Abstract:A novel two‐dimensional titanium carbide (Ti3C2Tx) MXene film is introduced as an effective transparent conducting electrode in lead sulfide quantum dot photodiodes. Exhibiting exceptional near‐infrared transmittance control, interface engineering enhances performance, yielding high detectivity, extensive dynamic response, and notable bandwidth, thereby advancing infrared photodiode technology. The realization of a controllable transparent conducting system with selective light transparency is crucial for exploring many of the most intriguing effects in top‐illuminated optoelectronic devices. However, the performance is limited by insufficient electrical conductivity, low work function, and vulnerable interface of traditional transparent conducting materials, such as tin‐doped indium oxide. Here, it is reported that two‐dimensional (2D) titanium carbide (Ti3C2Tx) MXene film acts as an efficient transparent conducting electrode for the lead sulfide (PbS) colloidal quantum dots (CQDs) photodiode with controllable near infrared transmittance. The solution‐processed interface engineering of MXene and PbS layers remarkably reduces the interface defects of MXene/PbS CQDs and the carrier concentration in the PbS layer. The stable Ti3C2Tx/PbS CQDs photodiodes give rise to a high specific detectivity of 5.51 × 1012 cm W−1 Hz1/2, a large dynamic response range of 140 dB, and a large bandwidth of 0.76 MHz at 940 nm in the self‐powered state, ranking among the most exceptional in terms of comprehensive performance among reported PbS CQDs photodiodes. In contrast with the traditional photodiode technologies, this efficient and stable approach opens a new horizon to construct widely used infrared photodiodes with CQDs and MXenes.

High-sensitivity non-cooled near-infrared detector based on lithium niobate surface acoustic wave resonators combined with MXene Ti3C2Tx quantum dot thin films

Mid-Infrared Sensor Based on a Suspended Microracetrack Resonator With Lateral Subwavelength-Grating Metamaterial Cladding

Graphene Oxide and Polydimethylsiloxane Coated Quartz Tuning Fork for Improved Sensitive Near- and Mid-Infrared Detection.

Quantum Dot:MXene Interacted Bulk Heterojunction for Efficient Infrared Self-powered Photodetector

Near-infrared silicon quantum dots metal-oxide-semiconductor field-effect transistor photodetector

Interface Engineering to Drive High‐Performance MXene/PbS Quantum Dot Nir Photodiode

Highly Sensitive Ultraviolet Detector with ZnO Nanowires Film Prepared on LiNbO3 Surface Acoustic Wave" Wavelet Device

Mid-infrared Single Photon Detector with Superconductor Mo$_{80}$Si$_{20}$ Nanowire

A High Sensitivity Temperature Sensor Using High-<i>Q</i> NS-SAW Resonator

ZnO Quantum Dot/MXene Nanoflake Hybrids for Ultraviolet Photodetectors

Optomechanical Infrared Detector Monolithically Integrated with Micro-Metalens Array

High-performance near-infrared photodetector based on quasi one-dimensional layered (TaSe 4 ) 2 I

A Novel surface acoustic wave DMMP sensor coated with Zinc oxide quantum dots

Mid-infrared Single Photon Detector with Superconductor Mo0.8Si0.2 Nanowire

Skin-Like Near-Infrared II Photodetector with High Performance for Optical Communication, Imaging, and Proximity Sensing

Self-Powered Short-Wavelength Infrared Photodetectors Composed of MXene/InGaAs Heterostructures

A Simple Fused‐Ring Acceptor Toward High‐Sensitivity Binary Near‐Infrared Photodetector

Broadband infrared thermal detection using manganese cobalt nickel oxide thin film

Highly Sensitive Ultraviolet Sensor Based on ZnO Nanorod Film Deposited on ST-cut Quartz Surface Acoustic Wave Devices

Mid-infrared single photon detector with superconductor Mo$_{80}$Si$_{20}$ nanowire

ZnO@Ti 3 C 2 T x MXene Hybrid Composite-Based Schottky-Barrier-Coated SAW Sensor for Effective Detection of Sub-ppb-Level NH 3 at Room Temperature under UV Illumination