Abstract:Ceramic Li6.55Al0.2La3Zr2O12 (LLZO) is one of the most attractive electrolyte materials for solid-state batteries that combined with metallic Li anodes holds the promise for safer and more energetically dense battery, but its performance is limited by the increases in electrolyte-electrode interfacial resistances upon cycling. The combination of Li + -conducting ceramics and polymers offers a new pathway to create better electrolytes with both high ionic conductivity and good (electro)mechanical interfacial properties. We optimized two-step annealing processing conditions for the fabrication of low temperature cubic-LLZO nanofibers and Li 2 CO 3 removal from the surface of the nanofibers. Using industrially relevant roll-to-roll electrospinning and slot-die coating, we fabricated thin composite membranes with reproducible thickness down to 50 microns. We investigated PEO based composite polymer electrolyte (CPE) with a high, 50 wt% loading of Al-doped LLZO nanofibers in comparison with nanofiber-free PEO electrolyte. XPS measurements show that LLZO is not present at the composite electrolyte surface, and solid electrolyte interphase (SEI) formation is dictated solely by PEO and LiTFSI when reacting with Li metal. Electrochemical SEI formation, studied by cyclic voltammetry, shows SEI formation is identical with and without up to 75 wt% LLZO in the electrolyte. Galvanostatic cycling with lithium symmetric cells shows that the critical current density (CCD) can be tripled by including 50 wt% LLZO, but half cell cycling reveals this comes at the cost of CE. Varying the LLZO loading shows that even a small amount of LLZO drastically lowers the CE, from 88% at 0 wt% LLZO to 77% at just 2 wt% LLZO. Mesoscale modelling reveals that the increase in CCD cannot be explained by an increase in the macroscopic or microscopic stiffness of the electrolyte; only the microstructure of the LLZO nanofibers in the PEO-LiTFSI matrix slows dendrite growth by presenting physical barriers that the dendrites must push or grow around. This tortuous lithium growth mechanism around the LLZO is corroborated with mass spectrometry imaging. Electrochemical impedance spectroscopy (EIS) analysis showed comparable bulk ionic and interfacial resistances with and without nanofibers, indicating that PEO dominates Li + transport and interfacial chemistry. The total Li-ion conductivity of the composite is still governed by the polymer matrix due to high interfacial resistance between the garnet particles and the PEO/LiTFSI matrix. This work highlights important elements to consider in the design of CPEs for high-efficiency lithium metal batteries.

Effect of Confinement on the Structure-Conductivity Relationship in PEO/LiTFSI Electrolytes in 3D Microporous Scaffolds

Anomalous High Ionic Conductivity of Nanoporous Β-Li3ps4

Nanoscale Confinement Effects on Ionic Conductivity of Solid Polymer Electrolytes: The Interplay between Diffusion and Dissociation

On the interfacial lithium dynamics in Li7La3Zr2O12:poly(ethylene oxide) (LiTFSI) composite polymer-ceramic solid electrolytes under strong polymer phase confinement

Unveiling the Structure and Diffusion Kinetics at the Composite Electrolyte Interface in Solid‐State Batteries

Unveiling the Side-Chain Effect on Ionic Conductivity of Poly(ethylene oxide)-Based Polymer-Brush Electrolytes

Engineering Ion Conduction Nanodomain Spacing and Interface Environment for Ultrastable All‐Solid‐State Lithium Metal Batteries

Hydrogen Bonding Induced Confinement Effect between Ultrafine Nanowires and Polymer Chains for Low-Energy-Barrier Ion Transport in Composite Electrolytes

A Universal Room-Temperature 3D Printing Approach Towards porous MOF Based Dendrites Inhibition Hybrid Solid-State Electrolytes

Chain dimensions of poly(ethylene carbonate/ethylene oxide) copolymer with salt addition studied by SANS

Solid polymer electrolytes under nanoscale confinement: a molecular dynamics simulation

Influence of the Polymer Structure and its Crystallization on the Interface Resistance in Polymer-LATP and Polymer-LLZO Hybrid Electrolytes

Structure and Dynamics of Ions in a Poly (ethylene oxide) Matrix Near a Graphite Surface

Facilitating ionic conductivity and interfacial stability via oxygen vacancies-enriched TiO2 microrods for composite polymer electrolytes

Engineering 3D Interpenetrated ZIF-8 Network in Poly(ethylene oxide) Composite Electrolyte for Fast Lithium-Ion Conduction and Effective Lithium-Dendrite Inhibition

Decoupling of Ion-Transport From Polymer Segmental Relaxation and Higher Ionic-Conductivity in Poly(ethylene oxide)/Succinonitrile Composite Based Electrolytes Having Low Lithium Salt Doping

Effects of the Shapes of BaTiO3 Nanofillers on PEO-based Electrolytes for All-Solid-state Lithium-Ion Batteries

Unveiling the Effect Law of Carbon Dots with Polyfunctional Groups on Interface Structure and Ion Migration in Polymer Electrolytes for Solid Lithium Battery

Solvent-Mediated Synthesis of Amorphous Li 3 PS 4 /Polyethylene Oxide Composite Solid Electrolytes with High Li + Conductivity

Phase behavior of ionic fluid in charged confinement: An associating polymer density functional theory study

(Invited) Advancing Understanding of Composite Polymer Electrolytes with LLZO Nanofibers