Abstract:Purpose: To evaluate the color stability of 3D-printed interim restorations with different surface treatments while immersed in various staining solutions or beverages (artificial saliva, tea, coffee, and wine) for 6 months. Material and methods: An acrylic tooth was prepared for an all-ceramic full-coverage restoration. A laboratory scanner was used to digitize the prepared abutment tooth. A virtual all-ceramic full-coverage restoration was designed on the digitized abutment tooth using a laboratory CAD/CAM software. Eighty abutment teeth and interim restorations were 3D-printed with tooth-colored photopolymerizing resin. The restorations were randomly allocated into two different groups: Polish and Optiglaze. For the Polish group, interim restorations were finished and polished with aluminum oxide finishers/polishers. For the Optiglaze group, one layer of nanofilled, light-polymerizing protective coating was then applied. The 80 printed interim crowns were divided into 4 different groups depending on where they would be immersed: Artificial saliva, coffee, wine, and tea. After the sample allocations, there were 8 experimental groups. Each group was allocated with 10 specimens. Color measurements were obtained using a digital spectrophotometer in conjunction with The CIE L*a*b* system before the immersion and 6 months after the immersion. Two-way analysis of variance (ANOVA) was used to test the effects of surface treatment, immersion liquid, and their interaction on ΔE at 6-month post-immersion. Fisher's protected least significant differences (LSD) was used as post hoc test to compare groups differences (α = .05). Results: There were significant effects of surface treatment [F(1,72) = 13.39, p = 0.000], immersion liquid [F(3,72) = 74.18, p = 0.000], and their interaction [F(3,72) = 16.33, p = 0.000] on ΔE at 6-month post-immersion at the α = .05 level. The polish group showed significantly higher ΔE than the Optiglaze group when immersed in coffee (p < 0.001) and wine (p = 0.015). The Optiglaze group showed significantly higher ΔE than the polish group that was immersed in artificial saliva (p < 0.001). The wine group showed higher ΔE than all other immersion liquid groups for both polish and Optiglaze surface treatments (p < 0.001 for all comparisons). ΔL* showed a reduction that was significantly higher than the 2.0 acceptability threshold in the wine-polish (p < 0.001) and wine-Optiglaze (p < 0.001) groups. ΔE showed a color change that was significantly higher than the perceptibility and acceptability thresholds for all the groups under polish surface treatment (p < 0.001). ΔE also showed a color change that was significantly higher than the perceptibility and acceptability thresholds for artificial saliva, tea, and wine under Optiglaze surface treatment (p = 0.004). Conclusions: 3D-printed interim restorations showed significant discoloration after 6-months immersions in the artificial saliva and common beverages (including tea, coffee, and wine). Among all the chromogenic beverages, red wine caused the most significant discoloration on the interim restorations. When 3D-printed interim restorations are needed for extended intraoral service, nano-filled, light polymerizing protective coating can reduce the restoration discoloration caused by chromogenic beverages. The protective effect is most significant against coffee.

Effect of mouth rinses on the stainability of monolithic lithium disilicate glass-ceramics with different surface treatments: An in vitro study

Influence of Restoration Thickness and Resin Cement on Translucency and Color of Different Types of Monolithic Zirconia and Lithium Disilicate Ceramic

Impact of common social habits on optical properties of lithium disilicate glass ceramic crowns: An in vitro study

Staining and bleaching susceptibility of zirconia-reinforced lithium silicate glass-ceramics with different thicknesses, translucencies, and fabrication methods

INFLUENCE OF AGING, BEVERAGES, AND MOUTH WASH SOLUTIONS ON THE MICROSTRUCTURAL AND COLOR STABILITY OF DIFFERENT DENTAL CERAMICS: AN IN VITRO STUDY

Effect of different surface treatments on optical, colorimetric, and surface characteristics of a lithium disilicate glass-ceramic

Effect of surface roughness and biofilm formation on the color properties of resin-infiltrated ceramic and lithium disilicate glass-ceramic CAD-CAM materials

Effect of toothbrushing with conventional and whitening dentifrices on monolithic zirconia after finishing procedures

Effect of simulated gastric acid exposure on the hardness, topographic, and colorimetric properties of machinable and pressable zirconia-reinforced lithium silicate glass-ceramics

Influence of coloring techniques on the surface characteristics and color stability of a monolithic zirconia ceramic

Evaluation of Color and Translucency of Stained and Glazed Monolithic Lithium Disilicates and Zirconia After Toothbrushing with Different Dentifrices and Thermocycling

Assessment of color stability and translucency of various CAD/CAM ceramics of different compositions and Thicknesses: An in vitro study

Impact of Gastric Acid Induced Surface Changes on Mechanical Behavior and Optical Characteristics of Dental Ceramics

Effect of mouthwashes on the color stability of a nanohybrid composite resin

Evaluation of the optical and surface properties of monolithic CAD-CAM ceramics after simulated tooth-brushing

Effect of Common Staining Beverages on Color Stability of Polymer-infiltrated Ceramics and Extra Translucent Zirconia: An In Vitro Study

Effect of Glazing Protocol on the Surface Roughness and Optical Properties of Lithia-Based Glass-Ceramics

Surface roughness and color measurements of glazed or polished hybrid, feldspathic, and Zirconia CAD/CAM restorative materials after hot and cold coffee immersion

Effects of different surface treatments on stainability of ceramics

The Effects of Beverages and Surface Treatments on the Color Stability of 3D-Printed Interim Restorations

Evaluating the Effect of Different Mouthrinses on Properties of the Enamel and Dental Composite Surfaces