Abstract:Purpose To explore the impact of zirconia types, coloring methods, and surface finishing on the color stability of monolithic multilayered polychromatic zirconia after artificial aging, including thermocycling and simulated toothbrushing. Materials and Methods Eighty square‐shaped zirconia samples were divided into 2 types (M3Y‐TZP and M6Y‐PSZ), further categorized based on coloring methods (precolored and extrinsically colored) and surface finishing techniques (mechanical polishing or glazing). The color stability was assessed using the CIEDE2000 formula. Artificial aging was simulated via thermocycling and toothbrushing. All samples were analyzed with a spectrophotometer to determine the post‐aging color changes (ΔE00). The ΔE00 were interpreted and classified using the 50:50% perceptibility threshold (PT) and the 50:50% acceptability threshold (AT). Comparisons between groups for ΔE00 differences were performed using three‐way ANOVA, with pairwise comparisons facilitated by Fisher's protected least significant difference test, α = 0.05. Results The study results indicated significant impacts of zirconia type, coloring method, and surface finishing on color stability. The M6Y groups experienced significantly greater color changes (6.61 ± 1.63) compared to the M3Y groups (3.40 ± 2.24), p < 0.0001. For both types of zirconia, extrinsically colored samples exhibited significantly higher ΔE00 when mechanically polished (p = 0.004). However, surface finishing had no significant effect on ΔE00 in precolored samples of either zirconia material (p = 1.000). The evaluation and categorization of ΔE00 variations indicated that nearly all color changes in the M6Y groups, regardless of being precolored, extrinsically colored, polished, or glazed, were deemed extremely unacceptable (Grade 1). In contrast, the M3Y groups showed more acceptable results, with the majority of color changes classified as moderately unacceptable (Grade 3). Conclusions The color stability of multilayered polychromatic zirconia is influenced by the type of material, extrinsic coloring, and the chosen surface treatment post‐artificial aging. The translucent 6Y‐PSZ exhibited lower color stability, especially with only mechanical polishing. For the fabrication of M3Y‐TZP and 6Y‐PSZ monolithic multilayered polychromatic zirconia restorations, extrinsic coloring should be paired with glazing to maintain color stability. Conversely, in the absence of extrinsic coloring, both glazing and mechanical polishing are effective in preserving color stability.

Evaluation of Color and Translucency of Stained and Glazed Monolithic Lithium Disilicates and Zirconia After Toothbrushing with Different Dentifrices and Thermocycling

Influence of Restoration Thickness and Resin Cement on Translucency and Color of Different Types of Monolithic Zirconia and Lithium Disilicate Ceramic

The Effects of Thermocycling on the Physical Properties and Biocompatibilities of Various CAD/CAM Restorative Materials

INFLUENCE OF AGING, BEVERAGES, AND MOUTH WASH SOLUTIONS ON THE MICROSTRUCTURAL AND COLOR STABILITY OF DIFFERENT DENTAL CERAMICS: AN IN VITRO STUDY

Staining and bleaching susceptibility of zirconia-reinforced lithium silicate glass-ceramics with different thicknesses, translucencies, and fabrication methods

Translucency and mechanical behavior of partially stabilized monolithic zirconia after staining, finishing procedures and artificial aging

Effect of toothbrushing with conventional and whitening dentifrices on monolithic zirconia after finishing procedures

Surface Characteristics of High Translucent Multilayered Dental Zirconia Related to Aging

Effect of artificial aging on optical properties of ultra-translucent zirconia ceramics of different brands

Color stability of precolored and extrinsically colored monolithic multilayered polychromatic zirconia: Effects of surface finishing and aging

Effect of surface roughness and biofilm formation on the color properties of resin-infiltrated ceramic and lithium disilicate glass-ceramic CAD-CAM materials

Effect of Coffee Thermocycling on Color Stability and Translucency of CAD-CAM Polychromatic High Translucent Zirconia Compared With Lithium Disilicate Glass Ceramic

Influence of coloring techniques on the surface characteristics and color stability of a monolithic zirconia ceramic

Assessment of color stability and translucency of various CAD/CAM ceramics of different compositions and Thicknesses: An in vitro study

Evaluation of Physical–Chemical Properties of Contemporary CAD/CAM Materials with Chromatic Transition "Multicolor"

Effects of two dentifrices on the surface properties and staining susceptibility of polymer-based materials

The Evaluation of Color and Surface Roughness Changes in Resin based Restorative Materials with Different Contents After Waiting in Various Liquids: An SEM and AFM study

Staining- and aging-dependent changes in color, translucency, and gloss of cloud-shade and one-shade resin composites

Effect of Thermocycling, Surface Treatments and Microstructure on the Optical Properties and Roughness of CAD-CAM and Heat-Pressed Glass Ceramics

Research of Optical Properties and Biocompatibility in Different Zones of Multilayered Translucent Zirconia on Hydrothermal Aging

Comparative Analysis of Modern 3D-Printed Hybrid Resin-Ceramic Materials for Indirect Restorations: An In Vitro Study