CO 2 Electrolysis System under Industrially Relevant Conditions
Yingying Cheng,Pengfei Hou,Xiuping Wang,Peng Kang
DOI: https://doi.org/10.1021/acs.accounts.1c00614
IF: 24.466
2022-01-19
Accounts of Chemical Research
Abstract:ConspectusCarbon dioxide emissions from consumption of fossil fuels have caused serious climate issues. Rapid deployment of new energies makes renewable energy driven CO<sub>2</sub> electroreduction to chemical feedstocks and carbon-neutral fuels a feasible and cost-effective pathway for achieving net-zero emission. With the urgency of the net-zero goal, we initiated our research on CO<sub>2</sub> electrolysis with emphasis on industrial relevance.The CO<sub>2</sub> molecules are thermodynamically stable due to high activation energy of the two C═O bonds, and efficient electrocatalysts are required to overcome the sluggish dynamics and competitive hydrogen evolution reaction. The CO<sub>2</sub> electrocatalysts that we have explored include molecular catalysts and nanostructured catalysts. Molecular catalysts are centered on earth abundant elements such as Fe and Co for catalyzing CO<sub>2</sub> reduction, and using Fe catalysts, we proposed an amidation strategy for reduction of CO<sub>2</sub> to methanol, bypassing the inactive formate pathway. For nanostructured catalysts, we developed a carbon enrichment strategy using nitrogen-rich nanomaterials for selective CO<sub>2</sub> reduction.Direct CO<sub>2</sub> electroreduction from the flue gas stream represents the "holy grail" in the field, because typical CO<sub>2</sub> concentration in flue gas is only 6-15%, posing a significant challenge for CO<sub>2</sub> electrolysis. On the other hand, direct electroreduction of CO<sub>2</sub> in the flue gas eliminates the carbon capture process and simplifies the overall carbon capture and utilization (CCU) scheme. However, direct flue gas reduction is frustrated by the reactive oxygen (5-8%), low CO<sub>2</sub> concentration (6-15%), and potentially toxic impurities. Surface CO<sub>2</sub> enrichment catalysts with high O<sub>2</sub> tolerance could be viable for achieving direct CO<sub>2</sub> electroreduction for decarbonization of flue gas.In addition to the electrocatalysts, the incorporation of catalysts into the electrolyzer and development of a suitable process was also investigated to meet industrial demands. A membrane electrode assembly (MEA) is a zero-gap configuration with cathode and anode catalysts coated on either side of an ion exchange membrane. We adopted the MEA configuration due to the structural simplicity, low ohmic resistance, and high efficiency. The electrode factors (for example, membrane type, catalyst layer porosity, and MEA fabrication method) and the electrolyzer factors (for example, flow channels, gas diffusion layer) are critical to highly efficient operation. We separately developed an anion-exchange membrane-based system for CO production and cation-exchange membrane-based system for formate production. The optimized electrolyzer configuration can generate uniform current and voltage distribution in a large-area electrolyzer and operate using an industrial CO<sub>2</sub> stream. The optimized process was developed with the targets of long-term continuous operation and no electrolyte consumption.
chemistry, multidisciplinary