Tyrosinase enhances the covalent modification of DNA by dopamine.

Alan H. Stokes,B. Brown,Chin K. Lee,D. Doolittle,Kent E. Vrana

DOI: https://doi.org/10.1016/S0169-328X(96)00164-7

1996-11-01

Abstract:

What problem does this paper attempt to address?

Design and Compliance Control of Rehabilitation Exoskeleton for Elbow Joint Anchylosis

Sihan Zhang,Qiuguo Zhu,Jun Wu,Rong Xiong,Yong Gu

DOI: https://doi.org/10.1109/aim43001.2020.9158829

2020-01-01

Abstract:A rehabilitation exoskeleton is designed for treatment of elbowjoint anchyloses. Using the Matland Grading Standards method, a series elastic actuator (SEA)basedjoint and its compliance controller for rehabilitation training are designed in this paper. A novel torsional spring is designed with a symmetrical structure for a bidirectional load capacity. This spring was embedded in the elbow of the exoskeleton to act as the SEA activejoint and then worked as a torque sensor, too. We also designed the torque controller and the compliance controller to meet the requirements of the treatment. Successful implementation of the controller in a rehabilitation exoskeleton robot verified the feasibility and realizability of the device. The experimental validation was performed rigorously and the data from the experiments are presented and analyzed.
Optimal design of active-passive shoulder exoskeletons: a computational modeling of human-robot interaction

Ali Nasr,Sydney Bell,John McPhee

DOI: https://doi.org/10.1007/s11044-022-09855-8

IF: 3.4

2022-11-24

Multibody System Dynamics

Abstract:Exoskeleton robots, which range from fully passive to fully active-assisted movements, have become an essential instrument for assisting industrial employees and stroke rehabilitation therapy. Designing the exoskeleton actuation is challenging and time-consuming due to closed kinematic loops in the 3D human-exoskeleton multibody model, complicated interactions, and interdependent selection of power transmission features. This research proposes a process for dynamic syntheses of passive and active assistive shoulder exoskeletons. First, a multibody model was developed using six components: an upper-body musculoskeletal model, an optimal controller, the exoskeleton's rigid body, a passive mechanism, a powered actuator, and an assistance model. The desired motion was experimentally measured from six tasks: frontal reaching, left to right reaching, overhead reaching, sagittal-plane object handling, frontal-plane object handling, and over-head object handling. The system design was optimized by choosing features of the passive mechanism and exoskeleton motor such that the human joint active torque, power, muscle metabolic energy expenditure, and actuator electricity consumption were minimized. The dynamic synthesis processes were found to be successful, and the resultant optimized active-passive exoskeletons allow for the creation of lighter and smaller wearable robots that reduce the user's muscular activation torque for the tasks being studied.

mechanics
Dynamic analysis and design of a multipurpose lower limb exoskeleton for rehabilitation

Gang Li,Qiying Su,Wenqiu Xi,Zhendong Song,Renren Bao,Zhenjun Du

DOI: https://doi.org/10.1177/17298806221135140

IF: 1.714

2022-11-01

International Journal of Advanced Robotic Systems

Abstract:To solve some defects of exoskeleton robot at present, this article establishes the dynamic model of human lower limb. The torque curves for hip joint and knee joint are obtained. A dynamics simulation is conducted in ADAMS which will guide the selection of motors and reducers for exoskeleton joints. Three structural design projects for leg and an integrated joint with the function of force perception are proposed. Then a lightweight exoskeleton is put forward and a kinematics simulation of man–machine coupling system is carried out in ADAMS. This article sets up a 24-V low-voltage control electrical system and a rehabilitation training expert system. Some performance tests and clinical experiments are carried out by an experimental prototype. The results show that the joints have sufficient driving torque. Leg structure has large adjustment range and self-locking function. The exoskeleton has lightweight and does not interfere with human body during movement. The expert system has a friendly operation interface and abundant functions. Clinical experimental results show that lower limb exoskeleton has good rehabilitation effect for some diseases.

robotics
Design, simulation, and experimental evaluation of a light weight, and wearable cable driven ForeWrist exoskeleton robot for assistance and rehabilitation

Danaish,Han Liang,Gelin Xu,Mohammad Abbas Baig,Yangzhen Gao,GuanCheng Dong,Xu Zongliang

DOI: https://doi.org/10.1007/s11370-024-00558-x

2024-08-31

Intelligent Service Robotics

Abstract:Injuries and diseases such as wrist nerve injuries, stroke, neurological disorders, and other wrist-related conditions have significantly impacted people's quality of life. This study aims to develop a lightweight, affordable, and portable ForeWrist (forearm and wrist) exoskeleton. This device is intended to assist and rehabilitate individuals with wrist disabilities, mainly stroke survivors, to enhance wrist range of motion and strength. The device can offer one active degree of freedom (DOF) responsible for pronation-supination (PS) of the forearm and two passive DOFs for the wrist joint. The design of the ForeWrist PS mainly consists of a cable-driven C-shaped guide rail and stationary bearing-carriage mechanism that can be attached to the user's wrist. The simulation and experimental analysis are conducted for the design validation and performance analysis. The experimental results indicate that the designed device should demonstrate promising potential for practical applications. The root mean squared error for joint position and velocity exhibit low values, and the peak torque for an average weight of the human lower arm was found to be under 10% of the device's total capacity. The developed exoskeleton provides a full range of motion for daily activities and covers 75% of the forearm's total range of motion with a consistency error of less than . The device can be effective for both at home and outdoor assistance and rehabilitation training with its low weight of 300 g and peak velocity and torque of 70 deg/sec and 6 Nm, respectively.

robotics
Design and Performance Analysis of a Bioelectronic Controlled Hybrid Serial-Parallel Wrist Exoskeleton

Xueze Zhang,Minjie Wang,Hongbo Wang,Fuhao Wang,Li Chen,Wei Mu,Junkongshuai Wang,Xiaoyang Kang

DOI: https://doi.org/10.1109/TNSRE.2023.3283603

IF: 4.9

2023-01-01

IEEE Transactions on Neural Systems and Rehabilitation Engineering

Abstract:Wrist exoskeletons are increasingly being used in the rehabilitation of stroke and hand dysfunction because of its ability to assist patients in high intensity, repetitive, targeted and interactive rehabilitation training. However, the existing wrist exoskeletons cannot effectively replace the work of therapist and improve hand function, mainly because the existing exoskeletons cannot assist patients to perform natural hand movement covering the entire physiological motor space (PMS). Here, we present a bioelectronic controlled hybrid serial-parallel wrist exoskeleton HrWr-ExoSkeleton (HrWE) which is based on the PMS design guidance, the gear set can carry out forearm pronation/supination (P/S) and the 2-DoF parallel configuration fixed on the gear set can carry out wrist flexion/extension (F/E) and radial/ulnar deviation (R/U). This special configuration not only provides enough range of motion (RoM) for rehabilitation training (85F/85E, 55R/55U, and 90P/90S), but also makes it easier to provide the interface for finger exoskeletons and be adapted to upper limb exoskeletons. In addition, to further improve the rehabilitation effect, we propose a HrWE-assisted active rehabilitation training platform based on surface electromyography signals.
A simulation-based framework with a proprioceptive musculoskeletal model for evaluating the rehabilitation exoskeleton system

Fuhao Mo,Qiang Zhang,Haotian Zhang,Jianjun Long,Yulong Wang,Gong Chen,Jing Ye

DOI: https://doi.org/10.1016/j.cmpb.2021.106270

IF: 6.1

2021-09-01

Computer Methods and Programs in Biomedicine

Abstract:Background and Objective. Various rehabilitation exoskeletons have been designed to help people regain normal gait from stroke effects. However, the evaluation and further optimization of these exoskeletons are not convenient and usually need complicated experimental works. The present study aims to establish a simulation-based method with a proprioceptive musculoskeletal model to conveniently evaluate the efficiency of a self-developed exoskeleton for further optimization. Methods. Three volunteers who suffer from dyskinesia due to stroke were recruited for gait experiments with and without the self-develop exoskeleton. The corresponding simulations were implemented based on the proprioceptive model, the exoskeleton model, and the input kinematic data obtained from the experiments. The joint angles, muscle activations, and metabolic costs as well as the proprioceptor feedback stimulation were extracted for comparative analysis. Result. Several positive effects of the exoskeleton were noted based on the simulation results when using it to aid the patients' rehabilitation during the gait training. The CORA scores of the patients' joint angle to the normal data increased by 11.6%∼37.8% with the assistance of the exoskeleton. The wave frequency of proprioceptive feedback stimulation that can be directly correlated to the neural rehabilitation obviously inclined during a gait cycle. The muscle activations were also rearranged to better support the patient's walk when using the exoskeleton, while the metabolic costs were reduced for all the patients. Conclusion In summary, the present simulation-based method can be practical for pre-evaluation and optimization of various exoskeleton design in the future.

engineering, biomedical,computer science, interdisciplinary applications,medical informatics, theory & methods
Motion optimization and parameter identification for a human and lower-back exoskeleton model

Paul Manns,Manish Sreenivasa,Matthew Millard,Katja Mombaur

DOI: https://doi.org/10.1109/LRA.2017.2676355

2018-03-15

Abstract:Designing an exoskeleton to reduce the risk of low-back injury during lifting is challenging. Computational models of the human-robot system coupled with predictive movement simulations can help to simplify this design process. Here, we present a study that models the interaction between a human model actuated by muscles and a lower-back exoskeleton. We provide a computational framework for identifying the spring parameters of the exoskeleton using an optimal control approach and forward-dynamics simulations. This is applied to generate dynamically consistent bending and lifting movements in the sagittal plane. Our computations are able to predict motions and forces of the human and exoskeleton that are within the torque limits of a subject. The identified exoskeleton could also yield a considerable reduction of the peak lower-back torques as well as the cumulative lower-back load during the movements. This work is relevant to the research communities working on human-robot interaction, and can be used as a basis for a better human-centered design process.

Robotics,Optimization and Control
Diode-pumped Pr:BaY2F8 continuous-wave orange laser.

D. Pabœuf,O. Mhibik,F. Bretenaker,P. Goldner,D. Parisi,M. Tonelli

DOI: https://doi.org/10.1364/OL.36.000280

IF: 3.6

2010-11-04

Optics Letters

Abstract:We report the realization of the continuous wave laser emission in the orange at 607 nm from a Pr:BaY(2)F(8) (Pr:BYF) crystal pumped by a blue GaN laser diode. A maximal output power of 78 mW is obtained in a quasi-single transverse mode beam. The effect of reabsorption losses at the laser wavelength is also evidenced.
Enhanced Optimization Strategies to Design an Underactuated Hand Exoskeleton

Baris Akbas,Huseyin Taner Yuksel,Aleyna Soylemez,Mine Sarac,Fabio Stroppa

2024-08-14

Abstract:Exoskeletons can boost human strength and provide assistance to individuals with physical disabilities. However, ensuring safety and optimal performance in their design poses substantial challenges. This study presents the design process for an underactuated hand exoskeleton (U-HEx), first including a single objective (maximizing force transmission), then expanding into multi objective (also minimizing torque variance and actuator displacement). The optimization relies on a Genetic Algorithm, the Big Bang-Big Crunch Algorithm, and their versions for multi-objective optimization. Analyses revealed that using Big Bang-Big Crunch provides high and more consistent results in terms of optimality with lower convergence time. In addition, adding more objectives offers a variety of trade-off solutions to the designers, who might later set priorities for the objectives without repeating the process - at the cost of complicating the optimization algorithm and computational burden. These findings underline the importance of performing proper optimization while designing exoskeletons, as well as providing a significant improvement to this specific robotic design.

Robotics,Human-Computer Interaction,Neural and Evolutionary Computing
A Case of Recurrent Ischemic Stroke due to Intravascular Lymphomatosis, Undiagnosed by Random Skin Biopsy and Brain Imaging

Yuichiro Ohya,M. Osaki,S. Sakai,S. Kimura,Tatsuro Shimogamo,T. Ago,T. Kitazono,S. Arakawa

DOI: https://doi.org/10.1159/000478996

2017-09-01

Case Reports in Neurology

Abstract:Intravascular lymphoma (IVL) is a rare disease characterized by the proliferation of lymphoma cells in the lumen of the small blood vessels. Although early diagnosis of IVL is important to prolong survival of the patients, its atypical symptoms and clinical course often delay its diagnosis. More than half of the patients are diagnosed at autopsy. We report a 68-year-old man who presented with transient ideomotor apraxia and mildly elevated soluble interleukin-2 receptor levels. He was initially diagnosed with aortogenic embolic stroke. He developed rapidly progressive neurological manifestations with enlargement of brain lesions on brain computed tomography and magnetic resonance imaging and died 3 months after symptom onset. The diagnosis of IVL could not be made by random skin biopsy, but was finally made at autopsy. For the early diagnosis, sufficient random skin biopsy or brain biopsy should be planned when suspected.
Analysis of movement of an elbow joint with a wearable robotic exoskeleton Using OpenSim software

Vahid Noei,Heba Lakany

DOI: https://doi.org/10.1109/EMBC48229.2022.9871441

Abstract:Human body movement occurs as a result of a coordinated effort between the skeleton, muscles, tendons, ligaments, cartilage, and other connective tissue. The study of movement is crucial in the treatment of some neurological and musculoskeletal diseases. The advancement of science and technology has led to the development of musculoskeletal model simulation software such as OpenSim that plays a very significant role in tackling complex bioengineering challenges and assists in our understanding of human movement. Such biomechanical models of musculoskeletal systems may also facilitate medical decision-making. Through fast and accurate calculations, OpenSim modelling enables prediction and visualisation of motion problems. OpenSim has been used in many studies to investigate and assess movements of the upper limb under various scenarios. This work investigates elbow movement of a paretic arm wearing a myoelectric robotic exoskeleton. The simulation focuses on the exoskeleton elbow joint with one degree of freedom for individuals that we have developed to support and rehabilitate a weakened/paretic arm due to a spinal cord injury for example. Accordingly, it simulates the kinematic characteristics of the human arm whilst the exoskeleton assists the arm flexion/extension to maximise its range of motion. To obtain the motion data required for this study, a forward dynamics method must be implemented. Firstly, inverse kinematics is applied to the joint angles, and then, the torque and force required for angular motion of the elbow joint are calculated using forward dynamics. The results show that the muscle forces required to generate an elbow flexion are considerably less when the exoskeleton is worn. Clinical Relevance--- The exoskeleton assists patients to extend and flex their arm, thus supporting rehabilitation and arm function during activities of daily living. Exoskeleton movement is derived from residual myoelectric signals extracted from the patient's arm muscles. Modelling the dynamics and kinematics of the arm with the exoskeleton can reveal and predict any movement issues that need to be addressed.
Design and Optimization of Lower Limb Rehabilitation Exoskeleton with a Multiaxial Knee Joint

Jiandong Jiang,Peisong Chen,Jiyu Peng,Xin Qiao,Fengle Zhu,Jiang Zhong

DOI: https://doi.org/10.3390/biomimetics8020156

2023-04-14

Abstract:To facilitate rehabilitation training for patients, we proposed the implementation of an anthropomorphic exoskeleton structure that incorporates a variable instantaneous center of rotation (ICR). This design considers the variability in knee ICR among individuals, resulting from the irregular form of the human knee joint, and leverages a double-degrees-of-freedom (2DOF) five-bar mechanism to adapt to these differences. The walking gait of the human lower limb and the corresponding knee ICR were measured and calculated using an optical 3D motion capture system. The optimal dimension parameters of the five-bar mechanism were then obtained through the optimization of human movement position inputs and rod length constraints to minimize the error in knee ICR, gait angle, and ankle trajectory between the human and the exoskeleton. Finally, we established an exoskeleton prototype to conduct relevant experimental tests. The experiment results showed that the average errors of knee ICR trajectory, hip angle, knee angle, and ankle trajectory were 5.52 × 10-4 m, 0.010 rad, 0.014 rad, and 1.57 × 10-3 m, respectively. The experimental results demonstrated that the exoskeleton's movement trajectory was close to the human's, reducing the human-mechanism interaction force and improving patient comfort during rehabilitation training.
Rosétte formation between human b lymphocytes and zymosan-C3 complexes using different complement sources.

A. Kajdacsy-Balla,N. Mendes

DOI: https://doi.org/10.1016/0022-1759(76)90195-2

Abstract:
Biofusion design and parameter optimization for a novel passive assisted knee exoskeleton robot based on eight-bar mechanism

Jun Wei,Shizhao Zhang,Jianjun Zhang

DOI: https://doi.org/10.1017/s0263574724000699

IF: 2.7

2024-05-10

Robotica

Abstract:In an effort to alleviate the issue of knee joint fatigue and injury during lower limb ambulation, a novel passive assisted exoskeleton robot with human–machine interaction is investigated to assist the movement of the human knee joint. The design of the exoskeleton configuration takes into consideration the physiological structure and gait function of the knee joint, ensuring that it satisfies the requirements for motion, force, and gait function of the knee joint. To explore the interaction between the wearer and the exoskeleton, a human–machine kinematic model after wearing exoskeleton is established, which is instrumental in analyzing the integration motion of the wearer and exoskeleton. In addition, the dynamic and static models of the knee joint after wearing the exoskeleton are established, utilizing the Newton–Euler method and force polygon method, respectively, to evaluate the effectiveness of the exoskeleton. Moreover, the size parameters and spring stiffness of the exoskeleton are optimized, using both human body kinematic model and mechanic model. Furthermore, the effectiveness of the exoskeleton in proving assistance is evaluated through human body simulation, using OpenSim. The results indicate that the exoskeleton significantly reduces the knee joint torque by 48.42%.

robotics
Conceptual design and virtual prototyping of a wearable upper limb exoskeleton for assisted operations

Pietro Bilancia,Giovanni Berselli

DOI: https://doi.org/10.1007/s12008-021-00779-9

2021-10-22

International Journal on Interactive Design and Manufacturing (IJIDeM)

Abstract:Abstract This paper introduces a novel upper limb robotic exoskeleton designed to assist industrial operators in a wide range of manual repetitive tasks, such as tool handling and lifting/moving of heavy items. Due to its reduced size and high maneuverability, the proposed portable device may also be employed for rehabilitation purposes (e.g. as an aid for people with permanent neuromuscular diseases or post-stroke patients). Its primary function is to compensate the gravity loads acting on the human shoulder by means of a hybrid system consisting of four electric motors and three passive springs. The paper focuses on the exoskeleton mechanical design and virtual prototyping. After a preliminary review of the existent architectures and procedures aimed at defining the exoskeleton functional requirements, a detailed behavioral analysis is conducted using analytical and numerical approaches. The developed interactive model allows to simulate both kinematics and statics of the exoskeleton for every possible movement within the design workspace. To validate the model, the results have been compared with the ones achieved with a commercial multibody software for three different operator’s movements.
Human-Exoskeleton Coupling Simulation for Lifting Tasks with Shoulder, Spine, and Knee-Joint Powered Exoskeletons

Asif Arefeen,Ting Xia,Yujiang Xiang

DOI: https://doi.org/10.3390/biomimetics9080454

2024-07-25

Abstract:In this study, we introduce a two-dimensional (2D) human skeletal model coupled with knee, spine, and shoulder exoskeletons. The primary purpose of this model is to predict the optimal lifting motion and provide torque support from the exoskeleton through the utilization of inverse dynamics optimization. The kinematics and dynamics of the human model are expressed using the Denavit-Hartenberg (DH) representation. The lifting optimization formulation integrates the electromechanical dynamics of the DC motors in the exoskeletons of the knee, spine, and shoulder. The design variables for this study include human joint angle profiles and exoskeleton motor current profiles. The optimization objective is to minimize the squared normalized human joint torques, subject to physical and task-specific lifting constraints. We solve this optimization problem using the gradient-based optimizer SNOPT. Our results include a comparison of predicted human joint angle profiles, joint torque profiles, and ground reaction force (GRF) profiles between lifting tasks with and without exoskeleton assistance. We also explore various combinations of exoskeletons for the knee, spine, and shoulder. By resolving the lifting optimization problems, we designed the optimal torques for the exoskeletons located at the knee, spine, and shoulder. It was found that the support from the exoskeletons substantially lowers the torque levels in human joints. Additionally, we conducted experiments only on the knee exoskeleton. Experimental data indicated that using the knee exoskeleton decreases the muscle activation peaks by 35.00%, 10.03%, 22.12%, 30.14%, 16.77%, and 25.71% for muscles of the erector spinae, latissimus dorsi, vastus medialis, vastus lateralis, rectus femoris, and biceps femoris, respectively.
Allosteric regulation of cloned m1-m5 muscarinic receptor subtypes.

J. Ellis,Joanne H. Huyler,M. Brann,M. Brann

DOI: https://doi.org/10.1016/0006-2952(91)90591-R

IF: 6.1

1991-10-24

Biochemical Pharmacology

Abstract:
KULEX-Wrist: Design and Analysis of Linkage-Driven Exoskeleton for Wrist Assistance

Man Bok Hong,Dukchan Yoon,Jaehyun Park,Keehoon Kim

DOI: https://doi.org/10.1115/1.4064491

2024-01-12

Journal of Mechanical Design

Abstract:Abstract This paper presents a wrist exoskeleton called the KULEX (KIST Upper-Limb EXoskeleton)-wrist for activities of daily living assistance of the elderly and the disabled. A novel linkage-based structure of the rotational mechanism with three degrees of freedom is proposed. The proposed wrist mechanism is composed of two PUS (Prismatic-Universal-Spherical) serial chains and one RRR (Revolute-Revolute-Revolute) spherical chain. Besides, a combination of a planar slider-crank and spherical four-bar linkages was employed as a driving mechanism for power transmission. Kinematic analysis was conducted to understand its working principle. Then, the dimensions of all the linkages were synthesized to meet the structural design suitable for the wearable exoskeleton and the transmission quality. In addition, motion twists and wrenches were geometrically derived. Finally, a prototype of the KULEX-wrist was designed, and then its performance of mechanical stiffness, motion capability, and power assistance was verified.

engineering, mechanical
Design and Analysis of Upper Limb Passive Exoskeleton Robot for Lift Assist

Yeyan Ning,Yunji Li,Zhenyu Zhang,Jun Cai,Chunlei Wang

DOI: https://doi.org/10.1088/1742-6596/2410/1/012020

2022-12-01

Journal of Physics: Conference Series

Abstract:Abstract . Exoskeleton robots are developing rapidly in the field of industrial manufacturing and medical rehabilitation as an intelligent wearable power assist device, which can reduce the lifting burden and muscle fatigue. Existing upper limb passive exoskeleton robots still need to be improved for human-machine integration. In this paper, by establishing a human kinematic model and a lumbar spine motion model, the lifting assist is analyzed, and the design principle of human-machine integration is used to complete the passive upper limb. In structural design, the exoskeleton robot is divided into 4 structural modules, combined with the specific motion form of the spring energy storage module to complete the cam curve design, and the EMG test system is used to collect the surface EMG of the user without wearing and wearing the exoskeleton robot. According to the signal EMG data, the experiment shows that the amplitude of the muscle EMG signal in the wearing state is smaller than that of the non-wearing muscle EMG signal, and the amplitude of the muscle activation amplitude varies from 0 to 10%, which verifies the effectiveness of the upper limb passive exoskeleton.
Design and Evaluation of Torque Compensation Controllers for a Lower Extremity Exoskeleton

Xianlian Zhou,Xinyu Chen

DOI: https://doi.org/10.1115/1.4048572

2020-10-08

Journal of Biomechanical Engineering

Abstract:Abstract In this article, we present an integrated human-in-the-loop simulation paradigm for the design and evaluation of a lower extremity exoskeleton that is elastically strapped onto human lower limbs. The exoskeleton has three rotational DOFs on each side and weighs 23 kg. Two torque compensation controllers of the exoskeleton are introduced, aiming to minimize interference and maximize assistance, respectively. Their effects on the wearer's biomechanical loadings are studied with a running motion and predicted ground reaction forces (GRFs). It is found that the added weight of the passive exoskeleton substantially increases the wearer's musculoskeletal loadings. The maximizing assistance controller reduces the knee joint torque by 31% when compared with the normal running (without exoskeleton) and by 50% when compared with the passive exoskeleton case. When compared with the normal running, this controller also reduces the hip flexion and extension torques by 31% and 38%, respectively. As a result, the peak activations of the biceps short head, gluteus maximus, and rectus femoris muscles are reduced by more than a half. Nonetheless, the axial knee joint reaction force increases for all exoskeleton cases due to the added weight and higher ground reaction forces. In summary, the results provide sound evidence of the efficacy of the proposed controllers on reducing the wearer's musculoskeletal loadings. And it is shown that the human-in-the-loop simulation paradigm presented here can be used for virtual design and evaluation of powered exoskeletons and pave the way for building optimized exoskeleton prototypes for experimental evaluation.

English Else

Tyrosinase enhances the covalent modification of DNA by dopamine.

Design and Compliance Control of Rehabilitation Exoskeleton for Elbow Joint Anchylosis

Optimal design of active-passive shoulder exoskeletons: a computational modeling of human-robot interaction

Dynamic analysis and design of a multipurpose lower limb exoskeleton for rehabilitation

Design, simulation, and experimental evaluation of a light weight, and wearable cable driven ForeWrist exoskeleton robot for assistance and rehabilitation

Design and Performance Analysis of a Bioelectronic Controlled Hybrid Serial-Parallel Wrist Exoskeleton

A simulation-based framework with a proprioceptive musculoskeletal model for evaluating the rehabilitation exoskeleton system

Motion optimization and parameter identification for a human and lower-back exoskeleton model

Diode-pumped Pr:BaY2F8 continuous-wave orange laser.

Enhanced Optimization Strategies to Design an Underactuated Hand Exoskeleton

A Case of Recurrent Ischemic Stroke due to Intravascular Lymphomatosis, Undiagnosed by Random Skin Biopsy and Brain Imaging

Analysis of movement of an elbow joint with a wearable robotic exoskeleton Using OpenSim software

Design and Optimization of Lower Limb Rehabilitation Exoskeleton with a Multiaxial Knee Joint

Rosétte formation between human b lymphocytes and zymosan-C3 complexes using different complement sources.

Biofusion design and parameter optimization for a novel passive assisted knee exoskeleton robot based on eight-bar mechanism

Conceptual design and virtual prototyping of a wearable upper limb exoskeleton for assisted operations

Human-Exoskeleton Coupling Simulation for Lifting Tasks with Shoulder, Spine, and Knee-Joint Powered Exoskeletons

Allosteric regulation of cloned m1-m5 muscarinic receptor subtypes.

KULEX-Wrist: Design and Analysis of Linkage-Driven Exoskeleton for Wrist Assistance

Design and Analysis of Upper Limb Passive Exoskeleton Robot for Lift Assist

Design and Evaluation of Torque Compensation Controllers for a Lower Extremity Exoskeleton