Abstract:Background: Owing to its portability, affordability, and energy-efficiency, LED-based photoacoustic (PA) imaging is increasingly becoming popular when compared to its laser-based alternative, mainly for superficial vascular imaging applications. However, this technique suffers from low SNR and thereby limited imaging depth. As a result, visual image quality of LED-based PA imaging is not optimal, especially in sub-surface vascular imaging applications. Purpose: Combination of linear ultrasound (US) probes and LED arrays are the most common implementation in LED-based PA imaging, which is currently being explored for different clinical imaging applications. Traditional delay-and-sum (DAS) is the most common beamforming algorithm in linear array-based PA detection. Side-lobes and reconstruction-related artifacts make the DAS performance unsatisfactory and poor for a clinical-implementation. In this work, we explored a new weighting-based image processing technique for LED-based PAs to yield improved image quality when compared to the traditional methods. Methods: We are proposing a lag-coherence factor (LCF), which is fundamentally based on the combination of the spatial auto-correlation of the detected PA signals. In LCF, the numerator contains lag-delay-multiply-and-sum (DMAS) beamformer instead of a conventional DAS beamformer. A spatial auto-correlation operation is performed between the detected US array signals before using DMAS beamformer. We evaluated the new method on both tissue-mimicking phantom (2D) and human volunteer imaging (3D) data acquired using a commercial LED-based PA imaging system. Results: Our novel correlation-based weighting technique showed LED-based PA image quality improvement when it is combined with conventional DAS beamformer. Both phantom and human volunteer imaging results gave a direct confirmation that by introducing LCF, image quality was improved and this method could reduce side-lobes and artifacts when compared to the DAS and coherence-factor (CF) approaches. Signal-to-noise ratio, generalized contrast-to-noise ratio, contrast ratio and spatial resolution were evaluated and compared with conventional beamformers to assess the reconstruction performance in a quantitative way. Results show that our approach offered image quality enhancement with an average signal-to-noise ratio and spatial resolution improvement of around 20% and 25% respectively, when compared with conventional CF based DAS algorithm. Conclusions: Our results demonstrate that the proposed LCF based algorithm performs better than the conventional DAS and CF algorithms by improving signal-to-noise ratio and spatial resolution. Therefore, our new weighting technique could be a promising tool to improve the performance of LED-based PA imaging and thus accelerate its clinical translation.

Image Improvement in Linear-Array Photoacoustic Imaging using High Resolution Coherence Factor Weighting Technique

Enhanced Linear-array Photoacoustic Beamforming using Modified Coherence Factor

A Joint Method of Coherence Factor and Nonlinear Beamforming for Synthetic Aperture Imaging with a Ring Array

Double Minimum Variance Beamforming Method to Enhance Photoacoustic Imaging

Double-Stage Delay Multiply and Sum Beamforming Algorithm: Application to Linear-Array Photoacoustic Imaging

Linear-Array Photoacoustic Imaging Using Minimum Variance-Based Delay Multiply and Sum Adaptive Beamforming Algorithm

Noise adaptive beamforming for linear array photoacoustic imaging

Coherence-based Phase Aberration Correction and Beamforming for Ring-Array Ultrasound Imaging

Higher-order correlation based real-time beamforming in photoacoustic imaging

Image Enhancement and Noise Reduction Using Modified Delay-Multiply-and-Sum Beamformer: Application to Medical Photoacoustic Imaging

Delay-and-sum-to-delay-standard-deviation factor: a promising adaptive beamformer

Improving Minimum Variance Beamforming with Sub-Aperture Processing for Photoacoustic Imaging

Three-Dimensional Photoacoustic Tomography using Delay Multiply and Sum Beamforming Algorithm

Eigenspace-Based Minimum Variance Combined With Delay Multiply and Sum Beamformer: Application to Linear-Array Photoacoustic Imaging

Improvement of LED-based photoacoustic imaging using lag-coherence factor (LCF) beamforming

Photoacoustic Image Formation Based on Sparse Regularization of Minimum Variance Beamformer

Improved Subarray Coherence Factor Beamformer for Ultrasound Plane-Wave Imaging

Subaperture Processing-Based Adaptive Beamforming for Photoacoustic Imaging

Image enhancement in acoustic-resolution photoacoustic microscopy enabled by a novel directional algorithm

Improving photoacoustic imaging in low signal-to-noise ratio by using spatial and polarity coherence