Abstract:In this study, a resistive humidity sensor for moisture detection at room temperature is presented. The thin film proposed as a critical sensing element is based on a quaternary hybrid nanocomposite CNHox//SnO2/ZnO/PVP (oxidated carbon nanohorns–tin oxide–zinc oxide–polyvinylpyrrolidone) at the w/w/w/w ratios of 1.5/1/1/1 and 3/1/1/1. The sensing structure consists of a Si/SiO2 dielectric substrate and interdigitated transducers (IDT) electrodes, while the sensing film layer is deposited through the drop-casting method. Morphology and composition of the sensing layers were investigated through scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDX), X-ray diffraction, and Raman spectroscopy. Each quaternary hybrid nanocomposite-based thin film’s relative humidity (RH) sensing capability was analyzed by applying a direct current with known intensity between two electrodes and measuring the voltage difference when varying the RH from 0% to 100% in a humid nitrogen atmosphere. While the sensor with CNHox/SnO2/ZnO/PVP at 1.5/1/1/1 as the sensing layer has the better performance in terms of sensitivity, the structure employing CNHox//SnO2/ ZnO/PVP at 3/1/1/1 (mass ratio) as the sensing layer has a better performance in terms of linearity. The contribution of each component of the quaternary hybrid nanocomposites to the sensing performance is discussed in relation to their physical and chemical properties. Several alternative sensing mechanisms were taken into consideration and discussed. Based on the measured sensing results, we presume that the impact of the p-type semiconductor behavior of CNHox, in conjunction with the swelling of the hydrophilic polymer, is dominant and leads to the overall increasing resistance of the sensing film.

Capacitive humidity sensor based on zirconium phosphate nanoplates film with wide sensing range and high response

A novel SAW humidity sensor based on electrosprayed polymerized electrolyte film

Stable and Fast-Response Capacitive Humidity Sensors Based on a ZnO Nanopowder/PVP-RGO Multilayer.

Humidity Sensors Using in Situ Synthesized Sodium Polystyrenesulfonate/zno Nanocomposites.

High-Performance Porous MIM-type Capacitive Humidity Sensor Realized Via Inductive Coupled Plasma and Reactive-Ion Etching

Investigations of room temperature nanoporous alumina humidity sensor

Ultrasensitive Humidity Sensors with Synergy between Superhydrophilic Porous Carbon Electrodes and Phosphorus-Doped Dielectric Electrolyte

Light Humidity Sensor of Surface Plasmon Resonance by Symmetric Metal Film

Integrated Capacitive- and Resistive-Type Bimodal Relative Humidity Sensor Based on 5,10,15,20-Tetraphenylporphyrinatonickel(II) (TPPNi) and Zinc Oxide (ZnO) Nanocomposite

A RESISTIVE-TYPE NANOSTRUCTURED HUMIDITY SENSOR PREPARED BY ELECTROSPINNING

Highly Sensitive Humidity Sensors Based on Pt Functionalized ZIF-67 Towards Noncontact Healthcare Monitoring

Quaternary Holey Carbon Nanohorns/SnO2/ZnO/PVP Nano-Hybrid as Sensing Element for Resistive-Type Humidity Sensor

Humidity Sensors Based on MCM-41/polypyrrole Hybrid Film Via In-Situ Polymerization

A Micro Capacitive Humidity Sensor Based on Al-Mo Electrodes and Polyimide Film

Flexible capacitive humidity sensor based on potassium ion-doped PVA/CAB double-layer sensing film

A Cellulose Nanofiber Capacitive Humidity Sensor with High Sensitivity and Fast Recovery Characteristics

Capacitive Humidity Sensors Based on Mesoporous Silica and Poly(3,4-Ethylenedioxythiophene) Composites.

High-performance ZnO humidity sensor synthesized by coprecipitation with PVP as surfactant for human respiration detection

Target Properties Optimization on Capacitive-Type Humidity Sensor: Ingredients Hybrid and Integrated Passive Devices Fabrication

Highly sensitive humidity sensors based on Sb-doped ZnSnO3 nanoparticles with very small sizes

Pyramid-like zinc oxide microstructures as humidity sensor