[Pancreatic stone dissolution with dimethadione (DMO). II. Roentgenological follow-up study in canine experimental pancreatic stones].

A. Noda,T. Shibata,T. Hayakawa,T. Kondo,K. Nagai,H. Hamano

1984-02-01

Abstract:

What problem does this paper attempt to address?

A Joint Method of Coherence Factor and Nonlinear Beamforming for Synthetic Aperture Imaging with a Ring Array

Zhengfeng Lan,Chao Rong,Changshan Han,Xiaolei Qu,Jingsong Li,Hongxiang Lin

DOI: https://doi.org/10.1109/embc40787.2023.10340380

2023-01-01

Abstract:Ultrasound computed tomography (USCT) with a ring array is an emerging diagnostic method for breast cancer. In the literature, synthetic aperture (SA) imaging has employed the delay-and-sum (DAS) beamforming technique for ring-array USCT to obtain isotropic resolution reflection images. However, the images obtained by the conventional DAS beamformer suffer from off-axis clutter and low resolution due to inhomogeneity of the medium and phase distortion. To address these issues, researchers have developed adaptive beamforming methods, such as coherence factor (CF) and convolutional beamforming algorithm (COBA), that improve image quality. In this study, we propose a joint method that combines CF with short-lag COBA (SLCOBA). First, we estimate the average sound speed using CF to address tissue inhomogeneity. Based on the corrected sound speed map, SLCOBA effectively suppresses side lobes and enhances image quality. Numerical results show that the proposed method reduces clutter and noise, improving resolution performance. These findings suggest that the proposed method may be a practical option for breast imaging in inhomogeneous mediums in the future.
Enhanced Linear-array Photoacoustic Beamforming using Modified Coherence Factor

Moein Mozaffarzadeh,Yan Yan,Mohammad Mehrmohammadi,Bahador Makkiabadi

DOI: https://doi.org/10.1117/1.JBO.23.2.026005

2018-01-29

Abstract:Photoacoustic imaging (PAI) is a promising medical imaging modality providing the spatial resolution of ultrasound (US) imaging and the contrast of pure optical imaging. For linear-array PAI, a beamformer has to be used as the reconstruction algorithm. Delay-and-sum (DAS) is the most prevalent beamforming algorithm in PAI. However, using DAS beamformer leads to low resolution images along with significant effects of the off-axis signals. Coherence factor (CF) is a weighting method in which each pixel of the reconstructed image is weighted, based on the spatial spectrum of the aperture, to improve the contrast. In this paper, it has been shown that the numerator of the formula of CF contains a DAS algebra, and it was proposed to use the delay-multiply-and-sum (DMAS) beamformer instead of the available DAS on the numerator. The proposed weighting technique, modified CF (MCF), has been evaluated numerically and experimentally compared to CF, and it was shown that MCF leads to lower sidelobes and better detectable targets. The quantitative results of the experiment (using wire targets) show that MCF leads to for about 45% and 40% improvement, in comparison with CF, in the terms of signal-to-noise ratio and full-width-half-maximum, respectively.

Medical Physics,Information Theory,Signal Processing
Coherence-based Phase Aberration Correction and Beamforming for Ring-Array Ultrasound Imaging

Zhengfeng Lan,Chao Rong,Changshan Han,Xiaolei Qu,Jingsong Li,Hongxiang Lin

DOI: https://doi.org/10.1016/j.ymssp.2024.111651

IF: 8.4

2024-01-01

Mechanical Systems and Signal Processing

Abstract:Degradation of image quality caused by aberrations and off-axis interferences is common in medical ultrasound imaging. The ring-array echo imaging also suffers from these constraints, where phase aberrations caused by tissue heterogeneity create overlapping of interest target and worsen the interpretability of anatomical structures; while off-axis interferences reduce the spatial resolution and contrast of the reconstructed images. To address them, the signal coherence is available since they can be considered as incoherent interference and noise. The coherence factor (CF) is sensitive to phase aberrations and is thus adopted in this study. Moreover, the convolutional beamforming algorithm (COBA) specifically exploits the autocorrelation operation to improve the signal coherence and effectively reduce noise. Therefore, we first utilize the CF to detect the local coherence and its maximization criterion as a way to estimate the sound speed to correct for phase aberration. Then, CF is used as an adaptive weighting factor to suppress the noise, and based on this, we develop a short-lag COBA to further enhance the image quality, referred to as the CF_SLCOBA method. Simulations and experiments were performed to evaluate the performance of the proposed methods. Results show that, the improvements of the CF_SLCOBA method in resolution is about 26.8% compared with CF; while about 92.0% in contrast ratio (CR) compared with COBA, in the experiments. Meanwhile, the proposed method yields a good performance in phase aberration correction. This demonstrates that the proposed method may provide benefits for rebuilding high-quality images, which also reveals that it offers a certain potential for practical applications.
Image Enhancement and Noise Reduction Using Modified Delay-Multiply-and-Sum Beamformer: Application to Medical Photoacoustic Imaging

Moein Mozaffarzadeh,Ali Mahloojifar,Mahdi Orooji

DOI: https://doi.org/10.1109/IranianCEE.2017.7985131

2018-01-18

Abstract:Photoacoustic imaging (PAI) is an emerging biomedical imaging modality capable of providing both high contrast and high resolution of optical and UltraSound (US) imaging. When a short duration laser pulse illuminates the tissue as a target of imaging, tissue induces US waves and detected waves can be used to reconstruct optical absorption distribution. Since receiving part of PA consists of US waves, a large number of beamforming algorithms in US imaging can be applied on PA imaging. Delay-and-Sum (DAS) is the most common beamforming algorithm in US imaging. However, make use of DAS beamformer leads to low resolution images and large scale of off-axis signals contribution. To address these problems a new paradigm namely Delay-Multiply-and-Sum (DMAS), which was used as a reconstruction algorithm in confocal microwave imaging for breast cancer detection, was introduced for US imaging. Consequently, DMAS was used in PA imaging systems and it was shown this algorithm results in resolution enhancement and sidelobe degrading. However, in presence of high level of noise the reconstructed image still suffers from high contribution of noise. In this paper, a modified version of DMAS beamforming algorithm is proposed based on DAS inside DMAS formula expansion. The quantitative and qualitative results show that proposed method results in more noise reduction and resolution enhancement in expense of contrast degrading. For the simulation, two-point target, along with lateral variation in two depths of imaging are employed and it is evaluated under high level of noise in imaging medium. Proposed algorithm in compare to DMAS, results in reduction of lateral valley for about 19 dB followed by more distinguished two-point target. Moreover, levels of sidelobe are reduced for about 25 dB.

Signal Processing,Information Theory
Noise adaptive beamforming for linear array photoacoustic imaging

Souradip Paul,Subhamoy Mandal,Mayanglambam Suheshkumar Singh

DOI: https://doi.org/10.48550/arXiv.2011.08414

2021-07-28

Abstract:Delay-and-sum (DAS) algorithms are widely used for beamforming in linear array photoacoustic imaging systems and are characterized by fast execution. However, these algorithms suffer from various drawbacks like low resolution, low contrast, high sidelobe artifacts and lack of visual coherence. More recently, adaptive weighting was introduced to improve the reconstruction image quality. Unfortunately, the existing state-of-the-art adaptive beamforming algorithms are computationally expensive and do not consider the specific noise characteristics of the acquired ultrasonic signal. In this article, we present a new adaptive weighting factor named the variational coherence factor (VCF), which takes into account the noise level variations of radio-frequency data. The proposed technique provides superior results in terms of image resolution, sidelobe reduction, signal-to-noise and contrast level improvement. The quantitative results of the numerical simulations and phantom imaging show that the proposed VCF assisted DAS method leads to 55% and 25% improvement in FWHM, 57% and 32% improvement in SNR, respectively, compared to the state-of-the-art DAS-based methods. The results demonstrate that the proposed method can effectively improve the reconstructed image quality and deliver satisfactory imaging performance even with a limited number of sensor elements. The proposed method can potentially reduce the instrumentation cost of the photoacoustic imaging system and contribute toward the clinical translation of the modality.

Medical Physics,Image and Video Processing
Image Improvement in Linear-Array Photoacoustic Imaging using High Resolution Coherence Factor Weighting Technique

Moein Mozaffarzadeh,Mohammad Mehrmohammadi,Bahador Makkiabadi

DOI: https://doi.org/10.48550/arXiv.1710.02751

2017-10-08

Abstract:In Photoacoustic imaging (PAI), the most prevalent beamforming algorithm is delay-and-sum (DAS) due to its simple implementation. However, it results in a low quality image affected by the high level of sidelobes. Coherence factor (CF) can be used to address the sidelobes in the reconstructed images by DAS, but the resolution improvement is not good enough compared to the high resolution beamformers such as minimum variance (MV). As a weighting algorithm in linear-array PAI, it was proposed to use high-resolution-CF (HRCF) weighting technique in which MV is used instead of the existing DAS in the formula of the conventional CF. The higher performance of HRCF was proved numerically and experimentally. The quantitative results obtained with the simulations show that at the depth of 40 mm, in comparison with DAS+CF and MV+CF, HRCF improves the full-width-half-maximum of about 91 % and 15 % and the signal-to-noise ratio about 40 % and 14 %, respectively. Moreover, the contrast ratio at the depth of 20 mm has been improved about 62 % and 21 % by HRCF, compared to DAS+CF and MV+CF, respectively

Signal Processing,Medical Physics
Validity of the Two‐Signal Model for Activation of CD28‐Deficient T Lymphocytes: Quantitative Characterization of an Alternative Costimulatory Function of Dendritic Cells

D. Cassell

DOI: https://doi.org/10.1046/j.1365-3083.2001.00909.x

2001-04-01

Scandinavian Journal of Immunology

Abstract:The observation that primary T‐dependent immune responses are generated in mice lacking CD28, the only receptor definitively shown to costimulate naive T cells, has led to ambiguity as to whether costimulation is absolutely required for initiation of T‐cell responses. In this report, in vitro analysis of the relationship between cell density and proliferation demonstrates that activation of CD28‐/‐ T cells to immobilized T‐cell receptor (TCR)‐α monoclonal antibodies (MoAb) depends on costimulatory signals provided by other cells in culture and occurs only at cell densities sufficient to permit these intercellular interactions. These signals are necessary even under TCR triggering conditions that obviate the CD28 requirement. Dendritic cells (DCs) provide the necessary costimulation in vitro and prime T cells in vivo in CD28‐/‐ mice. Single‐cell and limiting dilution analyses indicate that individual T cells from normal and CD28‐/‐ mice produce equivalent interleukin (IL)‐2 in response to DCs. However, half as many T cells produce IL‐2 when only the CD28‐independent pathway is used. Nonetheless, CD28‐/‐ T cells produce sufficient IL‐2 to support clonal expansion comparable to that of CD28+/+ T cells, which may account for the equally robust in vivo responses initiated by DCs in normal and CD28‐deficient animals.
Higher-order correlation based real-time beamforming in photoacoustic imaging

Sufayan Mulani,Souradip Paul,Mayanglambam Suheshkumar Singh

DOI: https://doi.org/10.1364/JOSAA.461323

2022-03-29

Abstract:Linear-array based photoacoustic images are reconstructed using the conventional delay-and-sum (DAS) beamforming method. Although the DAS beamformer is well suited for PA image formation, reconstructed images are often afflicted by noises, sidelobes, and other intense artifacts due to inaccurate assumptions of PA signal correlation. The work aims to develop an inversion method that reduces the occurrence of sidelobes and artifacts and improves image quality performance. We present a novel beamformer based on higher-order signal correlation, where more number of delayed PA signals are combined and summed up than the conventional delay-multiply-and-sum (DMAS). The proposed technique provides efficient improvements in resolution, contrast, and SNR compared to the traditional beamformers. Computational complexity in this method is shrunk to the same order of DAS $O(N)$. Therefore, this beamformer can be implemented in real-time PA image reconstruction. A GPU based study was performed on computation time. Proposed method almost executes in the same time frame of DAS and real-time DMAS. A validation study of the algorithm was accomplished both numerically and experimentally. Higher-order DMAS beamformers demonstrate superior reconstruction in all cases. The quantitative evaluation of the ex-vivo phantom shows that the proposed method leads to 51% and 6% improvement in FWHM, 81% and 39% improvement in SNR compared to DAS and DMAS, respectively. Conclusively, the proposed algorithm is very much potential and promising in real-time photoacoustic imaging and its applications.

Medical Physics
Subaperture Processing-Based Adaptive Beamforming for Photoacoustic Imaging

Rashid Al Mukaddim,Rifat Ahmed,Tomy Varghese

DOI: https://doi.org/10.1109/TUFFC.2021.3060371

Abstract:Delay-and-sum (DAS) beamformers, when applied to photoacoustic (PA) image reconstruction, produce strong sidelobes due to the absence of transmit focusing. Consequently, DAS PA images are often severely degraded by strong off-axis clutter. For preclinical in vivo cardiac PA imaging, the presence of these noise artifacts hampers the detectability and interpretation of PA signals from the myocardial wall, crucial for studying blood-dominated cardiac pathological information and to complement functional information derived from ultrasound imaging. In this article, we present PA subaperture processing (PSAP), an adaptive beamforming method, to mitigate these image degrading effects. In PSAP, a pair of DAS reconstructed images is formed by splitting the received channel data into two complementary nonoverlapping subapertures. Then, a weighting matrix is derived by analyzing the correlation between subaperture beamformed images and multiplied with the full-aperture DAS PA image to reduce sidelobes and incoherent clutter. We validated PSAP using numerical simulation studies using point target, diffuse inclusion and microvasculature imaging, and in vivo feasibility studies on five healthy murine models. Qualitative and quantitative analysis demonstrate improvements in PAI image quality with PSAP compared to DAS and coherence factor weighted DAS (DAS CF ). PSAP demonstrated improved target detectability with a higher generalized contrast-to-noise (gCNR) ratio in vasculature simulations where PSAP produces 19.61% and 19.53% higher gCNRs than DAS and DAS CF , respectively. Furthermore, PSAP provided higher image contrast quantified using contrast ratio (CR) (e.g., PSAP produces 89.26% and 11.90% higher CR than DAS and DAS CF in vasculature simulations) and improved clutter suppression.
Photoacoustic Imaging of Human Vasculature Using LED versus Laser Illumination: A Comparison Study on Tissue Phantoms and In Vivo Humans

Sumit Agrawal,Mithun Kuniyil Ajith Singh,Kerrick Johnstonbaugh,David C. Han,Colette R. Pameijer,Sri-Rajasekhar Kothapalli

DOI: https://doi.org/10.3390/s21020424

IF: 3.9

2021-01-09

Sensors

Abstract:Vascular diseases are becoming an epidemic with an increasing aging population and increases in obesity and type II diabetes. Point-of-care (POC) diagnosis and monitoring of vascular diseases is an unmet medical need. Photoacoustic imaging (PAI) provides label-free multiparametric information of deep vasculature based on strong absorption of light photons by hemoglobin molecules. However, conventional PAI systems use bulky nanosecond lasers which hinders POC applications. Recently, light-emitting diodes (LEDs) have emerged as cost-effective and portable optical sources for the PAI of living subjects. However, state-of-art LED arrays carry significantly lower optical energy (<0.5 mJ/pulse) and high pulse repetition frequencies (PRFs) (4 KHz) compared to the high-power laser sources (100 mJ/pulse) with low PRFs of 10 Hz. Given these tradeoffs between portability, cost, optical energy and frame rate, this work systematically studies the deep tissue PAI performance of LED and laser illuminations to help select a suitable source for a given biomedical application. To draw a fair comparison, we developed a fiberoptic array that delivers laser illumination similar to the LED array and uses the same ultrasound transducer and data acquisition platform for PAI with these two illuminations. Several controlled studies on tissue phantoms demonstrated that portable LED arrays with high frame averaging show higher signal-to-noise ratios (SNRs) of up to 30 mm depth, and the high-energy laser source was found to be more effective for imaging depths greater than 30 mm at similar frame rates. Label-free in vivo imaging of human hand vasculature studies further confirmed that the vascular contrast from LED-PAI is similar to laser-PAI for up to 2 cm depths. Therefore, LED-PAI systems have strong potential to be a mobile health care technology for diagnosing vascular diseases such as peripheral arterial disease and stroke in POC and resource poor settings.

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation
A new technique for hepatic infusional chemotherapy.

T. J. Pagana

DOI: https://doi.org/10.1002/SSU.2980020206

Seminars in Surgical Oncology

Abstract:Constant-infusion intra-arterial chemotherapy is associated with a significantly greater tumor response rate and perhaps an improved survival rate. Many intra-arterial drug delivery systems have been described, the most popular of which is the implanted Infusaid pump. Unfortunately, this is an expensive device that requires considerable experience in its implantation and maintenance. This paper describes a simplified, inexpensive technique, which can comfortably and reliably provide intra-arterial hepatic chemotherapy to patients treated in most moderate-size community hospitals. Implantation requires angiography and a minor surgical procedure. Maintenance of the system is easy and inexpensive. While use of the Infusaid pump is preferable, this technique is a reasonable alternative for the following: 1) patients with very poor hepatic function, 2) patients who cannot afford the implanted pump, 3) patients who have concomitant extrahepatic tumor, 4) patients with noncolorectal metastasis to the liver, and 5) patients treated at hospitals that do not have implanted pump capabilities.
Delay-and-sum-to-delay-standard-deviation factor: a promising adaptive beamformer

Souradip Paul,Anjali Thomas,Mayanglambam Suheshkumar Singh

DOI: https://doi.org/10.1364/OL.437394

2021-09-15

Abstract:A new adaptive weighting method [delay-and-sum-to-delay-standard-deviation factor (DASDSF)] combined with minimum variance (MV) beamforming is introduced in photoacoustic imaging (PAI). Existing MV-based beamformers improve photoacoustic image quality in terms of achieving narrow main lobes and, thus, improving spatial resolution. But, the beamformers give a strong side-lobe signal strength that greatly degrades the reconstructed image contrast. As a feedback weighting factor, DASDSF addresses the persisting side-lobe issue present in MV-beamformed images, i.e., our proposed method is robust against reduction in noises as well as side lobes, and it outperforms MV and MV combined with coherence factor beamformers. Validation studies-being carried out both in numerical simulation and experiments employing a low-cost (16 elements) linear transducer array in a home-built PAI system-demonstrate an excellent performance of the proposed weighting approach in improving SNR, while reducing main-lobe width (i.e., FWHM) and side-lobe signal strength. The study demonstrates that the proposed algorithm holds promise for development of a cost-effective PAI system using a low-cost linear transducer (∼16 elements against ∼128 generally used).
Low complexity adaptive ultrasound image beamformer combined with improved multiphase apodization with cross-correlation

Ping Wang,Yue Shen,Qianwen Li,Lin Tong,Xitao Li,Jinghan Cuhen

DOI: https://doi.org/10.1016/j.ultras.2023.107084

IF: 4.2

2023-06-17

Ultrasonics

Abstract:In this paper, an ultrasound imaging method combined with low-complexity adaptive beamformer (LCA) and improved multiphase apodization with cross-correlation (IMPAX) is proposed to improve image resolution and contrast with low hardware cost. Firstly, the delayed echo signal is apodized by the LCA to obtain a narrow mainlobe width echo signal and LCA output. Then, multiple pairs of complementary square-wave phase apodizations are applied to the apodized echo signal to obtain corresponding signal pairs, which are used to calculate the normalized cross-correlation (NCC) matrix. Finally, the average value of the NCC matrices is filtered by 2-D means, and the filtered result is introduced as the weighting factor for the LCA output. The simulation and experimental results show that the proposed LCA-IMPAX can effectively reduce the mainlobe width, suppress clutter, and be robust to noise. Compared with DAS, LCA, and MPAX, for simulated point targets, the full-width at half-maximum (FWHM, -6dB) of LCA-IMPAX is reduced by 49.22%, 10.06%, and 48.67%, respectively. For simulated cyst, the CR is improved by 219.91%, 138.08%, and 103.44%, respectively. For experimental cysts, the CR is improved by an average of 145.00%, 136.14%, and 55.09%, respectively. The results of human heart data indicate that LCA-IMPAX has good imaging quality in vivo. Since the proposed method does not involve covariance matrix inversion, it can be applied in real-time imaging systems.

acoustics,radiology, nuclear medicine & medical imaging
An Efficient Nonlinear Beamformer Based on P^{th} Root of Detected Signals for Linear-Array Photoacoustic Tomography: Application to Sentinel Lymph Node Imaging

Moein Mozaffarzadeh,Vijitha Periyasamy,Manojit Pramanik,Bahador Makkiabadi

DOI: https://doi.org/10.1117/1.JBO.23.12.121604

2018-05-25

Abstract:In linear-array transducer based photoacoustic (PA) imaging, B-scan PA images are formed using the raw channel PA signals. Delay-and-Sum (DAS) is the most prevalent algorithm due to its simple implementation, but it leads to low quality images. Delay-Multiply-and-Sum (DMAS) provides a higher image quality in comparison with DAS while it imposes a computational burden of O(M^2). In this work, we introduce a nonlinear (NL) beamformer for linear-array PA imaging, which uses the p^{th} root of the detected signals and imposes the complexity of DAS (O(M)). The proposed algorithm is evaluated numerically and experimentally (wire-target and in vivo sentinel lymph node (SLN) imaging), and the effects of the parameter p are investigated. The results show that the NL algorithm, using a root of p (NL_p), leads to lower sidelobes and higher signal-to-noise ratio (SNR) compared to DAS and DMAS, for (p > 2). The sidelobes level (for the wire-target phantom), at the depth of 11.4 mm, are about -31 dB, -52 dB, -52 dB, -67 dB, -88 dB and -109 dB, for DAS, DMAS, NL_2, NL_3, NL_4 and NL_5, respectively, indicating the superiority of the NL_p algorithm. In addition, the best value of p for SLN imaging is reported to be 12.

Signal Processing,Instrumentation and Detectors,Medical Physics
Photoacoustic Spectral Response using Ultrasound and Interferometric Sensors: A Correlation Study for a High Bandwidth Real-Time Blood Vasculature Monitoring Application in a Chick-Embryo Chorioallantoic Membrane (CAM) Model

Suhel Khan,Debasis Nayak,Srivathsan Vasudevan

DOI: https://doi.org/10.1177/00037028231194088

2023-08-21

Applied Spectroscopy

Abstract:Photoacoustic (PA) spectral response technique has shown good promise in efficient preclinical tissue diagnosis by depicting mechano-biological properties due to high spatial resolution and penetration depth. The conventional PA-based system is a pump–probe technique that utilizes neodymium-doped yttrium aluminum garnet pulsed laser as a pump and an ultrasound sensor as a probe. For biomedical studies, high-speed PA signals need to be acquired, requiring higher bandwidth ultrasound sensors. While the bandwidth increases, they exhibit a very low signal-to-noise ratio that inhibits acquiring PA signals of biomedical samples. An interferometer-based probe has recently been investigated as a potential ultrasound probe for obtaining PA signals as an alternative. This optical PA detection technique offers high sensitivity by combining low acoustic impedance with high electromechanical coupling. However, there is a lack of exploration of the same for real-time biomedical studies. This work shows the development of a homodyne Mach-Zehnder interferometer-based PA spectral response (PASR) followed by a correlation study between the conventional ultrasound sensor and the interferometer-based sensor. Further, this study demonstrates the capability of continuous monitoring of vascular growth and the effect of an antidrug (Cisplatin) on the vasculature tested on a chick-embryo chorioallantoic membrane model. PASR was able to monitor growth changes within one day, which was not possible with conventional methods. This opens up potential possibilities for using this technique in biomedical applications.

spectroscopy,instruments & instrumentation
Double-Stage Delay Multiply and Sum Beamforming Algorithm: Application to Linear-Array Photoacoustic Imaging

Moein Mozaffarzadeh,Ali Mahloojifar,Mahdi Orooji,Saba Adabi,Mohammadreza Nasiriavanaki

DOI: https://doi.org/10.48550/arXiv.1801.07446

IF: 4.729

2018-01-23

Signal Processing

Abstract:Photoacoustic imaging (PAI) is an emerging medical imaging modality capable of providing high spatial resolution of Ultrasound (US) imaging and high contrast of optical imaging. Delay-and-Sum (DAS) is the most common beamforming algorithm in PAI. However, using DAS beamformer leads to low resolution images and considerable contribution of off-axis signals. A new paradigm namely Delay-Multiply-and-Sum (DMAS), which was originally used as a reconstruction algorithm in confocal microwave imaging, was introduced to overcome the challenges in DAS. DMAS was used in PAI systems and it was shown that this algorithm results in resolution improvement and sidelobe degrading. However, DMAS is still sensitive to high levels of noise, and resolution improvement is not satisfying. Here, we propose a novel algorithm based on DAS algebra inside DMAS formula expansion, Double Stage DMAS (DS-DMAS), which improves the image resolution and levels of sidelobe, and is much less sensitive to high level of noise compared to DMAS. The performance of DS-DMAS algorithm is evaluated numerically and experimentally. The resulted images are evaluated qualitatively and quantitatively using established quality metrics including signal-to-noise ratio (SNR), full-width-half-maximum (FWHM) and contrast ratio (CR). It is shown that DS-DMAS outperforms DAS and DMAS at the expense of higher computational load. DS-DMAS reduces the lateral valley for about 15 dB and improves the SNR and FWHM better than 13% and 30%, respectively. Moreover, the levels of sidelobe are reduced for about 10 dB in comparison with those in DMAS.
Linear-Array Photoacoustic Imaging Using Minimum Variance-Based Delay Multiply and Sum Adaptive Beamforming Algorithm

Moein Mozaffarzadeh,Ali Mahloojifar,Mahdi Orooji,Karl Kratkiewicz,Saba Adabi,Mohammadreza Nasiriavanaki

DOI: https://doi.org/10.1117/1.JBO.23.2.026002

2018-01-29

Abstract:In Photoacoustic imaging (PA), Delay-and-Sum (DAS) beamformer is a common beamforming algorithm having a simple implementation. However, it results in a poor resolution and high sidelobes. To address these challenges, a new algorithm namely Delay-Multiply-and-Sum (DMAS) was introduced having lower sidelobes compared to DAS. To improve the resolution of DMAS, a novel beamformer is introduced using Minimum Variance (MV) adaptive beamforming combined with DMAS, so-called Minimum Variance-Based DMAS (MVB-DMAS). It is shown that expanding the DMAS equation results in multiple terms representing a DAS algebra. It is proposed to use the MV adaptive beamformer instead of the existing DAS. MVB-DMAS is evaluated numerically and experimentally. In particular, at the depth of 45 mm MVB-DMAS results in about 31 dB, 18 dB and 8 dB sidelobes reduction compared to DAS, MV and DMAS, respectively. The quantitative results of the simulations show that MVB-DMAS leads to improvement in full-width-half-maximum about 96 %, 94 % and 45 % and signal-to-noise ratio about 89 %, 15 % and 35 % compared to DAS, DMAS, MV, respectively. In particular, at the depth of 33 mm of the experimental images, MVB-DMAS results in about 20 dB sidelobes reduction in comparison with other beamformers.

Signal Processing,Information Theory
Learning-based sound speed estimation and aberration correction in linear-array photoacoustic imaging

Mengjie Shi,Tom Vercauteren,Wenfeng Xia

DOI: https://doi.org/10.1016/j.pacs.2024.100621

2024-03-06

Abstract:Photoacoustic (PA) image reconstruction involves acoustic inversion that necessitates the specification of the speed of sound (SoS) within the medium of propagation. Due to the lack of information on the spatial distribution of the SoS within heterogeneous soft tissue, a homogeneous SoS distribution (such as 1540 m/s) is typically assumed in PA image reconstruction, similar to that of ultrasound (US) imaging. Failure to compensate the SoS variations leads to aberration artefacts, deteriorating the image quality. Various methods have been proposed to address this issue, but they usually involve complex hardware and/or time-consuming algorithms, hindering clinical translation. In this work, we introduce a deep learning framework for SoS estimation and subsequent aberration correction in a dual-modal PA/US imaging system exploiting a clinical US probe. As the acquired PA and US images were inherently co-registered, the estimated SoS distribution from US channel data using a deep neural network was incorporated for accurate PA image reconstruction. The framework comprised an initial pre-training stage based on digital phantoms, which was further enhanced through transfer learning using physical phantom data and associated SoS maps obtained from measurements. This framework achieved a root mean square error of 10.2 m/s and 15.2 m/s for SoS estimation on digital and physical phantoms, respectively and structural similarity index measures of up to 0.86 for PA reconstructions as compared to the conventional approach of 0.69. A maximum of 1.2 times improvement in signal-to-noise ratio of PA images was further demonstrated with a human volunteer study. Our results show that the proposed framework could be valuable in various clinical and preclinical applications to enhance PA image reconstruction.

Image and Video Processing,Computer Vision and Pattern Recognition
Towards Clinical Translation of LED-Based Photoacoustic Imaging: A Review

Yunhao Zhu,Ting Feng,Qian Cheng,Xueding Wang,Sidan Du,Naoto Sato,Mithun Kuniyil Ajith Singh,Jie Yuan

DOI: https://doi.org/10.3390/s20092484

2020-01-01

Abstract:Photoacoustic imaging, with the capability to provide simultaneous structural, functional, and molecular information, is one of the fastest growing biomedical imaging modalities of recent times. As a hybrid modality, it not only provides greater penetration depth than the purely optical imaging techniques, but also provides optical contrast of molecular components in the living tissue. Conventionally, photoacoustic imaging systems utilize bulky and expensive class IV lasers, which is one of the key factors hindering the clinical translation of this promising modality. Use of LEDs which are portable and affordable offers a unique opportunity to accelerate the clinical translation of photoacoustics. In this paper, we first review the development history of LED as an illumination source in biomedical photoacoustic imaging. Key developments in this area, from point-source measurements to development of high-power LED arrays, are briefly discussed. Finally, we thoroughly review multiple phantom, ex-vivo, animal in-vivo, human in-vivo, and clinical pilot studies and demonstrate the unprecedented preclinical and clinical potential of LED-based photoacoustic imaging.
A Wide Field of Vision Photoacoustic Imaging Method Based on Axial-Lateral Multi-Angle Laser Excitation and Coherent Compounding Technique: A Simulation and Experiment Study

Boyi Li,Shuai Han,Qiang Xie,Chunshan Yang,Tianhua Zhou,Ying Li,Ting Feng,Dan Li,Kailiang Xu,Xin Liu,Dean Ta

DOI: https://doi.org/10.1109/laus60931.2024.10553078

2024-01-01

Abstract:Background: Improving the field of vision (FOV) in photoacoustic images (PA) will provide effective information for the diagnosis of diseases. However, the wide FOV is usually limited by the laser spot size and energy. The laser beam diffusion method could expand spot size to increase the irradiation area, but it may cause a significant decrease in the overall PA signal amplitude. It is possible to increase the laser energy to enhance the PA amplitude, but it needs to be limited under the safety threshold. Objective: The objective of this study is to improve the PA imaging method to increase the FOV. Statement of Contribution/Methods: In this study, we present a PA image method named the Axial-Lateral Multi-Angle Laser Excitation and Coherent Compounding (MAC-PA) for increasing the FOV in PA imaging. The effectiveness of the method is verified both by the experiments and the simulation systems. Specifically, we designed a PA imaging system with a 64-element transducer combined Axial-Lateral direction multi-angle laser illumination technique and based on all angles' results and the coherent compounding algorithm to obtain a wide-FOV image. Results/Discussion: Both the experiment and simulation results in the figures show that the proposed laser excitation with the coherent compounding method can significantly expand the FOV and improve the signal-to-noise ratio in the PA image with no additional laser energy required. Conclusion: The MAC-PA method proposed in this study provides a new gate to significantly enhance FOV in the PA image without additional laser energy increase.

[Pancreatic stone dissolution with dimethadione (DMO). II. Roentgenological follow-up study in canine experimental pancreatic stones].

A Joint Method of Coherence Factor and Nonlinear Beamforming for Synthetic Aperture Imaging with a Ring Array

Enhanced Linear-array Photoacoustic Beamforming using Modified Coherence Factor

Coherence-based Phase Aberration Correction and Beamforming for Ring-Array Ultrasound Imaging

Image Enhancement and Noise Reduction Using Modified Delay-Multiply-and-Sum Beamformer: Application to Medical Photoacoustic Imaging

Noise adaptive beamforming for linear array photoacoustic imaging

Image Improvement in Linear-Array Photoacoustic Imaging using High Resolution Coherence Factor Weighting Technique

Validity of the Two‐Signal Model for Activation of CD28‐Deficient T Lymphocytes: Quantitative Characterization of an Alternative Costimulatory Function of Dendritic Cells

Higher-order correlation based real-time beamforming in photoacoustic imaging

Subaperture Processing-Based Adaptive Beamforming for Photoacoustic Imaging

Photoacoustic Imaging of Human Vasculature Using LED versus Laser Illumination: A Comparison Study on Tissue Phantoms and In Vivo Humans

A new technique for hepatic infusional chemotherapy.

Delay-and-sum-to-delay-standard-deviation factor: a promising adaptive beamformer

Low complexity adaptive ultrasound image beamformer combined with improved multiphase apodization with cross-correlation

An Efficient Nonlinear Beamformer Based on P^{th} Root of Detected Signals for Linear-Array Photoacoustic Tomography: Application to Sentinel Lymph Node Imaging

Photoacoustic Spectral Response using Ultrasound and Interferometric Sensors: A Correlation Study for a High Bandwidth Real-Time Blood Vasculature Monitoring Application in a Chick-Embryo Chorioallantoic Membrane (CAM) Model

Double-Stage Delay Multiply and Sum Beamforming Algorithm: Application to Linear-Array Photoacoustic Imaging

Linear-Array Photoacoustic Imaging Using Minimum Variance-Based Delay Multiply and Sum Adaptive Beamforming Algorithm

Learning-based sound speed estimation and aberration correction in linear-array photoacoustic imaging

Towards Clinical Translation of LED-Based Photoacoustic Imaging: A Review

A Wide Field of Vision Photoacoustic Imaging Method Based on Axial-Lateral Multi-Angle Laser Excitation and Coherent Compounding Technique: A Simulation and Experiment Study