Abstract:This article applies and critically compares essentially all methods (based on Arrhenius temperature dependence and power law reduced mass) to deduce the degradation parameters of polyether ether ketone (PEEK) and its carbon fibre composites, PEEK+CF, from thermogravimetric analysis experiments in nitrogen. The methods used include classical (and variations) analytical approximate methods, a method applying the genetic algorithm for optimization and the Distributed Activation Energy Model, usually not discussed with the other methods. The analytical methods are fast and easy to implement but they are limited to degradation kinetics having a single peak or individual separated peaks in the mass loss rate. By contrast, the genetic algorithm gives good results if a postulated mechanism of several Arrhenius reactions of arbitrary order is considered. Moreover, the Distributed Activation Energy Model provides the possibility to assess the assumption of overlapping first-order reactions having various activation energies. The degradation of PEEK and its composite is basically characterized by two regimes, one fast degradation regime (570 °C–630 °C approximately) and one much slower degradation regime (630 °C–800 °C approximately) at a mass degradation rate with time being simply proportional to the heating rate, a very remarkable new result by itself. However, the focus of the modelling in this work lies in the first fast degradation regime. It is shown that the Distributed Activation Energy Model and the genetic algorithm can simulate well the experimental results noting, however, that the Distributed Activation Energy Model is based on more physically determined activation energies. By contrast, the classical methods (Kissinger and modified Ozawa methods) are not able to reproduce the mass loss rates in the initial fast degradation regime (570 °C–630 °C) of pure PEEK and PEEK+CF composite. Although a physical explanation of the degradation mechanisms is desirable, the end game is to find out whether a method even not including the whole truth about a process is yet capable of reproducing the measurements accurately.

Internal Pressure-Temperature Coupling Analysis Method for Thermal Decomposition of GFRP Composites Based on the Overlapping Elements Method

Comparison of the in situ compressive behavior of carbon fibers woven ply laminates exposed to one‐sided heat flux: Thermoplastic versus thermosetting composites

Thermomechanical Coupling in Glassy Polymers: an Effective Temperature Theory

Temperature field of thick thermoset composites: Simulation and experimental

Temperature field study and numerical computation of carbon fiber epoxy composite materials under unilateral thermal radiation

Strength degradation of GFRP cross-ply laminates in hydrothermal conditions

Study on the damage mechanism of moisture intrusion to the FRP/RPUF interface of composite cross-arms when considering the influence of temperature

Hygrothermal aging effect on the water diffusion in glass fiber reinforced polymer (GFRP) composite: Experimental study and numerical simulation

Temperature-Dependent Interfacial Debonding and Frictional Behavior of Fiber-Reinforced Polymer Composites

Temperature Distribution of Thick Thermoset Composites

Thermal response and pyrolysis behavior of carbon fiber/phthalonitrile composites under one-sided butane flame heating: Experimental and numerical analysis

Temperature Field in the Heat Transfer Process of PEEK Thermoplastic Composite Fiber Placement

Comparison of methods for thermal analysis: Application to PEEK and a composite PEEK+CF

Investigation of Thermal Decomposition of Polymer Nanocomposites with Different Char Residues

The effects of temperature and hygrothermal aging on the properties of CF/PA6 composite and its compression failure mechanisms

Local thermal non-equilibrium effects on phase transition of fiber reinforced thermoplastic composites with temperature-dependent heat generation

On the Universal Law of the Decomposition of Thermal-Protective Binder Composite Materials at High Temperatures

INVESTIGATION OF THE THERMO-MECHANICAL PROPERTIES OF THERMALPROTECTIVE COMPOSITES UNDER HIGH TEMPERATURE

Effect of thermal and hydrothermal aging on the crashworthiness of carbon fiber reinforced plastic composite tubes

Formability and Failure Mechanisms of Continuous Glass Fiber-Reinforced Polypropylene Composite Laminates in Thermoforming Below the Melting Temperature

About the influence of a thermal aggression on the tensile behaviour of hybrid PEEK thermoplastic laminates