Abstract:3-D Hybrid halide perovskites (HHPs) have garnered significant interest as a promising contender for next-generation resistive random access memory (ReRAM) technology. However, challenges such as variations in cycle-to-cycle switching iterations, operating voltages, and restrained reproducibility arise due to the disproportionate presence of grain size (GS) and grain boundaries (GBs), which are impediments to the widespread adoption of perovskite-based memory devices in commercial applications. Since GBs present in the thin film act as pathways for ion/cation migrations that eventually lead to the formation of conducting filament (CF), by regulating GBs, the resistive switching (RS) performance of the memory devices can also be improved. Herein, we initially optimized GS and thus GBs in the 3-D HHP thin film by the incorporation of FA+ in the MAPbI3 3-D HHP to prepare double-cation 3-D MAFAPbI3 HHP and determined that the doping of 10% FAI improved the MAFAPbI3 film quality with an average grain size of ∼209.68 and 6.65 nm surface roughness, resulting in higher GBs that led to the stable RS of the fabricated Ag/MAFAPbI3/FTO up to 491 cycles under dark conditions and 245 cycles under white light illumination with significantly low statistical variations (σ/μ %) in the consecutive switching cycles. This performance was achieved while maintaining low-resistance states (LRS) and high-resistance-states (HRS) ratios, i.e., LRS/HRS of ∼15.2 (dark) and ∼54.3 (white light) conditions at power consumption of ∼0.101 mW. Further, to improve LRS/HRS, the PEAI passivation layer was deposited over the optimized MAFAPbI3 switching layer (SL) through spin-coating, and the fabricated Ag/PEAI/MAFAPbI3/FTO ReRAM configuration exhibited LRS/HRS ∼105 at considerably low power, i.e., 0.12 and 0.23 mW while operating under dark and white light illumination, respectively. Furthermore, the RS mechanisms of Ag/MAFAPbI3/FTO and Ag/PEAI/MAFAPbI3/FTO were discussed and supported by the electrochemical metallization (ECM) model.

Attaining inhibition of sneak current and versatile logic operations in a singular halide perovskite memristive device by introducing appropriate interface barriers

Reversible Transition of Volatile to Non-Volatile Resistive Switching in Cu/SiNx/ZnO/Pt Memristor

Bipolar resistive switching in MAPbI[math]Cl[math] mixed halide perovskite with polyvinylpyrrolidone additives

Rare earth halide double perovskites for high-performance resistive random access memory

Quasi-2D halide perovskites for resistive switching devices with ON/OFF ratios above 109

Optically Tunable Ultra-Fast Resistive Switching in Lead-Free Methyl-Ammonium Bismuth Iodide Perovskite Films.

In Situ Unveiling of the Resistive Switching Mechanism of Halide Perovskite-Based Memristors

Opto-Electric Resistive Switching and Synaptic Emulation in Lead-Free Perovskite Film

Resistive switching in benzylammonium-based Ruddlesden–Popper layered hybrid perovskites for non-volatile memory and neuromorphic computing

Down-Scalable and Ultra-fast Memristors with Ultra-high Density Three-Dimensional Arrays of Perovskite Quantum Wires

Interface Engineering With Mos2-Pd Nanoparticles Hybrid Structure For A Low Voltage Resistive Switching Memory

Simultaneous resistance switching and rectifying effects in a single hybrid perovskite

Reconfigurable halide perovskite nanocrystal memristors for neuromorphic computing

Controllable Resistive Switching in ReS2/WS2 Heterostructure for Nonvolatile Memory and Synaptic Simulation

Zeolitic-imidazolate framework (ZIF-67) based bipolar memristor for nonvolatile ReRAM application

Purely electronic nanometallic resistance switching random-access memory

Purely electronic nanometallic ReRAM

Electro-Optically Tunable Passivated Double-Cation Perovskite-Based ReRAM for Low-Power Memory Applications

Bifunctional resistive switching behavior in an organolead halide perovskite based Ag/CH3NH3PbI3−xClx/FTO structure

Controllable Extrinsic Ion Transport in Two-Dimensional Perovskite Films for Reproducible, Low-Voltage Resistive Switching

Self-rectifying Resistance Switching Memory Based on a Dynamic P–n Junction