Abstract:Organic electronics have attracted intensive research interest in the past decades (Chen et al., 2020; Yao et al., 2020; Tang et al., 2021). The ever-increasing demand for organic electronics calls for the development of high-performance and high-stability organic thin-film transistors (OFETs). OFETs are considered key components to fabricate flexible and printable devices for promising applications, such as flexible displays, chemical sensors, wearable devices, and radio frequency identification (RFID) tags. The design and synthesis of novel structural materials (such as semiconductors, dielectrics, electrodes, and substrates), as well as the development of efficient interface engineering strategies, would further promote the development of flexible electronics and lay the foundation for their early commercialization (Ji et al., 2019; Ji et al., 2021). Despite remarkable progress in the development of new materials and relevant applications in organic electronics, some challenges remain, not only on the design and synthesis of novel structural materials (such as π-conjugated small molecule or polymer semiconductors, dielectrics, electrodes, and substrates), but also the development of efficient interface engineering strategies, for the fabrication of high-performance and high-stability devices, and eventually the realization of commercially available products. For example: 1) The need for new π-conjugated semiconductors (small molecule or polymer semiconductors) compatible with polymer dielectric for high-performance devices; 2) The need for polymer dielectric (chemical structures, polarity effects, etc) compatible with commonly used microfabrication technologies for highly integrated miniaturized devices (such as inverter, oscillator, etc); 3) The need for low-voltage and high-currentdensity high-performance devices (new transistor design or high dielectric constant insulators); 4) The strategies for large-scale device fabrication with uniform performance (new fabrication methods); 5) The need for high-stability devices (atmospheric, thermal). This Research Topic aims to address the above-mentioned challenges, including one Editorial, one Review and five Original research. The following themes will provide some clues to promote progress in this area. First of all, a novel photoactive semiconductor (named as IDTOT-4F) with an A-π-D-π-A-type configuration is synthesized for optoelectrical device with photo response and optical memory behaviors provided by W. Huang et al. Then, the development of new efficient interface engineering strategies (electrode approach by W. Li et al.; interface modification by T. Li et al.) for high-performance organic thin-film transistors. In addition, new methods for the construction of high-performance and high-stability organic thin-film transistors and relevant optoelectronic applications, which could be listed in the review article by L. Huang et al. and original research in the paper of W. Wang et al. Finally, X. Ren and co-workers reported a low-temperature solution process to fabricate a high-k metal oxide dielectric for low-power OFET applications. Edited and reviewed by: Liming Dai, Case Western Reserve University, United States

A Methodology of Fabricating Novel Electrodes for Semiconductor Devices: Doping and Van der Waals Integrating Organic Semiconductor Films (Small 27/2023)

Editorial: High-Performance Organic Thin-Film Transistors

Interface Engineering of Semiconductor/Dielectric Heterojunctions Toward Functional Organic Thin-Film Transistors

Wafer-scale Photolithographic Fabrication of Organic Synaptic Transistor Arrays

Improving Charge Injection for Organic Field‐Effect Transistor Array via Chemical Functionalized Van der Waals Top‐Contacts

High-Yield, Scaling-Up Fabrication of Fermi-Level-Pinning-Free Organic Thin-Film Transistor Arrays with Printed Van der Waals Contacts

Charge Transport: Precise Control of Interfacial Charge Transport for Building Functional Optoelectronic Devices (adv. Mater. Technol. 5/2019)

In Situ Fabrication of Organic Electrochemical Transistors on a Microfluidic Chip

Overview of electrohydrodynamic deposition for fabricating organic thin film transistors

Solution-Processed, Large-Area, Two-Dimensional Crystals of Organic Semiconductors for Field-Effect Transistors and Phototransistors

Asymmetric Chemical Functionalization of Top‐Contact Electrodes: Tuning the Charge Injection for High‐Performance MoS 2 Field‐Effect Transistors and Schottky Diodes

High-Performance Low-Cost Organic Field-Effect Transistors With Chemically Modified Bottom Electrodes

Electric‐Field‐Controlled Dopant Distribution in Organic Semiconductors

A Universal Method to Produce Low–Work Function Electrodes for Organic Electronics

Diketopyrrolopyrrole Based Organic Semiconductor Materials for Field-Effect Transistors

Electrode Doping and Dielectric Effect in Hole Injection into Organic Semiconductors through High Work-Function Oxides

Achieving Unipolar Organic Transistors for Complementary Circuits by Selective Usage of Doped Organic Semiconductor Film Electrodes

Novel Organic Superbase Dopants for Ultraefficient n‐Doping of Organic Semiconductors

Fabrication and Characterization of Molecular Scale Field-Effect Transistors

Improving Electron Injection of Organic Light-Emitting Transistors via Interface Layer Design

Low‐Cost Nucleophilic Organic Bases as n‐Dopants for Organic Field‐Effect Transistors and Thermoelectric Devices