Abstract:Ammonia (NH 3 ) is not only a characteristic malodorous contaminant, but also one of the important precursors in the formation of haze. In engineering practice, the most widely used technology for NH 3 purification is adsorption, and the development of adsorbent with excellent NH 3 adsorption capacity is the key to adsorption method. Herein, the surface acidic sites of layered birnessite-type MnO 2 were regulated for the adsorption of NH 3 . Results presented that the adsorption capacity of birnessite-type MnO 2 reinforced by surface acidic sites could reach 36.1 mg/g, which significantly superior to pristine MnO 2 and other commercial carbon materials. In addition, the effects of space velocity, NH 3 concentration, adsorption temperature and relative humidity on its adsorption performance were also studied. It was found that the effect of space velocity and relative humidity had no significant effect on the equilibrium NH 3 adsorption capacity; while the equilibrium adsorption capacity showed an increasing trend with the rise of NH 3 concentration and the decrease of adsorption temperature. Furthermore, the function of surface acidic sites, especially Lewis and Brønsted acidic sites, in the adsorption of birnessite-type MnO 2 for NH 3 was further revealed. On the one hand, the acidic site strengthening method of acid impregnation can significantly increase the specific surface area of birnessite-type MnO 2 , which is beneficial for the physical adsorption of NH 3 . Importantly, this acidic site strengthening method significantly enhances the number and intensity of surface acidic sites of birnessite-type MnO 2 , especially the Brønsted acidic sites, which greatly promoted the adsorption of alkaline gas NH 3 . Finally, the cyclic thermal regeneration performance at low temperatures was further studied. This work reports a strategy to improve NH 3 adsorption performance by enhancing acidic sites, and further reveals the functional role of surface acidic sites in NH 3 adsorption.

Regulation of surface acidic sites on birnessite-type MnO 2 and its function in the adsorption of gaseous ammonia

Regulation of Surface Acidic Sites on Birnessite-Type MnO2 and Its Function in the Adsorption of Gaseous Ammonia

Surface Acidic Sites Strengthened Core-Shell HC@MnO2 for Enhanced Gaseous Ammonia Adsorption.

Surface acidic sites strengthened core-shell HC@MnO 2 for enhanced gaseous ammonia adsorption

Tunnel structured manganese dioxides for the gaseous ammonia adsorption and its regeneration performance

Selective adsorption of trace gaseous ammonia from air by a sulfonic acid-modified silica xerogel: Preparation, characterization and performance

Density Function Theoretical and Experimental Study of Nh3 + Nox Adsorptions on Mnox/Tio2 Surface

Understanding the Adsorption of NH 3 , NO and O 2 on the MnO X /sio 2 Β-Cristobalite (101) Surface with Density Functional Theory

Understanding the Adsorption of NH3, NO and O2 on the MnOx/SiO2 Β-Cristobalite (101) Surface with Density Functional Theory

Influence of the Surface Properties of Mesoporous Carbon on the Adsorption Removal of Ammonia under Low Concentration Conditions

Enhancement of Acidic Sites in Layered MnO2 for the Highly Efficient Selective Catalytic Oxidation of Gaseous Ammonia

Adsorption Properties of NO and NH3 over MnOx Based Catalyst Supported on Γ-Al2o3

Mesoporous Carbon Beads Impregnated with Transition Metal Chlorides for Regenerative Removal of Ammonia in the Atmosphere

NH3 adsorption on PtM (Fe, Co, Ni) surfaces: cooperating effects of charge transfer, magnetic ordering and lattice strain

Interface Modulation of Mn-N4-C with Optimized Oxygen-Containing Functional Groups for Highly Efficient Mercury Adsorption.

Efficient Adsorption of Ammonia by Surface-Modified Activated Carbon Fiber Mesh

Modulation of paired acid centers for the -, -, - and -MnO<sub>2</sub> for the NH<sub>3</sub>-SCR: A comparative density functional theory (DFT) study

Construction of −SO3H and Zn2+ Dual Active Sites over Silica Aerogel for NH3 Adsorption: Collaborative Efficiency Enhancement Performance and Mechanism

Effects of Mno2 Crystal Structure and Surface Property on the Nh3-Scr Reaction at Low Temperature

Adsorption and Photocatalytic Degradation of Ammonia: Status and Challenges

The role of surface functionality of sustainable mesoporous materials Starbon (R) on the adsorption of toxic ammonia and sulphur gasses