Abstract:The bidirectional output fiber laser can achieve two laser outputs from a single resonant cavity, which can reduce the volume and cost of high-power fiber laser systems and has good application prospects in the industry. In this work, we demonstrated a bidirectional output fiber laser oscillator structure, and a total output power of 8 kW at the 2 ports × 4 kW level was achieved experimentally for the first time. In order to suppress stimulated Raman scattering (SRS) and transverse mode instability (TMI), the double cladding ytterbium-doped fiber with a core/cladding diameter of 30/400 μm, a pair of matched output coupler fiber Bragg gratings (OCFBG) with a 3 dB bandwidth of 2 nm, and the pump source with wavelength-stabilized 981 nm laser diodes (LDs) were employed. The effect of the coiling method and diameter of the active fiber on the optical-to-optical (O-O) efficiency and TMI threshold were studied intensively. The comparison of laser performance with a unidirectional output oscillator was further exploited, and results indicated that the bidirectional output fiber laser oscillator possessed a higher O-O efficiency and TMI threshold. By optimizing the fiber coiling diameter and coiling method, we finally achieved a total laser output power of 8169 W (3769 W at end A and 4400 W at end B), with an efficiency of 74.6% and beam quality of M 2 A ∼ 2.13, M 2 B ∼ 2.36, while the total output power achieved by unidirectional output structure was only 5805 W with signs of TMI. To the best of our knowledge, it is the highest output power of the bidirectional output fiber laser.

5 kW single-mode oscillating-amplifying integrated fiber laser through tightly bent confined ytterbium-doped fiber

Fiber-solid, Hybrid, Single-Frequency Laser (100 W) with a 100 MHz Repetition Rate and 1 Ns Pulse Width from a Spherical Aberration Compensated Four-Stage Nd:YVO4 Amplifier

66 fs, 3 W all fiber Yb3+-doped mode-locked fiber laser

A Simple Approach to Fiber-Based Tunable Microcavity with High Coupling Efficiency

A 3.5-kW near-single-mode oscillating–amplifying integrated fiber laser

A 5 kW Nearly-Single-Mode Monolithic Fiber Laser Emitting at ~1050 nm Employing Asymmetric Bi-Tapered Ytterbium-Doped Fiber

Optimization and demonstration of 6 kW oscillating-amplifying integrated fiber laser employing spindle-shaped fiber to suppress SRS and TMI

A 3.7-kW Oscillating-Amplifying Integrated Fiber Laser Featuring a Compact Oval-Shaped Cylinder Package

1.75‐Kilowatt continuous‐wave output fiber laser using homemade ytterbium‐doped large‐core fiber

4.115kW near diffraction-limited high quality fiber laser based on 25/400μm fiber

2 × 4.5 kW bidirectional output near-single-mode quasi-continuous wave monolithic fiber laser

A Widely Tunable Single-Longitudinal-mode Ytterbium-Doped Fiber Laser Based on Fiber Lyot Filter

Narrow Line-Width Ytterbium-Doped Fiber Ring Laser Based on Saturated Absorber

All-fiberized and narrow-linewidth 5 kW power-level fiber amplifier based on a bidirectional pumping configuration

A 4.8-kW high-efficiency 1050-nm monolithic fiber laser amplifier employing a pump-sharing structure

Optimization and demonstration of a bidirectional output linear-cavity fiber laser with a record high power of 2 × 4 kW

Single-mode large-mode-area laser fiber with ultralow numerical aperture and high beam quality

Yb/Ce Codoped Aluminosilicate Fiber With High Laser Stability for Multi-kW Level Laser

Confined-doped fiber enabled kilowatt-level all-fiber laser with 1.28 GHz linewidth

Demonstration of 3kW × 2 ports bidirectional output oscillating-amplifying integrated fiber laser employing chirped and tilted fiber Bragg gratings for co-SRS suppression

1010 nm Directly LD-Pumped 6kW Monolithic Fiber Laser Employing Long-Tapered Yb3+-Doped Fiber