Abstract:The capability to reliably program partial polarization states with nanosecond programming speed and femtojoule energies per bit in ferroelectrics makes them an ideal candidate to realize multibit memory elements for high-density crossbar arrays, which could enable neural network models with a large number of parameters at the edge. However, a thorough understanding of the domain switching dynamics involved in the polarization reversal is required to achieve full control of the multibit capability. Transient current integration measurements are adopted to investigate the domain dynamics in aluminum scandium nitride (Al0.85Sc0.15N) and hafnium zirconium oxide (Hf0.5Zr0.5O2). The switching dynamics are correlated to the crystal structure of the films. The contributions of domain nucleation and domain wall motion are decoupled by analyzing the rate of change of the time-dependent normalized switched polarization. Thermally activated creep domain wall motion characterizes the Al0.85Sc0.15N switching dynamics. The statistics of independently nucleating domains and the domain wall creep motion in Hf0.5Zr0.5O2 are associated with the spatially inhomogeneous distribution of local switching field due to polymorphism, absence of preferential crystallite orientation, as well as defects and charges that can be located at the grain boundaries. The c-axis texture, single-phase nature, and strong likelihood of less fabrication process-induced defects contribute to the homogeneity of the local switching field in Al0.85Sc0.15N. Nonetheless, defects generated and redistributed upon bipolar electric field switching cycling result in Al0.85Sc0.15N domain wall pinning. The wake-up effect in Hf0.5Zr0.5O2 is explained thorough the continuous addition of switchable regions associated with two independent distributions of characteristic switching times.

Demonstration of 10 nm Ferroelectric Al0.7Sc0.3N-Based Capacitors for Enabling Selector-Free Memory Array

Post-CMOS Compatible Aluminum Scandium Nitride/2D Channel Ferroelectric Field-Effect-Transistor Memory.

MoS$_{2}$/Al$_{0.68}$Sc$_{0.32}$N negative capacitance field-effect transistors

Negative capacitance field-effect transistors based on ferroelectric AlScN and 2D MoS2

Multi-State, Ultra-thin, BEOL-Compatible AlScN Ferroelectric Diodes

Fabrication of Ultrathin Ferroelectric Al0.7Sc0.3N Films under Complementary‐Metal‐Oxide‐Semiconductor Compatible Conditions by using HfN0.4 Electrode

Nanoscale Memory Cell Based on a Nanoelectromechanical Switched Capacitor

Ferroelectric domain wall memory with embedded selector realized in LiNbO<sub>3</sub>single crystals integrated on Si wafers

Al0.68Sc0.32N/SiC based metal-ferroelectric-semiconductor capacitors operating up to 900 C

Ferroelectric domain wall memory with embedded selector realized in LiNbO 3 single crystals integrated on Si wafers

Ultrathin AlScN for low-voltage driven ferroelectric-based devices

ScAlN-Based ITO Channel Ferroelectric Field-Effect Transistors With Large Memory Window

Ferroelectric Al0.85Sc0.15N and Hf0.5Zr0.5O2 Domain Switching Dynamics

Multistate, Ultrathin, Back-End-of-Line-Compatible AlScN Ferroelectric Diodes

Ferroelectric domain wall memory with embedded selector realized in LiNbO3 single crystals integrated on Si wafers

High Density And Program-Erasable Metal-Insulator-Silicon Capacitor With A Dielectric Structure Of Sio2/Hfo2-Al2o3 Nanolaminate/Al2o3

FeRAM using Anti-ferroelectric Capacitors for High-speed and High-density Embedded Memory

Perspectives of Ferroelectric Wurtzite AlScN: Material Characteristics, Preparation, and Applications in Advanced Memory Devices

Scalable CMOS back-end-of-line-compatible AlScN/two-dimensional channel ferroelectric field-effect transistors

Enhanced fatigue resistance of ferroelectric Al0.65Sc0.35N deposited by physical vapor deposition

Integration of Ferroelectric Al 0.8 Sc 0.2 N on Si (001) Substrate