral alterations had a more modest effect on TMJ loading. Additionally, potential negative feedback activated by principal strain of periodontal could not only alleviate joint load but also diminish occlusal force. These investigations enhance our understanding of the intricate interactions between masticatory muscles, occlusal forces, and joint contact forces, thereby providing motivation for future comprehensive studies on TMJ biomechanical overload.
Conjugation fidelity of double phase-conjugate mirrors in photorefractive materials with two-center transport.

I. Geri,C. Ozkul

DOI: https://doi.org/10.1364/OL.21.001741

IF: 3.6

1996-11-01

Optics Letters

Abstract:The temporal evolution of double phase-conjugate mirrors (DPCM's) in photorefractive materials such as BaTiO(3):Co:Fe is studied by use of the plane-wave expansion method. The buildup time of DPCM and its conjugation fidelity are compared with those of photorefractive materials with a single-center transport. Numerical simulations show that one can decrease the threshold value of the coupling strength required for the DPCM operation with a high conjugation fidelity by doping the BaTiO(3) crystals weakly with Co in comparison with undoped crystals.
Health reform and Healthy People initiative.

J. Fielding,S. Teutsch,H. Koh

DOI: https://doi.org/10.2105/AJPH.2011.300312

American Journal of Public Health

Abstract:The passage of the Affordable Care Act builds on and strengthens the foundation for prevention and wellness that Healthy People--the nation's health promotion and disease prevention aspirations for a healthier nation--established. The Affordable Care Act reaffirms the themes of Healthy People by promoting population-based prevention and sets the stage for Healthy People 2020. The heart of Healthy People 2010 lies in its leading health indicators, reflecting high-priority health issues for the nation. National progress requires broad application of the ecological health model. We reviewed the status of each Healthy People 2010 indicator and noted how the Affordable Care Act drives future positive health outcomes using the ecological model of health as a prism for viewing health improvement.
The fragile mind: early life stress and inflammatory disease.

D. Jessop

DOI: https://doi.org/10.1210/en.2008-0320

IF: 5.051

2008-06-01

Endocrinology

Abstract:
[The orthodontic therapeutic principles for malocclusions concurring with temporomandibular joint disorders]

Gang Shen

Abstract:The biological nature of temporomandibular joint (TMJ) featuring adaptive remodeling allows for TMJ structural changes in response to external stimuli, including alterations in occlusion and in mandibular posture. Correlative susceptibility exists between malocclusions and TMJ disorders (TMD), evidenced by high incidence of TMD coinciding with skeletal originated malocclusion with facial prognathsim (Angle Class I skeletal II high angle). Clinical manifestations include markedly retruded mandible together with increased overjet, or mandibular transverse deviation, due to condylar pathological resorption. It is critically imperative to execute differential diagnosis between the routine malocclusions and those infringed with TMD. The prime stipulations governing the orthodontic procedures include the patient's notification of the existential TMD conditions prior to any orthodontic interventions, close inspections of TMD developments during the treatment, and a specially designed retention protocol aftermath. For the cases where severe overjet and mandibular displacement occur as a result of TMD, some specific orthopedic modalities can be implemented to improve the occlusion by restoring the shifted mandible. TMD conditions are also expected to be relieved with mandibular repositioning, which encourages new bone formation in the degraded condyles. The newly developed clear version of orthopedic appliances, namely, S8-SGTB, S8-SGHB, S9 and S10 are of promising efficacy in treating this category of patients.

[Escape of the vitreous in the extraction of so-called senile cataract yesterday and today].

Simultaneous correction of bilateral temporomandibular joint ankylosis with mandibular micrognathia using internal distraction osteogenesis and 3-dimensional craniomaxillofacial models.

A proposed novel digital condylar position adjustment technique to help restore a normal disc-condyle relationship

Clinical effect of digitalized designed and 3D-printed repositioning splints in the treatment of anterior displacement of temporomandibular joint disc

The preliminary study of the effects of individual musculoskeletally stable position in the treatment of temporomandibular disorders

Efficacy of Digital Occlusal Splint Technology in the Treatment of Irreducible Anterior Displacement of Temporomandibular Joint Disc

Three-dimensional cone beam computed tomography analysis of temporomandibular joint response to the Twin-block functional appliance

Three-dimensional Quantitative Evaluation of Condylar Bone Remodeling of Temporomandibular Joint Based on Cone-Beam CT Imaging

Quantitative analysis of the mouth opening movement of temporomandibular joint disorder patients according to disc position using computer vision: a pilot study

Application of Computer-Aided Virtual Mandibular Position in the Simultaneous Treatment of Children with Temporomandibular Joint Ankylosis and Jaw Deformity

[Method and Accuracy of Determining the Jaw Position of Repositioning Splint with the Aid of Digital Technique].

Biomechanical behavior of temporomandibular joint movements driven by mastication muscles

Effectiveness of Occlusal Splint Therapy in Moderating Temporomandibular Joint Disorders With Joint Displacement: A Retrospective Analysis Using Cone Beam Computed Tomography.

Diagnostic Efficacy of CBCT, MRI and CBCT–MRI Fused Images in Determining Anterior Disc Displacement and Bone Changes of Temporomandibular Joint

Physical activity for a healthy life.

Impact of Small Incision Reduction and Suture Linked with Functional Appliance of Sufferers with Irrecoverable TMJ Anterior Disc Displacement

Effect of occlusal contact on TMJ loading during occlusion: An in silico study

Conjugation fidelity of double phase-conjugate mirrors in photorefractive materials with two-center transport.

Health reform and Healthy People initiative.

The fragile mind: early life stress and inflammatory disease.

[The orthodontic therapeutic principles for malocclusions concurring with temporomandibular joint disorders]